PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Machinery rack interface module
Bently Nevada 135031-01 is a rack communication I/O module. The rear assembly provides the documented rack communication connection. It is not an independent machinery monitor. Different modem, serial and data-manager I/O versions have different protocols, cabling and data-transfer limits that must match the installed host arrangement.
The official spare table lists 135031-01 as RIM I/O with modem interface. Compare its communication connection and installed rack interface before replacement. This spare identity does not establish the host software setup, an Ethernet interface or a complete monitoring system.
The official spare table lists 135031-01 as RIM I/O with modem interface. Compare its communication connection and installed rack interface before replacement. This spare identity does not establish the host software setup, an Ethernet interface or a complete monitoring system.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500/20 rack interface system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · RACK CONFIGURATION
Controlled monitor-system setup
The proprietary interface supports rack configuration and retrieval of machinery information. Its keylock provides a way to restrict changes while normal rack operation continues. -
02 · DATA COLLECTION
External processor connections
Compatible TDXnet, TDIX or DDIX arrangements collect machinery information through the selected interface. The I/O variant determines the available connection and data rate. -
03 · RACK STATUS
Common rack controls and indications
The interface provides common rack indications and documented control contacts. It is not in the critical monitoring path, and a communications function must not be confused with an individual protection measurement.
Technical specifications for 135031-01
-
Product Model135031-01
-
Product ParametersMachinery rack interface module
-
In stock7 units
-
ManufacturerBently Nevada
-
Documented spare functionRIM I/O with modem interface
-
Associated interface3500/20 Rack Interface Module
-
Communication protocolBently Nevada proprietary
-
Data rate14.4 kbaud maximum
-
External cable allowance2.1 m maximum
-
Port arrangementHayes AT-compatible modem
-
Operating temperature0 to +50 deg C
-
Storage temperature-40 to +85 deg C
-
Humidity limit95%, noncondensing
-
System contactsTrip Multiply, Alarm Inhibit and Rack Reset
View all additional
Alternative Names
135031 01
135031-01 rack communication I/O module
Bently Nevada 135031-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
MACHINERY RACK INTERFACE MODULE
Integrating 135031-01
The rear assembly provides the documented rack communication connection. It is not an independent machinery monitor. Different modem, serial and data-manager I/O versions have different protocols, cabling and data-transfer limits that must match the installed host arrangement.
The RIM supports compatible TDXnet, TDIX and DDIX external processors. TMR applications require a TMR RIM, not the standard 125744-02 spare. A replacement with a newer rack interface must be assessed against every installed monitor and software requirement.
Follow RIM operation and maintenance manual 129768. Place the front interface in slot 1 beside the supplies and match its rear I/O. Check the selected serial or modem cable and configuration keylock before rack changes; preserve the running machinery-protection arrangement.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 135031-01 rack communication I/O module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 135031-01 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The RIM supports compatible TDXnet, TDIX and DDIX external processors. TMR applications require a TMR RIM, not the standard 125744-02 spare. A replacement with a newer rack interface must be assessed against every installed monitor and software requirement.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 135031-01 rack communication I/O module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 135031-01 rack communication I/O module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5x11.2x24.2cm
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 135031-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 135031-01 identified?
The official spare table lists 135031-01 as RIM I/O with modem interface. Compare its communication connection and installed rack interface before replacement. This spare identity does not establish the host software setup, an Ethernet interface or a complete monitoring system. -
What is the function of this component?
The rear assembly provides the documented rack communication connection. It is not an independent machinery monitor. Different modem, serial and data-manager I/O versions have different protocols, cabling and data-transfer limits that must match the installed host arrangement. -
Which installed equipment must be matched?
The RIM supports compatible TDXnet, TDIX and DDIX external processors. TMR applications require a TMR RIM, not the standard 125744-02 spare. A replacement with a newer rack interface must be assessed against every installed monitor and software requirement. -
Where is this component used?
The proprietary interface supports rack configuration and retrieval of machinery information. Its keylock provides a way to restrict changes while normal rack operation continues. -
What must be checked during installation?
Follow RIM operation and maintenance manual 129768. Place the front interface in slot 1 beside the supplies and match its rear I/O. Check the selected serial or modem cable and configuration keylock before rack changes; preserve the running machinery-protection arrangement. -
Does the standard RIM perform TMR monitor comparison?
The manufacturer assigns that comparison function to the TMR RIM. A standard RIM is not a substitute for the TMR version in an application requiring that configuration. -
Does RUN mode stop normal machinery monitoring?
No. RUN allows normal rack operation and prevents configuration changes. PROGRAM also allows normal operation, but permits local or remote configuration changes; follow site authorization before using it.
READY TO VERIFY YOUR PART?
Get a 135031-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
