PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TC-201-02-8M5 8.5-meter input cable for adjacent module slots
TC-201-02-8M5 is an 8.5-meter internal Companion Slot cable for Trusted analogue or digital input connections. The manufacturer describes adjacent module slots sharing a double-width chassis socket, with the field end connecting to the matching field termination assembly.
The -02 assembly uses low-smoke, zero-halogen cable construction. Two 96-way type C connectors occupy the chassis hood, while a single 96-way type R connector terminates at the field assembly. Input signals pass from the internal field termination assembly to the module.
The -02 assembly uses low-smoke, zero-halogen cable construction. Two 96-way type C connectors occupy the chassis hood, while a single 96-way type R connector terminates at the field assembly. Input signals pass from the internal field termination assembly to the module.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where TC-201-02-8M5 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · POWER GENERATION
Electricity Generation at Gas Fired and Combined Cycle Facilities
Gas fired generating stations supplying electricity for industrial consumers.Combined cycle generating facilities producing power for utility networks. -
02 · OIL & GAS
Petroleum Extraction, Gas Treatment and Hydrocarbon Processing Facilities
Offshore petroleum platforms handling extraction and initial production processing.Natural gas treatment plants and refineries processing hydrocarbon feedstocks. -
03 · CHEMICAL PROCESSING
Bulk Chemical Manufacturing and Specialty Product Production Areas
Continuous chemical manufacturing lines producing basic industrial chemical feedstocks.Batch blending facilities preparing formulated chemicals and specialty products.
Technical specifications for TC-201-02-8M5
-
Product ModelTC-201-02-8M5
-
Product ParametersInternal Input Companion Slot Cable
-
ManufacturerICS Triplex
-
Nominal cable length8.5 m; manufacturer xMx order-code convention
-
I/O arrangement40-channel input to internal FTA
-
Slot arrangementAdjacent Companion Slots; double-width chassis socket
-
Chassis connectorsTwo 96-way type C connectors; double-width hood
-
FTA connectorOne 96-way type R connector; single-width hood
-
Cable insulationLow smoke zero halogen; -02 variant
-
Flame-retardant referenceIEC 60332-3 Category A
-
Protective sheathingNylon Rilgain; finished ends resist fraying
-
Earth connectionsHood safety-earth braids and FTA-end screen drain
-
Catalog electrical limit60 V / 2 A maximum per channel; -02 variant
-
Recommended maximum length15 m for the I/O cable range; installation limits also apply
View all additional
Alternative Names
Trusted TC-201-02-8M5 Companion Slot cable
TC-201-02 8.5 meter input cable
ICS Triplex TC-201-02-8M5 internal FTA assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRUSTED EQUIPMENT
Match TC-201-02-8M5 to the documented Trusted configuration
TC-201-02-8M5 links a compatible Trusted input module arrangement to an internal FTA. The double-width chassis hood serves adjacent Companion Slots rather than a remote SmartSlot position.
Input signals pass from the internal field termination assembly to the module. Use the original module and termination assembly drawings to verify all endpoints.
The 8.5-meter -02 assembly has LSZH insulation and dedicated earth connections. Confirm the complete route, connector condition and field circuit against the documented cable limits.
Features:
- Adjacent Companion Slot arrangement
- Matching module and termination assembly
- Cable limits and field wiring checked
The ICS Triplex TC-201-02-8M5 internal input companion slot cable requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the complete TC-201-02-8M5 identity and 8.5-meter length. Match the input role, -02 insulation, double-width hood and the original field termination assembly.
Input signals pass from the internal field termination assembly to the module. Preserve the documented safety-earth braids and separate screen-earth connection.
Use the approved isolation plan and protect exposed contacts. Verify seating, field wiring and affected I/O under the complete manufacturer procedure before returning equipment to service.
Features:
- Match exact cable and slot layout
- Preserve field and earth connections
- Validate affected I/O after replacement
The ICS Triplex TC-201-02-8M5 internal input companion slot cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex TC-201-02-8M5 internal input companion slot cable must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544421100
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TC-201-02-8M5
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is TC-201-02-8M5 used for?
It is the 8.5-meter -02 internal Companion Slot assembly for a 40-channel input connection to an FTA. The exact module, termination assembly and approved wiring must match the manufacturer arrangement. -
How is the cable length specified?
The manufacturer uses xMx suffixes in half-meter increments. This complete order code identifies 8.5 meters; the 15-meter recommended range limit is a separate routing consideration. -
Is Companion Slot the same as SmartSlot?
No. Companion Slot cables use a double-width chassis socket for adjacent module slots. SmartSlot uses a different documented cable arrangement; similar connectors do not establish interchangeability. -
What does the -02 insulation suffix identify?
It specifies low-smoke, zero-halogen construction with an IEC 60332-3 Category A flame-retardant reference. Do not substitute the separate -03 designation or transfer its ratings to this cable. -
How are the field connections arranged?
Input signals pass from the internal field termination assembly to the module. Use the complete original drawing and module/FTA instructions; this summary does not provide a terminal pinout. -
Does the module voltage rating determine the cable rating?
No. The product catalog lists 60 V and 2 A maximum per channel for this -02 cable family. Check the entire module, FTA, cable and field circuit together; another listed module class does not override that cable limit. -
Can the cable be disconnected during hot replacement?
No general permission is given. Hot-swap module arrangements do not override the manufacturer live-circuit and hazardous-area warnings. Qualified personnel must follow the approved isolation and maintenance procedure.
READY TO VERIFY YOUR PART?
Get a TC-201-02-8M5 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
TC-201-02-8M5Internal Input Companion Slot CableManufacturer: ICS TriplexView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
