Honeywell DCS

Mounting Carrier

A metal profile
A plastic cover plate
A ground rail with 16 ground connection screws
Two power rails with M5 holes (+24V and 0V)
Four mounting holes (6.35 mm diameter)
Operating temperature: -40 .. +70°C (-40 .. +158°F)
Storage temperature: -40 .. +85°C (-40 .. +185°F)
Relative humidity: 10..95% (non condensing)
Supply voltage: 24 V DC -15%..+30%
Supply rail current: max. 40 A
24V supply: 2 x M5

Redundancy Module

REDUNDANCY MODULE
PWA
0.75-1 AMP / 7-90 MA
3.3-24 VDC

DIGITAL INPUT MODULE

DIGITAL INPUT MODULE
LOGIC CARD
NON-REDUNDANT
IOTA
9 INCH

C300 Analog Input Module

C300 AI module MC-PHAI01
Supported control network : Only FTE(Currently, each C300 must be
connected to a control firewall)
Device index configuration : Between 1 and 510
IOTA size : 6 feet
Supports I/O links for several days : 2
Available input/output link speed :
375 Kbaud (PM INPUT/output only)
750 Kbaud (C Series input/output only)

Analog Input Module

Extensive self-diagnostics
Optional redundancy
Supplies non-incendive field power 
(No externaluser supplied power)
Suitable for Configure / Status for HART devices 
HART-capable, multivariable instruments 
for fastcollection of control variables
Fast loop scan
Non-Incendive Power

C300 System Backup Battery

51199942300
BACKUP BATTERY
REPLACEMENT FOR C300 SYSTEM
3.6 V
2200 MAH

8 channel Current Output Module

Part Number : 2MLF-DC8A
Analog Output Modules
2MLF-DC8A – 8 channel Current Output Module
2MLF -DC8A (Current Output Type) 
DC 4 ~ 20mA / DC 0 ~ 20mA

Analog Input Module

INPUT MODULE
ANALOG
DIFFERENTIAL./ SINGLE ENDED INPUT
16 CHANNEL
4-20 MA
0-5 VOLT
60 WATT
POWER & STATUS LED
HIGH LEVEL / G3

CONTROL PROCESSOR MODULE

8CPCNT02
CONTROL PROCESSOR MODULE
UNCOATED
DUAL LINK
24 VDC

C300 Controller Module

CCPCNT02
CONTROL PROCESSOR MODULE
C300
320 MA
24 VDC
(51454551-275)

Universal I/O Module

Electronic short circuit protection1
Fast Scan (Priority I/O Module Scan)
Safe-state (FAILOPT) behaviors configurable 
on aper channel basis for Digital / Analog Output
HART 7 support (Analog I/O)
HART Modem per Channel for Fast Performance
Extended Temperature Range -40 to +70°C 

Redundancy Module

REDUNDANCY MODULE
PWA
0.75-1 AMP / 7-90 MA
3.3-24 VDC

Optic Extender Module

FIBRE OPTIC EXTENDER
20 - 30 V DC @ 85 MA - 74 MA MAX
- 20C TO + 70C

51405098-100 SPACER BOARD

51405098100
SPACER BOARD
HART
ANALOG
0.46 AMP
24 VDC
REPLACED BY 51454493-126
LCNP4E GUS/EXPERION LCN INTERFACE. 
DELL MODEL T5500 AND NEWER REQUIRE 
THIS BOARD FOR LCN CONNECTION

Analog Output Module

8CTAOX61
PC BOARD
ANALOG OUTPUT IOTA
COATED
SERIES 8
16 CHANNELS

Analog Input Module

Extensive self-diagnostics
Optional redundancy
Open Wire Detection
Supplies non-incendive field power
Non-incendive Power

Analog Output Module

Extensive self-diagnostics
Optional redundancy
HART-capable for Status and Configuration
Safe-state (FAILOPT) behaviors configurable 
on aper channel basis
Non-incendive output

CONTROL INTERFACE MODULE

TCPCIC01
DISCONTINUED BY MANUFACTURER
CONTROL INTERFACE MODULE
CNET PCI
5.25 VDC @ 700 MA
CLASS 2
(96365671)

ANALOG INPUT MODULE

ANALOG INPUT MODULE
PC BOARD
LOGIC CARD
NON-REDUNDANT
IOTA
6 INCH

TPDG I/O BOARD

51304831100
TPDG I/O BOARD
INTERFACE FOR PERIPHERALS
6 PERIPHERAL CONNECTIONS

Analog Input Module

Extensive self-diagnostics
Optional redundancy
Supplies non-incendive field power
Fast loop scan

PLC I/O ADAPTER

51195096200
PLC I/O ADAPTER
EC

Redundant Net Interface Module

CONTROL LOGIX
REDUNDANT CONTROL NET INTERFACE MODULE
DUAL RED FW
24 VDC
CNI REDUNDANT MEDIA

Profibus DP gateway module

Integration: Acts as a DP Slave or Master
Data Transfer Rate: Up to 12 Mbps
Max Nodes: 125 nodes per segment
Voltage: 24 V DC (±10%)
Isolation: 500 V AC
Connector: 9-pin D-sub or terminal block 
Cable Length: Up to 1,200 meters 

5704F Fire Control Card

05704-A-0146
5704F Fire Control Card
4 Fire Zone Inputs
2 Switched DC Outputs
Single 3 Function Remote Input. 
Up to 16 Configurable Relay Outputs