PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL Proximity Transducer
- 330171-00-30-10-02-BR
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 5 mm standard-mount proximity probe, 1/4-28 UNF-2A, without armor
Bently Nevada 330171-00-30-10-02-BR is a 3300 5 mm proximity probe with a three-inch imperial case and one-metre total length. This unarmored standard-cable configuration retains the BR approval selection and uses a ClickLoc termination without an included connector protector.
Used with the documented XL extension cable and Proximitor, the probe supports noncontact machinery position and vibration measurement where physical access favors the smaller package. Verify the complete channel, actual mounting clearances and BR certificate conditions; do not equate the probe's compact tip with narrow-sideview capability.
Used with the documented XL extension cable and Proximitor, the probe supports noncontact machinery position and vibration measurement where physical access favors the smaller package. Verify the complete channel, actual mounting clearances and BR certificate conditions; do not equate the probe's compact tip with narrow-sideview capability.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330171-00-30-10-02-BR
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · POSITION MONITORING
Thrust-bearing position in restricted physical spaces
The standard 5 mm family is intended for situations where physical space excludes a larger probe, including between thrust-bearing pads. A suitable XL chain measures the distance to the conductive target under the documented geometry constraints. -
02 · RADIAL VIBRATION
Compact probe mounting on bearing machinery
The probe serves a radial-vibration channel on fluid-film bearing equipment when its imperial case fits the selected mounting. BR approval conditions must be checked separately and cannot be inferred from the machinery application. -
03 · PHASE REFERENCE
Shaft reference sensing for machine monitoring
The family supports rotational phase-reference measurement in a compatible machinery-monitoring channel. The one-metre sensing assembly requires the correct remaining electrical length and suitable target geometry.
Technical specifications for 330171-00-30-10-02-BR
-
Product Model330171-00-30-10-02-BR
-
Product ParametersUnarmored proximity sensing probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread1/4-28 UNF-2A
-
Unthreaded length0.0 in
-
Overall case length3.0 in
-
Total probe length1.0 m
-
Cable armorUnarmored
-
Probe cable construction75-ohm triaxial cable with FEP insulation
-
Connector packageMiniature coaxial ClickLoc; no connector protector included
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Probe temperature range-35 to +177 deg C; pressure-seal caveat below -34 deg C
-
Nominal probe DC resistance7.59 +/- 0.50 ohm, center to outer conductor
-
Probe case-to-lead tensile rating222 N maximum rated
-
Minimum cable bend radius25.4 mm
-
Approval ordering optionBR ordering option; verify applicable INMETRO certificate and markings
View all additional
Alternative Names
330171-00-30-10-02-BR proximity probe
3.0 in imperial unarmored sensing probe
3300 5 mm 1.0 m imperial probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 5 MM
3300 5 mm proximity measurement chain
The 330171-00-30-10-02-BR probe uses a 3.0 in imperial case with a 1.0 m total assembly length. Bently Nevada describes the 3300 5 mm system with an XL extension cable and XL Proximitor; the published electrical lengths are five or nine metres including the extension cable.
The smaller probe package addresses physical mounting restrictions, such as the space between thrust-bearing pads. It does not reduce the standard sideview-clearance or tip-spacing requirements, and it must not be described as an NSv system merely because its tip is small.
Confirm 1/4-28 mounting and the 0.375-inch engagement limit, maintain the minimum cable bend radius and provide appropriate connector protection for the 02 termination. Review the actual BR markings and applicable certificate for this order.
Features:
- Five- or nine-metre documented electrical chain
- Small packaging does not provide NSv clearance
- 0.375-inch maximum imperial thread engagement
The Bently Nevada 330171-00-30-10-02-BR Noncontact proximity sensing probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
A replacement for this order must preserve the 3.0 in case, zero unthreaded option, 1.0 m total length and unarmored standard-cable termination. The full 330171-00-30-10-02-BR identifier is needed to avoid mixing physical length fields or changing the selected approval configuration.
The manufacturer permits the documented XL Proximitor and extension cable with the 3300 5 mm probe, but system performance remains limited to the non-XL 3300 specifications. An 8 mm alternative also requires a physical-fit review; NSv migration has different system requirements.
No model-specific hardware revision, discontinuation date or unconditional replacement order was established in the reviewed official sources. Confirm any proposed substitute against the full mechanical configuration, electrical chain and applicable certification before changing the installed measurement system.
Features:
- Keep complete 330171 ordering identity
- XL parts do not remove non-XL performance limits
- Approval and target requirements need separate checks
The Bently Nevada 330171-00-30-10-02-BR Noncontact proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330171-00-30-10-02-BR Noncontact proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330171-00-30-10-02-BR
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is BR a hardware revision identifier?
No. The official approval guide lists BR as a hazardous-area approval ordering option for 330171. It is not evidence of a hardware revision or manufacture date. -
Does BR alone prove the installed circuit complies with every requirement?
No. BR covers applicable INMETRO requirements and may include applicable ATEX/IECEx markings. The unit certificate, product marking and complete installation conditions must still be reviewed. -
What lengths are selected by 30 and 10 in this order?
For the imperial 330171 grammar, 30 is a three-inch overall case and 10 is a one-metre total probe length. The initial 00 specifies zero unthreaded length. -
Can the one-metre probe be connected as a one-metre 3300 5 mm system?
The reviewed 3300 5 mm datasheet specifies five- or nine-metre systems including the extension cable. Do not transfer the standard XL 8 mm probe-only one-metre configuration to this family without explicit applicability evidence. -
Is environmental connector protection already included?
The 02 option does not include the connector protector. The manufacturer recommends protectors for installations and offers them separately; silicone tape has a specific caution where turbine oil can contact the connection. -
What must be considered when mounting the probe between thrust-bearing pads?
The smaller package may resolve physical space limits, but standard sideview and tip-to-tip spacing constraints remain. Verify the target geometry and the documented thread-engagement limit rather than relying only on tip diameter. -
May a different approval-suffix probe be accepted as an automatic replacement?
No. Preserve the complete mechanical and electrical selections and assess the applicable approval requirement separately. The reviewed official records do not establish an unconditional replacement with another suffix.
READY TO VERIFY YOUR PART?
Get a 330171-00-30-10-02-BR quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
