PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Protected DC distribution with selectable supply redundancy
ICS Triplex T8292C belongs to the Trusted miniature circuit breaker power distribution family. It provides protected DC branches for controller or expander chassis, downstream fused distribution and fan equipment. The installed link and feeder wiring determine the intended redundancy arrangement.
Four dual outputs serve chassis or downstream distribution units, and a lower-current dual output serves fans or other low-power equipment. Local LEDs indicate individual breaker trips, a volt-free relay reports a common alarm, and a link selects the redundancy arrangement.
Four dual outputs serve chassis or downstream distribution units, and a lower-current dual output serves fans or other low-power equipment. Local LEDs indicate individual breaker trips, a volt-free relay reports a common alarm, and a link selects the redundancy arrangement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T8292C Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · POWER GENERATION
Power Station Process Areas and Electricity Production Facilities
Thermal power stations with boilers and steam turbine auxiliaries.Electricity production facilities with fuel handling and cooling services. -
02 · CHEMICAL PROCESSING
Chemical Production Facilities and Industrial Feedstock Processing Areas
Chemical production facilities with reactors and bulk feedstock storage.Industrial feedstock processing areas with blending and transfer equipment. -
03 · OIL & GAS
Oil Refining Operations and Gas Production Processing Facilities
Oil refining operations with process heaters and storage facilities.Gas production facilities with separation equipment and compression trains.
Technical specifications for T8292C
-
Product ModelT8292C
-
Product ParametersTrusted MCB power distributor
-
ManufacturerICS Triplex
-
Breaker arrangementTwo five-channel sections with configurable feeder linking
-
Chassis distribution outputs4 dual 24 Vdc branches with 20 A MCB protection
-
Auxiliary output1 dual 24 Vdc branch with 3 A MCB protection
-
Maximum input current60 A; branch breaker values are not additive capacity
-
Common alarm contactVolt-free normally open contact, closed when healthy; open on trip
-
Status indication2 green feeder-health LEDs and 10 red breaker-trip LEDs
-
Alarm switching voltage60 Vdc or 125 Vac maximum; not the DC supply rating
-
Mounting arrangementTS32 or TS35 DIN rail; horizontal or vertical
-
Operating temperature0 to +60 degrees C
-
Non-operating temperature-25 to +70 degrees C
-
Relative humidity10-95%, noncondensing; operation, storage and transport
-
Equipment dimensions108 x 240 x 109 mm (H x W x D)
-
Equipment mass823 g; not packaged or shipping gross weight
View all additional
Alternative Names
T8292C Trusted MCB power distributor
ICS Triplex T8292C MCB protected DC power distribution
T8292C Trusted DIN rail chassis power distributor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRUSTED EQUIPMENT
Match T8292C to the documented Trusted configuration
T8292C distributes existing DC power through two breaker sections. Chassis, downstream fused distribution and fan loads require the correct branch and cable. The N+1 link and feeder allocation determine the redundancy; a dual terminal pair alone does not establish two independent feeds.
Resolve RM261 versus PC002G voltage limits for the supplied hardware. Match the approved N+1 or separated redundant feeder design.
Check DIN rail support, alarm wiring and access to breaker indicators.
Features:
- Two five-channel breaker sections
- Four dual 20 A branch outputs
- Dedicated dual 3 A auxiliary output
The ICS Triplex T8292C trusted mcb power distributor requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T8292C identity and compare its hardware revision with the installed item. Match T8292C and the actual revision, voltage applicability, link position, feeder allocation and load schedule. PC002G lists ordinary-location scope for this family. Do not infer hazardous-location suitability or an automatic redundant connection from the product name.
Resolve RM261 versus PC002G voltage limits for the supplied hardware. Check DIN rail support, alarm wiring and access to breaker indicators.
Use the controlled manufacturer procedure and the approved maintenance plan. A red indicator identifies an associated tripped breaker; the common alarm contact opens on trip. Investigate the circuit under the approved maintenance procedure rather than repeatedly resetting the breaker.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T8292C trusted mcb power distributor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T8292C trusted mcb power distributor must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109090
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T8292C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does T8292C distribute?
It distributes existing DC power through protected branches to Trusted chassis, a downstream fused distribution unit and fan or other low-power equipment. It does not convert mains power into a DC supply. -
Which supply voltage range applies?
PD-T8292 Issue 10 lists 22-28 Vdc; PC002G lists 18-28 Vdc. Confirm the rating for the supplied hardware revision. The broader range is not assigned here as an unconditional replacement specification. -
Are the two positive terminals of one branch independent feeds?
Not necessarily. The manual states that both positive supplies at TB1 use feeder 1, as does TB2; TB3 and TB4 use feeder 2. Separated redundant loads need the documented connection across the two feeder sections. -
How is the redundancy arrangement selected?
The N+1 link is factory fitted for N+1 operation. Separated redundant operation uses the documented link removal and feeder wiring. These are controlled configuration changes for qualified personnel, not an instruction to alter an operating installation. -
Can all branch breaker ratings be added together?
No. The unit has a 60 A maximum input rating. The four dual 20 A branches and dual 3 A auxiliary branch do not create a larger aggregate supply capacity; verify actual loading and upstream limits. -
What happens to the common alarm on a breaker trip?
The volt-free contact is closed in the healthy state and opens on a trip. Two green indicators report feeder health, while ten red indicators identify individual breaker trips. Check the complete alarm circuit and site response. -
Does the C suffix prove hazardous-area approval?
No. PC002G permits a C suffix for T8xxx catalogue numbers, but its T8292 entry lists ordinary-location scope. Confirm the actual product label and approved installation; do not infer certification or hardware issue from the suffix. -
Is the equipment mass a shipping weight?
No. The manual gives an 823 g equipment mass and 108 x 240 x 109 mm outline. Packaging and gross shipment weight require separate verification; the former unverified shipping values are not reused.
READY TO VERIFY YOUR PART?
Get a T8292C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
