PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE VersaMax
- IC200ALG320F
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC200ALG320F 4-channel current output module
GE IC200ALG320F is a 4-channel current output module documented for VersaMax analog I/O. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete 4-channel current output module
ACTUAL APPLICATIONS
Application context for IC200ALG320F
Official manufacturer documentation supports these system uses when the complete VersaMax analog I/O configuration is verified.
-
01 · CEMENT & AGGREGATES
Parcel routing and pallet transfer lines for 4-channel current output module
Drive Coordination SystemsRotary kilns and clinker coolersRaw-mill conveyors and bagging lines -
02 · OIL & GAS
Quayside cranes and fuel systems for 4-channel current output module
Quality Inspection SystemsCompressor trains and metering skidsPipeline pumps and storage terminals -
03 · MINING & METALS
Bagging and bulk loading stations for 4-channel current output module
Process Control SystemsCrushers and grinding millsConveyors and flotation cells
Technical specifications for IC200ALG320F
-
Product ModelIC200ALG320F
-
Product Parameters4-channel current output module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Output Channels4
-
Output Range4 to 20 mA
-
Resolution12 bits
-
Update Rate0.3 ms maximum
-
Accuracy at 25 °C±0.3% typical
-
Supply Range18 to 30 V DC
-
Supply Current160 mA maximum
-
Backplane Current50 mA at 5 V DC
-
Status LEDsField power and module OK
View all additional
Alternative Names
IC200ALG320F
VersaMax analog I/O 4-channel current output module
GE 4-channel current output module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IC200ALG320F to the installed VersaMax analog I/O
GE IC200ALG320F is a 4-channel current output module for the VersaMax analog I/O. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare update rate (0.3 ms maximum), accuracy at 25 °c (±0.3% typical) and supply range (18 to 30 V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: IC200ALG320F
- Product class: 4-channel current output module
- Family: VersaMax analog I/O
The GE IC200ALG320F requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IC200ALG320F identity before exchange
Replace IC200ALG320F only after matching the complete article code, 4-channel current output module, installed VersaMax analog I/O role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: IC200ALG320F
- Product class: 4-channel current output module
- Family check: VersaMax analog I/O
The GE IC200ALG320F requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for IC200ALG320F
- GE VersaMax analog I/O references reviewed
- Exact GE identity required before service
Documentation for GE IC200ALG320F must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20 × 15 × 8 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC200ALG320F
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How do I identify the correct IC200ALG320F?
Confirm the complete IC200ALG320F nameplate, manufacturer, hardware revision and VersaMax analog I/O system context. -
What should be checked before replacing IC200ALG320F?
Compare the documented electrical ratings, signal or network interfaces, firmware and companion equipment for this 4-channel current output module. -
Can a similar VersaMax analog I/O article replace IC200ALG320F?
Only after the complete article code, channel or port configuration, ratings and engineering configuration are confirmed. -
What records should be saved before removal?
Photograph connectors and labels, then save the relevant program, parameters, addresses and diagnostic state. -
How should IC200ALG320F be inspected on receipt?
Check the exact label, housing, terminals, keyed connectors and signs of transport or storage damage. -
Which commissioning checks apply to IC200ALG320F?
Verify supply and wiring, restore the approved configuration, review diagnostics and perform a controlled functional test. -
What information is needed for a quotation?
Provide IC200ALG320F, quantity, clear nameplate photos and the installed VersaMax analog I/O configuration. -
What service evidence should be retained?
Keep the connection record, parameter backup, measurements, diagnostic results and final acceptance record.
READY TO VERIFY YOUR PART?
Get a IC200ALG320F quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
