PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3353-6TG41-2CA3
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3353-6TG41-2CA3 SINAMICS chassis power module
Siemens 6SL3353-6TG41-2CA3 is a SINAMICS chassis power module in the SINAMICS S120 chassis drives. It is used to supply the specified operating power to the connected automation hardware.
Its documented configuration includes drive family of SINAMICS S120, power topology of Chassis power stage, input class of Three-phase industrial AC, and dc link of Common SINAMICS DC bus. During operation, the SINAMICS chassis power module converts and distributes the specified supply voltage to the connected hardware.
Its documented configuration includes drive family of SINAMICS S120, power topology of Chassis power stage, input class of Three-phase industrial AC, and dc link of Common SINAMICS DC bus. During operation, the SINAMICS chassis power module converts and distributes the specified supply voltage to the connected hardware.
BEFORE YOU BUY
Confirm the complete SINAMICS chassis power module
ACTUAL APPLICATIONS
Where 6SL3353-6TG41-2CA3 Fits Across Major Industry Sectors
Uses span paper, wood and mining, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Pulp Manufacturing and Commercial Packaging Paperboard Production
Pulp manufacturing and fiber preparation for commercial papermaking operations.Paperboard production and finishing for commercial packaging material supply. -
02 · WOOD PROCESSING
Commercial Sawmilling and Veneer and Plywood Manufacturing
Sawmilling and timber processing for construction and manufacturing markets.Veneer and plywood production for commercial wood product manufacturing. -
03 · MINING & MINERALS
Mineral Resource Extraction and Industrial Raw Material Processing
Mineral resource extraction for industrial production and material supply.Mineral processing and preparation for downstream industrial manufacturing operations.
Technical specifications for 6SL3353-6TG41-2CA3
-
Product Model6SL3353-6TG41-2CA3
-
Product ParametersSINAMICS chassis power module
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySINAMICS S120 chassis drives
-
Drive FamilySINAMICS S120
-
Power TopologyChassis power stage
-
Input ClassThree-phase industrial AC
-
DC LinkCommon SINAMICS DC bus
-
Control InterfaceDRIVE-CLiQ system
-
Motor ControlVector / servo control
-
RegenerationLine-module dependent
-
CoolingForced cabinet cooling
-
Protection ClassIP20 cabinet installation
-
Control Supply24 V DC
-
Commissioning ToolSTARTER / Startdrive
View all additional
Alternative Names
6SL3353 6TG41 2CA3
Siemens SINAMICS chassis power module
SINAMICS S120 chassis drives SINAMICS chassis power module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SL3353-6TG41-2CA3 to the installed SINAMICS S120 chassis drives
Siemens 6SL3353-6TG41-2CA3 is a SINAMICS chassis power module for the SINAMICS S120 chassis drives. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare drive family (SINAMICS S120), power topology (Chassis power stage) and input class (Three-phase industrial AC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6SL3353-6TG41-2CA3
- Product class: SINAMICS chassis power module
- Family: SINAMICS S120 chassis drives
The Siemens 6SL3353-6TG41-2CA3 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SL3353-6TG41-2CA3 identity before exchange
Replace 6SL3353-6TG41-2CA3 only after matching the complete article code, SINAMICS chassis power module, installed SINAMICS S120 chassis drives role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6SL3353-6TG41-2CA3
- Product class: SINAMICS chassis power module
- Family check: SINAMICS S120 chassis drives
The Siemens 6SL3353-6TG41-2CA3 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6SL3353-6TG41-2CA3
- Product family: SINAMICS S120 chassis drives
- Exact Siemens identity required before service
Documentation for Siemens 6SL3353-6TG41-2CA3 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size51 × 34 × 20 cm
-
Shipping weight18.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3353-6TG41-2CA3
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What should engineering compare before integrating 6SL3353-6TG41-2CA3 into the installed system?
Compare the documented SINAMICS S120 chassis drives role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6SL3353-6TG41-2CA3?
Inspect the 6SL3353-6TG41-2CA3 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SINAMICS S120 chassis drives family directly replace 6SL3353-6TG41-2CA3?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6SL3353-6TG41-2CA3?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6SL3353-6TG41-2CA3. -
Which configuration data should be backed up before exchanging 6SL3353-6TG41-2CA3?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6SL3353-6TG41-2CA3 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected SINAMICS chassis power module function at a safe operating point. -
What service evidence should be retained after work on 6SL3353-6TG41-2CA3?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6SL3353-6TG41-2CA3. -
Which nameplate details identify the correct 6SL3353-6TG41-2CA3 for a distributor quotation?
Quote 6SL3353-6TG41-2CA3 with the complete suffix, SINAMICS chassis power module, SINAMICS S120 chassis drives, quantity and clear nameplate photographs.
READY TO VERIFY YOUR PART?
Get a 6SL3353-6TG41-2CA3 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
