PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- Simatic DP
- 6ES7134-4GB00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7134-4GB00-0AB0 two-channel current input
Siemens 6ES7134-4GB00-0AB0 is a two-channel current input for the SIMATIC ET 200S distributed I/O. It is used to current, 4-wire. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete two-channel current input
ACTUAL APPLICATIONS
Where 6ES7134-4GB00-0AB0 operates in industrial systems
Siemens official documentation supports these system applications when the module is correctly configured and integrated.
-
01 · FOOD & BEVERAGE
Liquid Processing and Packaging Measurement Stations
Production measurement systemsMixing tank level and flow transmittersFilling line pressure and temperature sensors -
02 · WATER & WASTEWATER
Pumping and Filtration Measurement Control Panels
Treatment measurement systemsFilter differential-pressure transmittersDistribution flow and reservoir level sensors -
03 · CHEMICAL & PETROCHEMICAL
Reactor and Transfer Process Measurement Areas
Plant measurement systemsReactor temperature and feed flow transmittersStorage tank level and transfer pressure sensors
Technical specifications for 6ES7134-4GB00-0AB0
-
Product Model6ES7134-4GB00-0AB0
-
Product Parameterstwo-channel current input
-
In stock1 unit
-
ManufacturerSiemens
-
Input Channels2 analog channels
-
Input TypeCurrent, 4-wire
-
Signal Range4 to 20 mA
-
Rated Supply24 V DC from power module
-
No-load Current80 mA maximum
-
Backplane Current10 mA at 3.3 V
-
Power Loss0.6 W typical
-
Address Space4 bytes maximum
-
Resolution13 bit class
-
Channel IsolationChannels to backplane bus
-
Wire-break DiagnosticsAvailable for 4 to 20 mA
-
Conversion PrincipleIntegrating analog conversion
-
Module FamilyET 200S electronic module
-
Terminal Width15 mm ET 200S format
View all additional
Alternative Names
6ES7134 4GB00 0AB0
SIMATIC ET 200S distributed I/O two-channel current input
Siemens two-channel current input
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7134-4GB00-0AB0 to the installed SIMATIC ET 200S distributed I/O
Siemens 6ES7134-4GB00-0AB0 is a two-channel current input used in the SIMATIC ET 200S distributed I/O. Use 6ES7134-4GB00-0AB0 as the two-channel current input in the SIMATIC ET 200S distributed I/O. Confirm input type Current, 4-wire and the exact installed arrangement before connection.
Record the product label, address space (4 bytes maximum), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm 24 v dc from power module, 80 ma maximum, the exact mechanical position and the approved system configuration before connection.
After installation, verify module family (ET 200S electronic module), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6ES7134-4GB00-0AB0
- Product class: two-channel current input
- Family: SIMATIC ET 200S distributed I/O
The Siemens 6ES7134-4GB00-0AB0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7134-4GB00-0AB0 identity before exchange
Replace 6ES7134-4GB00-0AB0 only after matching the full article identity, two-channel current input, installed 0.6 w typical and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, 13 bit class, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete 15 mm et 200s format. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6ES7134-4GB00-0AB0
- Connection: 13 bit class
- Test: 15 mm ET 200S format
The Siemens 6ES7134-4GB00-0AB0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6ES7134-4GB00-0AB0
- Installation checks matched to SIMATIC ET 200S distributed I/O
- Exact Siemens identity required before service
Documentation for Siemens 6ES7134-4GB00-0AB0 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7134-4GB00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which input type must engineering verify for 6ES7134-4GB00-0AB0?
For 6ES7134-4GB00-0AB0, verify the documented input type is Current, 4-wire and confirm the remaining nameplate limits before connection. -
How should maintenance document the address space before removing 6ES7134-4GB00-0AB0?
Photograph the address space, which is 4 bytes maximum, plus terminal labels, cable routing, shields and adjacent hardware for 6ES7134-4GB00-0AB0. -
What does the input channels value mean when sourcing 6ES7134-4GB00-0AB0?
The exact documented value for 6ES7134-4GB00-0AB0 is 2 analog channels; use it with the full article code when checking the supplied configuration. -
Which rated supply limit applies during commissioning of 6ES7134-4GB00-0AB0?
Apply 24 V DC from power module for rated supply on 6ES7134-4GB00-0AB0; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote 6ES7134-4GB00-0AB0 from a shortened code?
No. Quote the complete identity 6ES7134-4GB00-0AB0, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the two-channel current input 6ES7134-4GB00-0AB0?
Inspect 6ES7134-4GB00-0AB0 for the full label, connector condition, revision markings, shipping damage and consistency with SIMATIC ET 200S distributed I/O. -
Which system record should be retained after replacing 6ES7134-4GB00-0AB0?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for 6ES7134-4GB00-0AB0. -
How is the restored two-channel current input function tested for 6ES7134-4GB00-0AB0?
Check status indications, diagnostics and the affected two-channel current input response, then record the final result against 6ES7134-4GB00-0AB0.
READY TO VERIFY YOUR PART?
Get a 6ES7134-4GB00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
