
























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
VERSAMAX OUTPUT MODULE
IC200MDL740
OUTPUT MODULE
VERSAMAX
DISCRETE
24 VDC POSITIVE LOGIC
0.5 AMP PER POINT
16 POINT
VersaMax CPUE05 with Ethernet Interfaces
Series:VersaMax
Part Number:IC200CPUE05
Description:CPU module
Modules:64
I/O points:2048
Serial ports:RS 232, RS 485
Boolean Execution Speed:0.8 milliseconds
Memory:64 K bytes
SRTP Server:8 connections
Ethernet Port:One (1) RJ45 port
Ethernet Transmission:10 Mbps, full / half duplex
EGD configuration:32 configurations
VersaMAx controller module
Series:VersaMax
Part Number:IC200CPUE05
Description:CPU module
Modules:64
I/O points:2048
Serial ports:RS 232, RS 485
Boolean Execution Speed:0.8 milliseconds
Memory:64 K bytes
SRTP Server:8 connections
Ethernet Port:One (1) RJ45 port
Ethernet Transmission:10 Mbps, full / half duplex
EGD configuration:32 configurations
DC power supply input module
Brand:GE Fanuc
Series:Versamax
Part Number:IC200PWR001
Product Type:DC Power Supply
Input Voltage:24 Volts DC
Output Voltage:5 Volts DC and 3.3 Volts DC
Input Power:11 Watts
Holdup Time:10 Milliseconds
Total Output:1.5 A maximum
3.3V Output Current:0.25 A maximum
Analog Input Module
Series:Versamax
Part Number:IC200ALG263
Product Description :Analog Input Module
Number of Inputs:15, single-ended
Input Voltage:-10 Volts to 10 Volts
Input Impedance:100K Ohms minimum
Resolution:+/- 15 bits
Update Rate:7.5 ms
LED Indicators:OK LED
VersaMax CPUE05 Controller
Program Storage:System flash, battery-backed RAM
Power Requirements:5V uses 220mA, 3.3V uses 570mA
Floating :Pointyes
Boolean Execution Speed:0.8 ms/K (typical)
Realtime Clock Accuracy (for timer functions):100ppm (0.01%) or +/- 9sec/day
Time of Day Clock Accuracy:100ppm at full temperature range
Embedded Communications:RS-232, RS-485, Ethernet
Configurable Memory:64K bytes maximum
Ethernet Data Rate:10Mbps (half- or full-duplex)
Ethernet Port:RJ-45, UTP
Number of SRTP Server Connections:8
Micro Controller
DC Inputs: 16
DC Outputs: 1 (24 V)
Relay Outputs: 11 (Normally-Open), 2 A
Nominal Power Requirement: 100-240 V
Voltage Type: DC
Series: VersaMax
Discrete input module
Input voltage 0 to +30VDC,+24VDC nominal
On state voltage +15 to +30VDC
Off state voltage 0 to +5VDC
Off state current 2.0 to 5.5mA0 to 0.5mA
Off response time 0.5ms maximum
Configurable filtertime0 ms, 1.0ms (default), or 7.0ms
Input impedance 10kOhms maximum
INPUT MODULE
Series:VersaMax
Part Number:IC200ALG620
Description:Analog input module
Product Description:4-point RTD / Resistance input module
Resolution:16 bits
Update Rate:210 milliseconds
Compatible RTD Wiring type:3-wire and 4-wire RTDs
Bus Voltage:5 Volts DC
Resistance input range:0-500 Ohms; 0-3000 Ohms
Isolation (Input to Frame):1500 Volts AC
Digital Resolution:15 bits plus sign
Isolation (Input to Logic):250 Volts AC
Frequency:50-60 Hertz
Temperature:0-60 degrees Celsius
Maximum lead resistance:5 ohms per lead
Analog Input Thermocouple Module
Thermocouple types J, K, T, S, R, none (used for mV inputs)
Spans (+/–) 19.5mV, 39mV, 78.125mV, 156.25mV, 312.5mV,625mV
Converter resolution 15 bits + sign
Conformity error +/–0.3 degree Celsius, +/–0.5 degree Fahrenheit.
Normal mode rejection 60dB, at 50/60 Hz, 100% span
Common mode rejection 120 dB at 50/60Hz, 100 ohm imbalance
Common mode voltage 3 VDC maximum
Analog Output module
No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption: 50 mA from +5V bus
Discrete Output Module
Series:Versamax
Part Number:IC200MDL740
Number of Points:16 Outputs
Number of groups:1
Group to Group Isolation:None
Point to Point Isolation:None
Fuse:None
Analog input module
Manufacturer:GE Fanuc
Series:Versamax
Part Number:IC200ALG240
Product Type:Analog Input Module
Number of Inputs:8
Intelligent Module:Yes
Input Data:16-Bit Input Data
Operating Modes:Current Mode or Voltage Mode
Current Range:1 to 20 milliamps
Voltage Range:-10 to 10 Volts DC

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.