PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-300
- 6AG1314-1AG14-7AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6AG1314-1AG14-7AB0 SIPLUS CPU 314 Central Processor
Siemens 6AG1314-1AG14-7AB0 is a SIPLUS S7-300 CPU 314 based on the 6ES7314-1AG14-0AB0 processor. It provides programmable machine and process control with an MPI interface, integrated 24 V DC supply and 128 KB of work memory.
The conformal-coated CPU is specified for −25 to 70 ℃ operation. A required SIMATIC Micro Memory Card holds the load memory and supports battery-free program and data retention. The processor executes the configured STEP 7 logic and communicates through MPI, while counters, timers and program blocks support the documented automation task.
The conformal-coated CPU is specified for −25 to 70 ℃ operation. A required SIMATIC Micro Memory Card holds the load memory and supports battery-free program and data retention. The processor executes the configured STEP 7 logic and communicates through MPI, while counters, timers and program blocks support the documented automation task.
BEFORE YOU BUY
Confirm the complete siplus cpu 314 central processor
ACTUAL APPLICATIONS
Application context for 6AG1314-1AG14-7AB0
6AG1314-1AG14-7AB0 supports S7-300 automation in manufacturing, water treatment and process production. Its coated construction and extended temperature range suit demanding environments. Suitability requires the supported I/O configuration, MPI network, MMC and approved control program.
-
01 · INDUSTRIAL MANUFACTURING
Manufacturing and Automated Production Control
Industrial Production Process ControlManufacturing Material Handling -
02 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Water Treatment Process AutomationWastewater Processing and Treatment -
03 · PROCESS INDUSTRIES
Industrial Process Production and Control
Chemical Process ProductionIndustrial Process Automation
Technical specifications for 6AG1314-1AG14-7AB0
-
Product Model6AG1314-1AG14-7AB0
-
Product ParametersSIPLUS CPU 314 Central Processor
-
In stock8 units
-
ManufacturerSiemens
-
Nominal DC supply24 V DC
-
Permitted supply voltage19.2–28.8 V DC
-
Rated supply current650 mA
-
Typical unloaded current140 mA
-
Typical inrush current3.5 A
-
Typical power loss4 W
-
Supply failure buffering5 ms; minimum repeat interval 1 s
-
Integrated work memory128 KB; not expandable
-
Maximum MMC load memory8 MB
-
MMC program-data retentionAt least 10 years after programming; battery-free
-
Typical instruction executionBit 0.06 μs; word 0.12 μs; fixed point 0.16 μs; floating point 0.59 μs
-
Maximum program block count1,024 DB / FB / FC combined; MMC-dependent
-
Maximum data-block size64 KB
-
S7 counter capacity256 counters; 0–999
-
Operating temperature−25–70 ℃; conformal coating
View all additional
Alternative Names
6AG1314-1AG14-7AB0
SIPLUS S7-300 CPU 314 MPI processor
Conformal-coated SIMATIC CPU 314
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6AG1314-1AG14-7AB0 siplus cpu 314 central processor
Configure the SIPLUS CPU 314 with the supported S7-300 modules and the required MMC. Use STEP 7 V5.5 SP1 or the documented earlier STEP 7 version with HSP 218.
Check the 19.2–28.8 V DC supply, 128 KB work-memory demand and MPI arrangement. The conformal-coated CPU rating does not automatically extend the environmental rating of every connected module.
Load the controlled program and hardware configuration through the approved engineering procedure. Validate communications, retentive data and each affected control function before accepting operation within the specified temperature limits.
Features:
- Nominal DC supply: 24 V DC
- Permitted supply voltage: 19.2–28.8 V DC
- Rated supply current: 650 mA
The 6AG1314-1AG14-7AB0 siplus cpu 314 central processor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6AG1314-1AG14-7AB0 siplus cpu 314 central processor
Match 6AG1314-1AG14-7AB0 and its SIPLUS coated execution before replacing the CPU. The underlying standard CPU number alone does not establish the required environmental suitability.
Archive the STEP 7 project, MPI address and MMC contents. Compare memory demand, block usage and startup behaviour with the verified replacement, including the existing retentive-data requirements.
Restore the accepted configuration and verify startup, communications and controlled process response. Retain the program backup and final configuration record after successful functional testing.
Features:
- Nominal DC supply: 24 V DC
- Permitted supply voltage: 19.2–28.8 V DC
- Rated supply current: 650 mA
The 6AG1314-1AG14-7AB0 siplus cpu 314 central processor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6AG1314-1AG14-7AB0 siplus cpu 314 central processor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4 × 12.5 × 13cm
-
Shipping weight0.28kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6AG1314-1AG14-7AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which standard CPU underlies this coated SIPLUS version?
The official description identifies 6ES7314-1AG14-0AB0 as the base CPU. The supplied article remains 6AG1314-1AG14-7AB0 with SIPLUS conformal coating. -
Does the integrated 128 KB work memory expand with a larger MMC?
No. The integrated work memory is 128 KB and is not expandable. The MMC provides separate load memory, with a documented maximum of 8 MB. -
What engineering versions are listed for the SIPLUS CPU 314?
The datasheet lists STEP 7 V5.5 SP1 or later, or STEP 7 V5.2 SP1 or later with HSP 218. Confirm project and engineering compatibility. -
How is program retention maintained without a battery?
The required MMC provides maintenance-free program and data backup. Siemens specifies at least ten years of MMC data retention after programming. -
What execution time is specified for floating-point arithmetic?
The typical floating-point operation time is 0.59 μs; bit operations are 0.06 μs. Complete cycle time also depends on the configured program and I/O. -
Does the CPU temperature range apply to the entire S7-300 station?
The SIPLUS CPU is rated −25 to 70 ℃. Other station components must individually meet the actual environmental requirements. -
What should a replacement CPU 314 quotation identify?
Specify 6AG1314-1AG14-7AB0, the required coated execution, existing MPI arrangement and project version. State whether an MMC is included in the requested supply. -
How should the received SIPLUS processor be matched to the order?
Verify the complete 6AG article label and CPU 314 designation, inspect the module and connector condition, and compare the MMC and accessory scope with the quotation.
READY TO VERIFY YOUR PART?
Get a 6AG1314-1AG14-7AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
