Siemens SINAMICS

G120L Inverter Motherboard

Supply Voltage: 24 V DC (±20%)
Power Consumption: ≤15 W
Motor Compatibility: up to 55 kW
Standard Communication:PROFIBUS DP
Operating Temperature: -20°C to +60°C.
Relative Humidity: ≤95% (non-condensing)

Inverter Power Board

Voltage Range:380–480 V AC
Frequency: 50/60 Hz ±5%
Rated Current:20–200 A
Continuous Power: 10–150 kW
Operating Temperature: -10°C to +50°C (storage up to +70°C)

Frequency Converter Drive Board

PROFIBUS/MPI or PROFINET
Control Voltage: 24 V DC (±15%)
Output Switching Frequency: 1–16 kHz 
Isolation Voltage: ≥2.5 kV AC
Operational Temperature: 0°C to +50°C

Inverter control board

Control Voltage: +24 V DC
Switching Frequency: 5 kHz–15 kHz
Output Pulses: ≥8 PWM
Digital: Start/stop, fault reset
Analog: ±10 V 
Operating Temperature: –10°C to +50°C

Inverter control board

Inverter control board 
IGD9 for devices 510-620 V DC
1300 A
Logic Supply Voltage: +24 V DC (±10%)
DIP Switches:0–10 V, 4–20 mA
Operating Temperature: 0°C to +40°C 
Humidity: ≤95% (non-condensing)

INVERTER DRIVE TRIGGER BOARD

Control Voltage: 24 V DC (±10%)
Isolation Voltage: ≤2.5 kV AC 
Output Frequency: ≤20 kHz
Max Output Current: 3–5 A
Signal Logic: 0–24 V DC control signals
Operating Temperature: –10°C to +55°C
Storage Temperature: –40°C to +85°C
Relative Humidity: ≤93% (non-condensing)

Frequency converter trigger driver board

Logic Circuit: 24 V DC
Isolation Voltage: ≥2.5 kV AC
Output Current: Up to 2–3 A
Frequency Range: 1 kHz–20 kHz
Operating Temperature: 0°C to +60°C
Humidity: ≤95% (non-condensing)

TRIGGER CONTROL BOARD

DRIVER BOARD
TRIGGER CONTROL BOARD
SINAMICS PWB
1080 VDC
810-1025 AMP

OPERATOR PANEL

OPERATOR PANEL
PMU
PARAMETER ASSIGNMENT UNIT
FOR DESIGNS C / D
SIMOVERT MASTERDRIVES

FLAT RIBBON CABLE

FLAT RIBBON CABLE 
POWER INTERFACE 
POWER UNIT A7111-XF1

Normalizing module

Normalizing module 
ABO For devices 
DC 510-620V, 590A

Power supply module

PSU2 Power Board 
Power supply module 
Nominal Voltage: 400 VAC
Input Range: 380 VAC – 480 VAC 
Frequency: 45–65 Hz
Output Voltage: 24 VDC 
Output Current: Typically 10 A
Power Rating: 240 W

Thermal sensor

Thermal sensor
THERMAL DETECTOR
FOR ACQUISITION OF HEAT SINK TEMPERATURE
Operating Range: -25°C to +150°C
Accuracy:±1.5°C 
Response Time:<1 second
Operating Voltage: 24 VDC
Shock/Vibration Resistance: 5–100 Hz

Control Unit

CUA31 Control Unit 
Adapter for PM340/PM240-2 
Power Modules

Normalizing module

Normalizing module 
ABO For devices
3 AC 660-690V and 
DC 890-930V
171A

Inverter control module

SIMOVERT MASTERDRIVES 
Inverter control module 
IGD2 for devices 660-690 V AC 3
50/60 Hz and 890-930 V DC
60 A and 82 A

Normalizing module

Normalizing module 
ABO for devices 660-690 V 
3 AC and 890-930 V DC
82 A
Input Voltage (DC Link): 890–930 V DC
Rated Braking Current: 82 A continuous
Compatible AC Line Voltage Range: 660–690 V
Mains Connection Terminals: 3-phase AC supply

Inverter Board

Siemens MM440 Inverter
Voltage Range: 3-phase 380–480V AC (±10%)
Current Rating:up to 200A
Power Output: 0.37 kW to 250 kW
Switching Frequency: 2–16 kHz
Communication Interfaces: 0–10V, 4–20mA

PLC RELAY BOARD

SSB MODULE
PLC RELAY BOARD
Simovert Master Drives
K80 Option

DRIVE-CLIQ CABLE

SINAMICS DRIVE-CLIQ 
CABLE IP20/IP20 
LENGTH: 1.45 M

Allocation board

allocation board 
with functional safety A5E42928536
Supply Voltage: 24V DC (±15%)
Power Consumption: ≤5W 
Operating Current per Channel: 100 mA 
Isolation Voltage: 500V AC 
Operating Temperature: -20°C to +60°C
Relative Humidity: ≤95%

CompactFlash card

SINAMICS S120 
CompactFlash card 
with firmware option performance expansion 
including licensing (Certificate of License) V4.4

Communication components

A5E00242932
SIMATIC S7-300
PROFIBUS DP/MPI
PROFIBUS D-Sub 9-pin
Up to 12 Mbps for PROFIBUS

AC/DC DRIVE MODULE

AC/DC DRIVE
SIMOVERT MASTERDRIVES
890-930 V DC INPUT
660-690 V AC OUTPUT
3 PH
23 KW
1200 AMP
IP00

INTERFACE BOARD

INTERFACE BOARD
TERMINAL BLOCK SE300
FOR TECHNOLOGY MODULE T300
SIMOVERT MASTERDRIVES