PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- C98043-A1240-L21
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A1240-L21 Drive Control Circuit Board
Siemens C98043-A1240-L21 is identified in corroborating third-party spare listings as the A1 control circuit board for legacy SIMOVERT P 6SE11 drive equipment. It is a replacement board for a compatible installed drive configuration.
The board performs its role within the complete drive assembly, with compatibility determined by the full board identifier, connectors and installed drive execution. The companion identifier C98043-A1240 is retained as an alternative reference. Unverified standalone supply, current and switching ratings are not attributed to this board.
The board performs its role within the complete drive assembly, with compatibility determined by the full board identifier, connectors and installed drive execution. The companion identifier C98043-A1240 is retained as an alternative reference. Unverified standalone supply, current and switching ratings are not attributed to this board.
BEFORE YOU BUY
Confirm the complete drive control circuit board
ACTUAL APPLICATIONS
Application context for C98043-A1240-L21
C98043-A1240-L21 serves compatible legacy drive configurations in paper production, mineral processing and metal manufacturing. The installed SIMOVERT drive and board execution determine suitability. Connector allocation, hardware revision and the accepted drive configuration must match before the spare board is fitted.
-
01 · PULP & PAPER
Paper Processing and Pulp Manufacturing
Paper Production and ProcessingIndustrial Pulp Manufacturing Control -
02 · MINING
Mineral Processing and Mining Production
Mining Material Processing ControlMineral Production and Beneficiation -
03 · METALS
Industrial Metals and Steel Manufacturing
Industrial Steel Manufacturing ControlMetal Processing and Production
Technical specifications for C98043-A1240-L21
-
Product ModelC98043-A1240-L21
-
Spare ModelC98043-A1240
-
Product ParametersDrive Control Circuit Board
-
In stock4 units
-
ManufacturerSiemens
View all additional
Alternative Names
C98043-A1240-L21
C98043-A1240
SIMOVERT P A1 drive control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate C98043-A1240-L21 drive control circuit board
Identify the SIMOVERT P 6SE11 drive and installed A1 control board. Match C98043-A1240-L21 to the drive service record and existing connectors.
Compare the complete board execution and configured drive functions with the accepted system documentation. Retain the drive parameters and avoid transferring unsupported standalone electrical ratings to the board.
Use the applicable drive service and commissioning procedure. Verify the restored configuration and affected control paths at safe test conditions before acceptance.
Features:
- Exact article C98043-A1240-L21
- SIMOVERT P 6SE11 configuration
- Installed connector and revision compatibility
The C98043-A1240-L21 drive control circuit board requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify C98043-A1240-L21 drive control circuit board
Match C98043-A1240-L21 and the installed SIMOVERT drive execution before exchange. A partial C98043 reference alone does not establish interchangeability.
Archive the drive parameter record and connector positions. Record board markings and hardware revision, then isolate the drive using its applicable service procedure.
Restore the accepted drive configuration and test the affected functions. Confirm diagnostic status and safe controlled response before returning the drive to service.
Features:
- Exact article C98043-A1240-L21
- SIMOVERT P 6SE11 configuration
- Installed connector and revision compatibility
The C98043-A1240-L21 drive control circuit board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the C98043-A1240-L21 drive control circuit board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18.5 × 14.5 × 3.5cm
-
Shipping weight0.20kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A1240-L21
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What equipment family is identified for this control board?
Corroborating spare listings identify the A1 control board for legacy SIMOVERT P 6SE11 equipment. -
Is C98043-A1240-L21 a complete drive?
No. The identified item is a control circuit board used within a compatible drive assembly. -
Does the shorter C98043-A1240 identifier prove compatibility?
No. It is retained as an alternative reference; the full L21 execution and installed drive must still be matched. -
Are independent board supply ratings confirmed?
No reliable standalone electrical ratings have been confirmed for the exact L21 board. Use the installed-drive documentation and unit markings. -
Can the drive’s motor-current rating be treated as a board rating?
No. Complete-drive ratings do not establish an independent current rating for this control board. -
What configuration should be retained before replacement?
Preserve the accepted drive parameters, board markings and connector positions from the installed system. -
What identity evidence is required to quote the L21 spare?
Provide the full board identifier, SIMOVERT drive order code and clear photographs of the installed board markings and connectors. -
What should be compared on delivery of the control board?
Match C98043-A1240-L21, connector arrangement and visible hardware revision with the installed-board record and written quotation.
READY TO VERIFY YOUR PART?
Get a C98043-A1240-L21 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
