Siemens SINAMICS

Trigger Driver Board

PC BOARD
SINAMICS PM240
Trigger Driver Board 

TRIGGER BOARD

260A TRIGGER BOARD 
DRIVER BOARD
480 V / 650 VDC / 260 A

Double Motor Module

SINAMICS S120 
Double Motor Module
input: 600 V DC 
output: 400V 3AC, 18 A/18 A 
design: booksize D type 
internal air cooling optimized pulse patterns 
and support of the extended Safety Integrated 
functions incl. DRIVE-CLiQ cable

Inverter driver board

SINAMICS S120/S150
Logic-side (control): 24 V DC
Power-side (IGBT control):up to 800 V DC peak
Signal Isolation: ≥2500 V AC
Operating: 0°C to +55°C
Storage: -40°C to +85°C

BRAKING RESISTOR

BRAKING RESISTOR
SINAMICS
160 OHM
4 KW
460 V
FOR POWER MODULE
FSB BASE MOUNTING POSSIBLE

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3-PH 400V, 9A 
FRAME SIZE: BOOKSIZE D-TYPE 
INTERNAL AIR COOLING OPTIMIZED PULSE 
SAMPLE AND SUPPORT OF THE EXTENDED 
SAFETY INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3AC 400V, 
30A FRAME SIZE: BOOKSIZE C-TYPE 
INTERNAL AIR COOLING OPTIMIZED 
PULSE SAMPLE AND SUPPORT OF
THE EXTENDED SAFETY INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

INVERTER CUVP BOARD

INVERTER CUVP BOARD
Logic Supply Voltage:24V DC ±10%
Multi-core DSP/Vector processor 
Temperature Range:0°C to +55°C 
EnDAT 2.2, Hiperface DSL¹, TTL/HTL²
SINAMICS S120 FW ≥ V4.8

Control Module

SINAMICS S 
spare part 
Pre-charging resistor 4R0
Resistance Value: 4Ω (4.0 Ohms)
Resistance:Ω (4.0 Ohms) ±10% tolerance
Power Rating:500 W to 1500 W 

Control Board

Input Power: 24V DC
Sensor Interfaces: Analog I/O (0-10V/4-20mA) 
ARM/X86-based chipsets
Temperature Range: -20°C to +60°C
Humidity Tolerance: ≤95% (non-condensing)

POWER SUPPLY UNIT

POWER SUPPLY UNIT
CIM PM-IF
SINAMICS spare part 
CIM PM-IF for Power Module 
PM 240 FSGX CIB,
power supply board and mounting plate

Capacitor board

SINAMICS S120 
Adapter cable 4-pole 
for connection of the connector X41 
for replacement of the CIB module 
with a Control Interface Module (CIM) 
is only required for air-cooled Power Modules

LINE REACTOR

SINAMICS LINE REACTOR 
FOR 10 KW SMART LINE MODULE 
INPUT: 3-PH 380-480 V
50/60 HZ

Power Block Drive Board

Power Block Drive Board
DC Link Voltage: 510–720 V DC
AC Output Voltage:400 V AC
Continuous Output: Up to 100–280 A (rms)
Cooling Method: Liquid or forced-air cooling
Thermal Resistance: < 0.05 K/W

TM120 TERMINAL MODULE

SINAMICS TERMINAL MODULE 
CABINET TM120 
WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD 
FOR SINAMICS CONVERTERS 
PTC and KTY analog inputs 
with safe electrical isolation

OUTPUT POWER UNIT

OUTPUT POWER UNIT
PEU ASSEMBLY
17.5 A
380-460 V AC
50/60 HZ

Single Motor Module

SINAMICS S120 
Single Motor Module 
input: 600 V DC 
output: 400 V 3 AC, 
9 A type of construction: booksize 
internal air cooling optimized pulse patterns 
and support of the extended Safety 
Integrated functions incl. DRIVE-CLiQ cable

BRAKING MODULE

SINAMICS BRAKING MODULE 
INPUT: 1035 V DC 
OUTPUT: 250 KW/15 S 
FOR CHASSIS UNITS 
HX AND JX

PC Adapter

SIMATIC S7
PC ADAPTER V5.1 
FOR CONNECTION OF S7-300/400
C7, M7; FOR CONVERSION OF RS232 TO RS485
W/O RS232 CABLE

INVERTER CONTROL MODULE

INVERTER CONTROL MODULE
MODEL IGD8
860 AMP
510-620 VDC

INTERFACE ADAPTER

INTERFACE ADAPTER
DOUBLE PTP1
PEER TO PEER
FOR 12 PULSE OPERATION
SIMOVERT MASTERDRIVES

MOTION CONTROL BOARD

CLOSED-LOOP AND CONTROL MODULE
MOTION CONTROL BOARD
CUMC
60 MHZ
SIMOVERT MASTERDRIVES

Control Interface Board

SINAMICS S 
replacement Control Interface Board 
for 380-480V 3AC
50/60 Hz
820A basic line module

IPI Parallel Switch Module

Parallel switch module IPI
Input Voltage:three-phase systems
Rated Voltage:380–480V AC (±10% tolerance)
Switching Capability: 5–6 inverters

SINAMICS S120 Smart Line Module

SINAMICS S120 
Smart Line Module 
380-480V 3AC, 50/60 Hz 
Output: 510-650 V DC, 550 A 
Rated power: 250kW 
Built-in unit IP00 Internal air cooling
Drive-CLiQ cable