PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 21505-00-44-10-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Standard mount proximity probe - 21505-00-44-10-02
Bently Nevada 21505-00-44-10-02 is a 8 mm, standard-mount 7200 proximity probe identified in the manufacturer's historical ordering catalogue. This configuration has 3/8-24 threads, a 4.4-inch case, a 1-metre integral lead and a miniature male coaxial connector, with stainless-steel lead armor.
The probe forms part of a matched eddy-current measurement system for conductive-target position and shaft vibration. Select the extension and Proximitor for the required total electrical length. Historical catalogue specifications do not establish a current discontinuation date, hardware revision or approved successor.
The probe forms part of a matched eddy-current measurement system for conductive-target position and shaft vibration. Select the extension and Proximitor for the required total electrical length. Historical catalogue specifications do not establish a current discontinuation date, hardware revision or approved successor.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 21505-00-44-10-02
These are manufacturer-documented proximity measurement scenarios. The 7200 catalogue establishes the family measurement role; the cited diagnostic cases do not identify this exact order as installed. Historical component and calibration requirements still apply.
-
01 · TURBINE-GENERATORS
Shaft-vibration signals during turbine run-up
Bently Nevada reports turbine-generator rub investigations using proximity-probe signals. The 7200 documentation supports this measurement class; the probe belongs in a correctly matched sensing chain. -
02 · PROCESS COMPRESSORS
Radial monitoring for compressor seal diagnostics
An official centrifugal-compressor case uses X-Y shaft signals to investigate seal rubbing. For a suitable 7200 installation, the probe supports that sensing path; diagnostic equipment interprets the signals, not the component alone. -
03 · THRUST MONITORING
Axial shaft-position measurements
The manufacturer documents static position measurement in this transducer family. A probe serves the matched probe-to-conditioner chain at an engineered axial target. Mechanical fit, initial gap and complete electrical length must be checked for 21505-00-44-10-02.
Technical specifications for 21505-00-44-10-02
-
Product Model21505-00-44-10-02
-
Product ParametersStandard mount proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Probe tip diameter8 mm
-
Mounting arrangementStandard mount
-
Case thread3/8-24
-
Lead armorStainless-steel armor
-
Unthreaded case length0 in
-
Overall case length4.4 in
-
Total integral lead length1 m
-
ConnectorMiniature male coaxial
-
Matched-system nominal scale factor200 mV/mil; historical 7200 system reference conditions
-
Matched-system linear range80 mils (2 mm); historical 7200 system, not case length
View all additional
Alternative Names
21505 00 44 10 02
21505-00-44-10-02 product identification reference
Bently Nevada 21505-00-44-10-02
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
7200 PROXIMITY TRANSDUCER SYSTEM
Integrate the matched 7200 sensing chain
The historical manufacturer table identifies 21505-00-44-10-02 as a 8 mm standard-mount probe with 3/8-24 threads and stainless-steel lead armor.
The case is 4.4 inches long with zero unthreaded length; the integral lead is 1 metre. The miniature male coaxial connection is the documented 02 option. Select the extension and Proximitor together for the required five- or nine-metre sensing chain.
The catalogue gives 200 mV/mil and 80 mils of linear range for the matched system, under its stated reference conditions. Those values are not an independent probe calibration certificate. Follow the exact installation instructions and verify the target and gap.
Features:
- 8 mm standard-mount probe
- 3/8-24 case thread
- Match total sensing-chain length and Proximitor calibration
The 21505-00-44-10-02 proximity probe requires matched components before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare 21505-00-44-10-02 against the original 3/8-24 mounting, 4.4-inch case, 1-metre lead, connector and armor selection. A similar family prefix does not establish complete interchangeability.
The historical catalogue describes interchangeability within matching 7200 component types and lengths. It does not establish a drop-in change to 3300 XL or NSv, or remove the need to check the installed Proximitor calibration.
The reviewed manufacturer evidence does not establish an exact-order hardware revision, discontinuation date or designated successor. Do not interpret the age of the catalogue or its document version as a current lifecycle statement.
Features:
- Compare the complete historical order configuration
- Do not assume XL or NSv interchangeability
- No current successor or lifecycle date established
The 21505-00-44-10-02 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 21505-00-44-10-02 product identification reference must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21505-00-44-10-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the 44 field specify a 44 mm case?
No. This English-thread 21505 configuration uses tenths of an inch. The 44 field specifies a 4.4-inch overall case; the metric ordering rule must not be applied to it. -
Is 21505-00-44-10-02 an armored probe?
Yes. Table 1 identifies 21505 as an 8 mm standard-mount probe with stainless-steel lead armor and 3/8-24 threads. The 10 option is a one-metre total integral lead. -
What does the probe measure in a matched 7200 system?
It senses distance to a conductive target through the eddy-current principle. The matched system supports static shaft position and dynamic vibration; the probe does not diagnose a machine fault by itself. -
What must match before a replacement is fitted?
Compare case reach, thread, armor, connector and integral lead, then match the extension and Proximitor calibration. A 3300 XL family label does not demonstrate equivalence to this historical 7200 probe. -
Is the 4.4-inch case also the sensing range?
No. Case length is mounting geometry. The historical catalogue specifies an 80-mil linear range for the complete calibrated 7200 system under its reference conditions.
READY TO VERIFY YOUR PART?
Get a 21505-00-44-10-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
