AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330180-12-CN
-
Product Model330180-12-CN
-
Product Parameters3300 XL Proximitor Sensor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size7.8x2.8x6cm
-
ManufacturerBently Nevada
-
Weight0.2 kg
-
Total Length and Mounting Option1.0 meter (3.3 feet)
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
-
Output resistance50 Ω
-
Operating Temperature-52°C to +100°C (-62°F to +212°F)
-
Probe Tip MaterialPolyphenylene sulfide
Description
12 1.0 meter (3.3 feet) system length
no mounting hardware
CN CSA, ATEX, IECEx Approvals
3300 XL Proximitor Sensor
no mounting hardware
CN CSA, ATEX, IECEx Approvals
3300 XL Proximitor Sensor
Information
Overview
Manuals
Technical notes
Product Applications
Field Calibration & Gapping
Typical Machinery Applications
Features:
- Ideal for Compression Systems, Speed Measurements, and Fluid-Film Bearing Machines
- Extended Temperature Range Applications
- Complete Interchangeability of Units and Cabling
- Backwards Compatible with Other Non-3300 XL Series Transducer System Components
The 330180-12-CN Bently Nevada 3300 XL Proximitor Sensor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330180-12-CN 3300 XL Proximitor Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Bently Nevada 330180-12-CN is a 3300 XL Proximitor Sensor specifically configured for a 1.0-metre system length and regional safety compliance. It serves as the signal processing hub, converting the raw eddy current signal from a proximity probe into a usable voltage output for machinery protection systems,1.0 metre (3.3 feet) total system length; No mounting hardware,Accepts one non-contacting 3300-series 5 mm, 3300 8 mm, or 3300 XL 8 mm proximity probe and extension cable.
- Centrifugal & Axial Compressors: Monitors high-speed shaft vibration & thrust to prevent rotor-stator contact.
- Steam & Gas Turbines: Measures thermal expansion & rotor stability in power generation & drives.
- Heavy-Duty Pumps: Monitors high-pressure & process pumps to avoid fluid leaks or bearing failure.
- Electric Motors & Generators: Monitors large industrial rotors (1,000+ HP) for imbalance or misalignment.
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Connect the probe and cable to the PROBE jack on the Proximitor,Power the unit and measure the voltage between OUT and COM,Adjust the probe gap until the multimeter reads -9.0 Vdc (this is the center of the 80-mil linear range),
Verification: Move the probe a known distance (e.g., 10 mils) using a micrometer; the voltage should change by 2.0 Vdc (200 mV per mil).
This sensor is a core component for monitoring rotating and reciprocating machinery in critical industrial sectors:
Gas & Steam Turbines: Measuring radial vibration and axial thrust position to prevent rotor-to-stator contact.
Centrifugal Compressors: Monitoring shaft stability and bearing health in oil and gas processing.
Large Pumps & Motors: Essential for fluid-film (sleeve) bearing machines where contact-based sensors are ineffective.
Generators: Providing real-time displacement data for power plant condition-based maintenance.
FAQs
-
Is this product brand new?+Yes, Bently Nevada 330180-12-CN is brand new, original, unused, and factory sealed
-
What is the function of the 330180-12-CN?+It is a Proximitor sensor for measuring the displacement of a vibrating surface, crucial for monitoring the health of rotating machinery.
-
Is it compatible with older systems?+Yes. The 3300 XL Proximitor Sensor is backward compatible with 3300 5mm and 8mm probes, allowing for upgrades without replacing existing probes or extension cables in most cases.
-
What are the accuracy and range of 330180-12-CN?+This sensor provides high-precision measurements, typically within ±1 micrometer, with a frequency response range of 0 to 10 kHz
-
What power supply is required?+The sensor typically requires a power supply ranging from -17.5 Vdc to -26 Vdc (without barriers) at a maximum consumption of 12 mA. Operating at a more positive voltage than -23.5 Vdc can reduce the linear range.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
330103-00-14-10-01-003300 XL 8 mm Proximity Probe, 3/8-24 UNF Thread Without ArmourManufacturer: Bently NevadaView Details -
-
-
-
-
330101-00-49-90-02-053300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
-
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN