AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC697MDL940
-
Product ModelIC697MDL940
-
Product ParametersOUTPUT MODULE
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size4x22x29.1cm
-
ManufacturerGeneral Electric
-
Weight0.66 kg
-
No. of channels per groupFour (4) per group
-
Output configurationEight (8) Form C relay outputs; Eight (8) Form A outputs
-
Frequency47 to 63 Hertz (for AC voltage only)
-
Load current (maximum)16 Amps per module, 4 Amps per group
-
Output leakage (maximum)1 milliAmp at 120 Volts AC
-
Switching Frequency20 cycles/minute (inductive load)
-
Rated voltage120/240 Volts AC or 5/24/125 Volts DC
Description
IC697MDL940
OUTPUT MODULE
16 POINT RELAY OUTPUT
16 AMPS
120/240 VAC OR 5/24/125 VDC
480 VA OR 60 WATTS
OUTPUT MODULE
16 POINT RELAY OUTPUT
16 AMPS
120/240 VAC OR 5/24/125 VDC
480 VA OR 60 WATTS
Information
Overview
Manuals
Technical notes
Product Applications
Field Wiring
Features:
- 16 points - 8 isolated Form C- 2 groups of 4 Form A
- 2 amp per point switching capacity
- RC snubber and fuse protection per point
- No user power required
- Removable field wiring terminal
The IC697MDL940 GE OUTPUT MODULE may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC697MDL940 OUTPUT MODULE Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Configuration is done using the configuration function of the MS-DOS or Windowsprogramming software running on Windows 95 or Windows NT overEthernet TCP/IP or through the SNP port. The Programming Software configuration function is installedon the programming device. The programming device can be an IBM XT, AT, PS/2 or compatible Personal Computer. This module includes a mechanical key that preventsinadvertent substitution of one module type foranother in a given slot. The key fits a uniquelyshaped area on the board below the connector. Eachmodule has a key packaged with it.When the module is first installed, the key latchesonto the backplane center rail. When the module isextracted, the key remains in the center rail, configuring the slot to accept only identical module types.If it is necessary to change the module location in therack after the key has been latched onto the center railof the rack, the key can be removed by pushing it upward to unhook the latch while pulling it off the rail.It may then be reinserted onto the module and themodule inserted into the rack in the desired location.
- Automotive Assembly Plants:Millisecond-precise robot painting & 12-axis arm sync with conveyors
- Power Generation & Substation Control:Gas/steam plant turbine startup & grid generator sync
- Water & Wastewater Treatment:Pump/valve networks with real-time chemical dosing
- Oil & Gas Refineries:ESD & F&G detection for high-risk refinery safety
- Paper & Pulp Mills:Legacy heavy machinery & complex process loop control
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
The module is wired .You havethe choice of selecting either a normally open or anormally closed relay contact (or both) for each of theeight Form C relays, and four normally open contactsfor each group of Form A relays. A connection is provided at the V terminal for a power source for theload. Each Form C relay and each group of the FormA relays can switch either an AC or a DC load.The detachable field wiring terminal board will acceptwire sizes from AWG #22 (0.36 mm) through AWG#14 (2.1mm). Two wires may be terminated on agiven lug if both wires are the same size. There isroom for a bundle of forty #14 wires to be routed outthrough the terminal board cavity.The wire bundle can be secured to the terminal boardby passing a cable tie through a cleat located at thelower corner of the terminal board.
FAQs
-
What is IC697MDL940?+The GE IC697MDL940 is a 16-point relay output module designed for the GE Fanuc Series 90-70 PLC system. It is used to control various low-to-medium power loads.
-
What is the output configuration of IC697MDL940?+This module contains 16 output points, consisting of 8 isolated Type C (single-pole double-throw) relays and 8 Type A (single-pole single-throw) relays, divided into two groups of 4.
-
What type of terminal board does it use?+It uses a removable field wiring terminal, which can handle wire sizes from AWG #22 to AWG #14
-
How to monitor the output of IC697MDL940?+The LED indicators on the top of the module show the on/off status of each output point on the logic side (PLC side).
-
What is the best way to troubleshoot it?+A common test is the "light test," where you check for clicks and verify output using the PLC table, ensuring a complete circuit with your load.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN