















Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
Ethernet slave module
Series:Versamax
Part Number:IC200EBI001
Bulletin:IC200
Product Type:Ethernet Network Interface Unit
Ethernet topology:Linear / Point-to-Point
LED Indicators:5
Maximum distances between nodes:100 meters
Mounting:DIN Rail
Connector:RJ45
Number of Modules:8 per NIU/Station
Cable Type:CAT 5
No. of Discrete I/O:1024
No. of discrete inputs:512
Network Dependent:Yes
No. of discrete outputs:512
POWER SUPPLY MODULE
Series:Versamax
Part Number:IC200PWR002
Lifecycle Status:Active
Input Voltage:24 Volts DC
Input Voltage, range:18-30 VDC
Extended Power:Yes
Input Power:11 W
Isolated Power:No
Total output current:1.5 Amperes
Holdup Time:10 ms
Total Output Current:1.5 A maximum
3.3V Output Current:0.25 A maximum
Output current at 5VDC:1.5 A, maximum
ANALOG EXPANSION UNIT
IC200UEX626
ANALOG EXPANSION UNIT
VERSAMAX
6 CHANNELS
4 INPUTS
-10-10 VDC / 0-10 VDC / 4-20 MA / 0-20 MA
2 OUTPUTS
0-10 VDC / 4-20 MA / 0-20 MA
24 VDC POWER SUPPLY
MICRO CONTROLLER
IC200UDD064
MICRO CONTROLLER
VERSAMAX
64 POINT PLC
40 INPUTS AT 24 VDC
24 OUTPUTS WITH 24 VDC SOURCE
WITH ESCP
24 VDC POWER SUPPLY
Genius Network Interface Unit
INTERFACE MODULE
REMOTE I/O
GENIUS NETWORK
153.6 KBAUD EXTENDED
38.4/76.8/153.6 KBAUD STANDARD
Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points
No. of channels:Thirty-Two (32)
Current per Point:0.5 Amperes
Output Voltage Range:+10.2 to +30VDC
No. of input groups:Two (2)
Backplane Current:90 milliamperes
Output voltage, nominal:12 / 24VDC
No. of channel per group:Sixteen (16)
Current Draw:90 mA, maximum
External Power supply:+10.2 to +30VDC
Analog input 12 bit voltage/current 8 channel
IC200ALG260
INPUT MODULE
VERSAMAX
ANALOG
8 POINT
12 BIT
0-10 VDC / +/-10 VDC
4-20 MA
Discrete Input Module
Series:Versamax
Part Number:IC200MDL241
Description:Discrete Input Module
Operating Voltage:240 Volts AC
Backplane Current Rating:110 milliamps
Maximum Response Time (On):1 Cycle
Built-in Power:Yes
Number of Inputs:16 Discrete Inputs
Group Isolation:Yes
Digital Input Module
IC200MDL650
INPUT MODULE
VERSAMAX
DISCRETE
24 VDC POSITIVE LOGIC
32 POINT
CPU Module
Series:Versamax
Part Number:IC200CPU001
Description:Configurable CPU
Product type:CPU module
Serial Ports:2
User Memory:34K Bytes
Product Description:Central Processing Unit (CPU)
Floating point math:Supported
Discrete Internal Bits:1024 points
Discrete Inputs:2048 points
Discrete Temporary Bits:256 points
Discrete Outputs:2048 points
Boolean Execution Speed:1.8 ms / K
Type of Memory Storage:RAM and Flash
Modbus Registers:32
Real-Time Clock Accuracy:100 ppm
Global Discrete Bits:1280 points
Floating Point data:Supported
Battery Backed RTC:Installed
Override functions:Supported
Compact I/O Carrier
Series:VersaMax
Product Type:Compact box-style I/O carrier
No. of Terminals:36 terminal
Single-Wire Cross Section:0.36 mm2 to 2.1 mm2
Two-Wire Cross Section:Up to 0.86 mm2
Current rating per point:2 A
Voltage rating:0-264 VAC
Current per Point:2 Amps
Current rating per each power terminal:8A
Current rating, per point:2 Amperes
Voltage supply, max:264 VAC
Current rating per ground and power segment:8 Amperes
Maximum Voltage per Point;264 Volts AC
Transient voltage, max:300 VAC
Discrete Input Module
Series:Versamax
Part Number:IC200MDL643
Product Description:Discrete Input Module
Number of Points:16 Inputs
Number of groups:2
Input Impedance:2.4K Ohms
OUTPUT MODULE
Series:VersaMax
Part Number:IC200ALG331
Output signal, nominal:4-20 mA; +/- 10 VDC
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
Backplane current:10 mA @ 5VDC; 115 mA @ 3.3 V
Configurable output default:Hold Last State; 0 (configurable)
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
VERSAMAX OUTPUT MODULE
IC200MDL940
OUTPUT MODULE
VERSAMAX
DISCRETE
RELAY OUTPUT
5/24/125 VDC / 120/240 VAC
2 AMP PER POINT
16 POINT
ISOLATED FORM A
Power supply module
Part Number:IC200PWR102
Series:VersaMax
Input Voltage, range:85-132 VAC; 176 - 264 VAC
Input Voltage:120/240 Volts AC
Product type:Expanded Power Supply
Output current, Total:1.5 A, maximum
Input frequency:47-63 Hz
Output Voltage:5 Volts DC and 3.3 Volts DC
Output Voltage:5 VDC; 3.3 VDC
input voltage, nominal:120 VAC; 240 VAC
Total output current:1.5 Amperes
Input Power:27 VA
Input frequency:47-63 Hz
Output current at 3.3 VDC:1.0 A, maximum
Holdup Time:20 ms
Input power:27 VA
Output current at 5VDC:1.5 A, maximum
Total Output Current:1.5 Amperes Maximum
Holdup time:20 ms
Output voltage:5.5 VD; 3.3 VDC
Analog Output, 13 Bit Current, 8 Channel
Series:Versamax
Part Number:IC200ALG326
Type:Output module
Channels:8 single ended
LED:Two
Resolution:15 Bits
Update Rate:15 ms maximum
Output Default:Configurable

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.