AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 330186-02
In Stock
Ships by Wednesday, July 8
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330186-02
-
Product Model330186-02
-
Product Parameters3300 XL Shaft Micrometer
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size15.2x24.6x35.6cm
-
ManufacturerBently Nevada
-
Weight2.8 kg
-
Scale UnitsMetric
-
Measuring Range0–25 mm
-
Resolution0.01 mm
-
Accuracy±0.003 mm
-
Measurement PrinciplePrecision spindle micrometer
-
Spindle Thread Pitch0.5 mm
-
Thimble Graduation0.01 mm
Description
The 330186-02 is a shaft micrometer from the Bently Nevada 3300 XL accessories product family, manufactured by Bently Nevada (Baker Hughes). It is configured in metric units with a 0 to 50 mm measurement range and a C-frame design specifically for measuring cylindrical shafts.
The 3300 XL Shaft Micrometer is primarily used to check theoutput signal of a Proximitor Sensor when viewing the rotorshaft or a reciprocating compressor piston rod. A strapattaches to a mounting base, is wrapped around the target,and is tightened to hold the mounting base firmly in position.A spindle micrometer verifies the Proximitor Sensor outputsignal. A probe mounting adapter holds the probe in themounting base, and the micrometer moves the probe3300XL Monitor and TransducerVerification KitsDatasheetBently Nevada Machinery Condition Monitoring 141196 Rev. Ftoward and away from the target in calibratedincrements. The output from the ProximitorSensor is recorded using a voltmeter.
The micrometer is a precision mechanical measuring instrument featuring a hardened steel C-frame with satin chrome finish and a 60-degree V-anvil that centers on cylindrical shafts for accurate diameter measurement. The spindle and anvil measuring faces are ground and micro-lapped for precision. The spindle thread pitch is 0.5 mm with thimble graduation of 0.01 mm, providing a resolution of 0.01 mm (0.4 mil) and accuracy of ±0.01 mm.
The 3300 XL Shaft Micrometer is primarily used to check theoutput signal of a Proximitor Sensor when viewing the rotorshaft or a reciprocating compressor piston rod. A strapattaches to a mounting base, is wrapped around the target,and is tightened to hold the mounting base firmly in position.A spindle micrometer verifies the Proximitor Sensor outputsignal. A probe mounting adapter holds the probe in themounting base, and the micrometer moves the probe3300XL Monitor and TransducerVerification KitsDatasheetBently Nevada Machinery Condition Monitoring 141196 Rev. Ftoward and away from the target in calibratedincrements. The output from the ProximitorSensor is recorded using a voltmeter.
The micrometer is a precision mechanical measuring instrument featuring a hardened steel C-frame with satin chrome finish and a 60-degree V-anvil that centers on cylindrical shafts for accurate diameter measurement. The spindle and anvil measuring faces are ground and micro-lapped for precision. The spindle thread pitch is 0.5 mm with thimble graduation of 0.01 mm, providing a resolution of 0.01 mm (0.4 mil) and accuracy of ±0.01 mm.
Alternative Names
330186-O2
330I86-02
33OI86-02
330I86 02
330I86 O2
33OI86 02
Information
Overview
Manuals
Application Notes
Product Applications
Comparison with Related Models
Features:
- Primarily Used for Rotor Shaft and Piston Rod Verification
- Strap-Mounted Base for Secure Attachment
- Spindle Micrometer for Calibrated Probe Movement
- Probe Mounting Adapter for Secure Probe Holding
The micrometer is a precision mechanical measuring instrument featuring a hardened steel C-frame with satin chrome finish and a 60-degree V-anvil that centers on cylindrical shafts for accurate diameter measurement. The spindle and anvil measuring faces are ground and micro-lapped for precision. The spindle thread pitch is 0.5 mm with thimble graduation of 0.01 mm, providing a resolution of 0.01 mm (0.4 mil) and accuracy of ±0.01 mm.
A ratchet stop mechanism ensures consistent measuring force, eliminating operator-dependent variations. A spindle locking device holds the measurement reading for transfer or recording. The zero point is adjustable for calibration verification.
The 330186-02 Bently Nevada 3300 XL Shaft Micrometer may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330186-02 3300 XL Shaft Micrometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 330186-02 is commonly used when verifying vibration, shaft position, thrust position, and rod drop measurement systems. It is also suitable for generating calibration curves when configuring reciprocating compressor Rod Drop Monitors, ensuring that the monitor accurately reflects probe displacement over the required operating range.
The kit includes interchangeable probe mounting adapters compatible with a wide range of Bently Nevada proximity probes, including 3300 XL 5 mm, 3300 XL 8 mm, 3300 XL 11 mm, 3300 XL 14 mm, 3300 NSv, 3300 RAM, and 7200 Series transducer systems. This broad compatibility allows a single verification instrument to support multiple machinery monitoring applications across different equipment types.
- Oil/Gas Refineries: Tests eddy current probes tracking turbo-machinery like process compressors and high-pressure pumps.
- Power Generation: Calibrates vibration probes on turbine rotors and differential expansion in gas/steam/hydro plants
- Industrial Manufacturing: Confirms specs on critical rotating elements, mixers, and fluid-film bearing assets
- Marine Automation: Used in service/acceptance testing of shipboard propulsion, automation, and thrusters
- Radial Vibration Loops: Verifies calibration of proximity probes measuring shaft movement and orbit trajectories
- Axial Position Loops: Calibrates sensors tracking static thrust displacement of rotor relative to casing
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
330185-02 (Precision Micrometer): This is a standalone benchtop or casing-mounted gauge. It features a heavy-duty frame designed to hold a proximity probe rigidly in place over a flat target button. It is primarily used for acceptance testing or validation in a workshop or laboratory environment.
330186-02 (Shaft Micrometer): This tool features a specialized mounting base and a flexible strap mechanism. The strap wraps directly around a large-diameter machine target—such as a compressor piston rod or a turbine rotor shaft. This allows field engineers to perform in-place system verification without stripping down the machinery.
330186-02 (Shaft Micrometer): This tool features a specialized mounting base and a flexible strap mechanism. The strap wraps directly around a large-diameter machine target—such as a compressor piston rod or a turbine rotor shaft. This allows field engineers to perform in-place system verification without stripping down the machinery.
Technical notes
When using the 330186 to generate an output curve for programming a Rod Drop Monitor on a reciprocating compressor, it is important to use the buffered output signal on the front of the rod drop monitor rather than the output signal on the Proximitor Sensor. This is because the Rod Drop Monitor is programmed by the user based on the signal at the monitor, and this signal will vary from the output signal on the Proximitor Sensor if intrinsic safety barriers are being used. The 330186 ensures accurate programming by enabling verification at the monitor level.
FAQs
-
What is 330186-02?
+The Bently Nevada 330186-02 is a 3300 XL series shaft micrometer calibrated in metric units (0-25 mm) -
What is the difference between the -02 and the -01?
+Both are Bently Nevada shaft micrometers used to simulate physical shaft movement, but the -02 is calibrated in metric units (0-25 mm), while the -01 is calibrated in English units (0-1 inch). -
What does the kit include?
+The unit comes with probe mounting adapters for multiple thread sizes (1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, M8, M10, M14, and M16). -
What measurement units does this model use?
+The -02 suffix designates metric scale units covering a measurement span of 0 to 25 mm.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN