PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6ES7132-6BF00-0CA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7132-6BF00-0CA0 8-Channel High-Feature Digital Output Module
Siemens 6ES7132-6BF00-0CA0 is a 8-channel high-feature digital output module in the SIMATIC ET 200SP range. It provides the documented function for a compatible industrial automation or building-control configuration.
The high-feature output module switches eight 24 V DC loads at up to 0.5 A per channel. It provides channel diagnostics, quality information and synchronous operation when used with a type A0 BaseUnit and a compatible ET 200SP interface.
The high-feature output module switches eight 24 V DC loads at up to 0.5 A per channel. It provides channel diagnostics, quality information and synchronous operation when used with a type A0 BaseUnit and a compatible ET 200SP interface.
BEFORE YOU BUY
Confirm the complete 8-channel high-feature digital output module
ACTUAL APPLICATIONS
Application context for 6ES7132-6BF00-0CA0
6ES7132-6BF00-0CA0 supports compatible SIMATIC ET 200SP installations across the selected application fields. Each use depends on the engineered configuration, interface allocation and documented operating limits.
-
01 · FOOD & BEVERAGE
Food Production and Beverage Manufacturing
Food Processing and Packaged ProductsBeverage Production -
02 · CHEMICAL & PETROCHEMICAL
Chemical and Petrochemical Manufacturing and Production
Industrial Chemical Batch ProductionPetrochemical Production and Processing -
03 · PHARMACEUTICAL
Pharmaceutical Production and Life Science Manufacturing
Pharmaceutical ProductionLife Science Manufacturing
Technical specifications for 6ES7132-6BF00-0CA0
-
Product Model6ES7132-6BF00-0CA0
-
Product Parameters8-Channel High-Feature Digital Output Module
-
In stock10 units
-
ManufacturerSiemens
-
Output channels8 P-switching outputs
-
Rated supply24 V DC
-
Permitted supply19.2–28.8 V DC
-
Rated output current0.5 A per channel
-
Maximum module current4 A
-
Typical power loss1 W
-
Address allocation1 output byte plus 1 quality-information byte
-
Short-circuit threshold0.7–1.3 A
-
Resistive switching rate100 Hz maximum
-
Channel diagnosticsWire break and short circuit
View all additional
Alternative Names
Siemens SIMATIC ET 200SP 8-Channel High-Feature Digital Output Module
6ES7132-6BF00-0CA0 8-Channel High-Feature Digital Output Module assembly
SIMATIC ET 200SP compatible 8-Channel High-Feature Digital Output Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7132-6BF00-0CA0 8-channel high-feature digital output module
Integrate 6ES7132-6BF00-0CA0 only in the documented SIMATIC ET 200SP arrangement. Match the supply, interface and connector allocation to the accepted engineering record.
The high-feature output module switches eight 24 V DC loads at up to 0.5 A per channel. It provides channel diagnostics, quality information and synchronous operation when used with a type A0 BaseUnit and a compatible ET 200SP interface.
Retain the controlled project, wiring record and diagnostic baseline for 6ES7132-6BF00-0CA0. Validate the assigned function after the surrounding SIMATIC ET 200SP configuration is restored.
Features:
- Match the documented SIMATIC ET 200SP interface
- Validate output channels and terminal allocation
- Retain the accepted project and diagnostics
The 6ES7132-6BF00-0CA0 8-channel high-feature digital output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7132-6BF00-0CA0 8-channel high-feature digital output module
Confirm the complete 6ES7132-6BF00-0CA0 article and SIMATIC ET 200SP execution before replacement. Compare every suffix, terminal arrangement and operating value.
Record the installed connections and configuration that determine the role of this 8-channel high-feature digital output module. Isolate the affected circuits before exchange.
After fitting 6ES7132-6BF00-0CA0, restore the verified configuration, clear applicable diagnostics and complete a functional acceptance test.
Features:
- Confirm the full 6ES7132-6BF00-0CA0 article
- Compare the installed connector arrangement
- Test the restored 8-channel high-feature digital output module function
The 6ES7132-6BF00-0CA0 8-channel high-feature digital output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before installation
- Match the manual scope to SIMATIC ET 200SP
- Retain the 6ES7132-6BF00-0CA0 commissioning record
Documentation for the 6ES7132-6BF00-0CA0 8-channel high-feature digital output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size1.5 × 7.3 × 5.8 cm
-
Net weight0.030 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7132-6BF00-0CA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does output channels affect selection of 6ES7132-6BF00-0CA0?
The documented output channels for 6ES7132-6BF00-0CA0 is 8 P-switching outputs. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
How does rated supply affect selection of 6ES7132-6BF00-0CA0?
The documented rated supply for 6ES7132-6BF00-0CA0 is 24 V DC. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
How does permitted supply affect selection of 6ES7132-6BF00-0CA0?
The documented permitted supply for 6ES7132-6BF00-0CA0 is 19.2–28.8 V DC. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
How does rated output current affect selection of 6ES7132-6BF00-0CA0?
The documented rated output current for 6ES7132-6BF00-0CA0 is 0.5 A per channel. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
How does maximum module current affect selection of 6ES7132-6BF00-0CA0?
The documented maximum module current for 6ES7132-6BF00-0CA0 is 4 A. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
How does typical power loss affect selection of 6ES7132-6BF00-0CA0?
The documented typical power loss for 6ES7132-6BF00-0CA0 is 1 W. Compare that value with the accepted SIMATIC ET 200SP configuration before ordering. -
What should be recorded before replacing 6ES7132-6BF00-0CA0?
Record the complete article marking, connector allocation, project settings and associated SIMATIC ET 200SP arrangement before removal. -
Which acceptance check is specific to 6ES7132-6BF00-0CA0?
After installation, restore the verified settings for 6ES7132-6BF00-0CA0, review diagnostics and test the affected function through its normal operating range.
READY TO VERIFY YOUR PART?
Get a 6ES7132-6BF00-0CA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
