PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6DL1193-6TP00-0DN0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DL1193-6TP00-0DN0 SIMATIC ET 200SP HA terminal block
Siemens 6DL1193-6TP00-0DN0 is a SIMATIC ET 200SP HA terminal block designed for SIMATIC ET 200SP HA automation equipment. It provides the documented interfaces, electrical characteristics and installation format associated with this exact order number.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
BEFORE YOU BUY
Confirm the complete simatic et 200sp ha terminal block
ACTUAL APPLICATIONS
Application context for 6DL1193-6TP00-0DN0
6DL1193-6TP00-0DN0 supports industry applications that use the documented simatic et 200sp ha terminal block within SIMATIC ET 200SP HA. Its product type is Terminal block, and its system family is SIMATIC ET 200SP HA. These characteristics are used in industrial automation, utility process control and facility automation where the installed system and complete order code have been confirmed.
-
01 · PHARMACEUTICALS
Pharmaceutical, Biotechnology and Life Sciences Facilities
Pharmaceutical manufacturing and sterile life sciences facility infrastructureBiotechnology research and regulated healthcare product facility campuses -
02 · DISTRICT ENERGY
District Heating, Cooling and Utility Infrastructure
District heating and community energy sector facility infrastructureMunicipal cooling and shared utility infrastructure facility networks -
03 · PUBLIC UTILITIES
Municipal Utilities and Public Service Infrastructure
Municipal utility and public service sector facility infrastructureRegional water, energy and environmental service facility networks
Technical specifications for 6DL1193-6TP00-0DN0
-
Product Model6DL1193-6TP00-0DN0
-
Product ParametersSIMATIC ET 200SP HA terminal block
-
In stock9 units
-
ManufacturerSiemens
-
Product FamilySIMATIC ET 200SP HA
-
Terminal Block TypeN0
-
Terminal Technology64 push-in terminals
-
I&M DataSupported
-
Rated Voltage24 V DC
-
External Supply ProtectionRequired; 24 V DC / 10 A, characteristic B or C
-
Potential Group Current10 A max. up to 70 °C
-
Process Terminal Current2 A max.
-
Potential Group SupportYes
-
New Potential GroupYes
-
Potential Group from LeftNo
-
Number of Slots1
-
Backplane-to-Supply Isolation Test3,000 V DC for 1 minute
-
Potential Group Isolation Test1,500 V DC for 1 minute
-
Process-to-Supply Isolation Test1,500 V DC for 1 minute
View all additional
Alternative Names
6DL1193-6TP00-0DN0
SIMATIC ET 200SP HA SIMATIC ET 200SP HA terminal block
ET 200SP HA Terminal block product type
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DL1193-6TP00-0DN0 simatic et 200sp ha terminal block
6DL1193-6TP00-0DN0 is a SIMATIC ET 200SP HA terminal block in the SIMATIC ET 200SP HA family. Confirm the complete order code, installed position and documented product type of Terminal block before wiring or mechanical installation.
Integrate the unit according to its documented system family of SIMATIC ET 200SP HA. Match terminal allocation, supply, addressing and adjacent hardware to the accepted system drawing, and preserve the configured signal or drive relationships.
Commission 6DL1193-6TP00-0DN0 by checking the specified rated current of 10 A, status indications and diagnostics. Test every affected channel, communication path or controlled load, then record the final configuration and results.
Features:
- Product type: Terminal block
- System family: SIMATIC ET 200SP HA
- Rated current: 10 A
The 6DL1193-6TP00-0DN0 simatic et 200sp ha terminal block requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DL1193-6TP00-0DN0 simatic et 200sp ha terminal block
Select a replacement using the full 6DL1193-6TP00-0DN0 order code and the SIMATIC ET 200SP HA equipment definition. Verify the documented product type of Terminal block; a related family number does not establish interchangeability.
Before removal, photograph the label, terminals, connector orientation and adjacent module arrangement. Compare the system family of SIMATIC ET 200SP HA, retain the installed project settings and identify any separately ordered terminal or mounting accessories.
After fitting the verified replacement, restore the approved configuration and validate the rated current of 10 A. Check power-up diagnostics and all affected functions before returning the equipment to service.
Features:
- Terminal technology: Push-in terminals
- Module width: 45 mm
- Height: 175 mm
The 6DL1193-6TP00-0DN0 simatic et 200sp ha terminal block requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DL1193-6TP00-0DN0 simatic et 200sp ha terminal block must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.5 × 17.5 × 7.7 cm
-
Shipping weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DL1193-6TP00-0DN0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which ET 200SP HA connection is 6DL1193-6TP00-0DN0 designed for?
Siemens identifies 6DL1193-6TP00-0DN0 as a Type N0 terminal block with 64 push-in terminals. Verify the intended I/O module and terminal assignment in the station documentation. -
Does 6DL1193-6TP00-0DN0 begin a new potential group?
Yes. The 6DL1193-6TP00-0DN0 sheet states that it forms a new potential group rather than continuing power from the left. Confirm the station's power segmentation before wiring it. -
What protection belongs upstream of 6DL1193-6TP00-0DN0?
Siemens specifies external protection for the 6DL1193-6TP00-0DN0 24 V DC feed, such as a 10 A miniature circuit breaker with B or C characteristic. Match the installed protection design. -
How should a suspected terminal fault on 6DL1193-6TP00-0DN0 be checked?
Isolate the circuit, inspect push-in conductor engagement and compare each 6DL1193-6TP00-0DN0 connection with the 64-terminal schedule. Confirm supply and signal paths before replacing the block. -
What tests complete replacement of 6DL1193-6TP00-0DN0?
After fitting 6DL1193-6TP00-0DN0, verify the new potential group, 24 V supply and affected process terminals. Test connected I/O points and record the final station condition. -
Can a terminal block that bridges left replace 6DL1193-6TP00-0DN0?
No direct substitution should be inferred. The 6DL1193-6TP00-0DN0 creates a new potential group; compare Type N0 and the installed power-bus arrangement before ordering an alternative. -
What should be listed on a purchase request for 6DL1193-6TP00-0DN0?
State the exact 6DL1193-6TP00-0DN0 suffix, Type N0, quantity and the ET 200SP HA module it will support. Clarify any separately required wiring accessories. -
What must the receiving team inspect on 6DL1193-6TP00-0DN0?
Verify the 6DL1193-6TP00-0DN0 identification and check the push-in contacts and housing for shipping damage. Confirm that the supplied terminal block matches the quotation.
READY TO VERIFY YOUR PART?
Get a 6DL1193-6TP00-0DN0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
-
-
IC754VBI12CTDtwelve-inch QuickPanel View color operator interfaceManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
