PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- Simatic DP
- 6ES7972-0BA12-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7972-0BA12-0XA0 Vertical PROFIBUS Screw Connector
Siemens 6ES7972-0BA12-0XA0 is a vertical profibus screw connector in the SIMATIC DP PROFIBUS RS485 range. It supports the documented automation configuration in industrial equipment.
This 90-degree connector joins the PROFIBUS cable to a compatible station through a 9-pin D-sub interface. Screw terminals secure the bus cable cores. The supplied execution has no programming-device socket. Its switchable terminating resistor must be selected only at the appropriate segment end.
This 90-degree connector joins the PROFIBUS cable to a compatible station through a 9-pin D-sub interface. Screw terminals secure the bus cable cores. The supplied execution has no programming-device socket. Its switchable terminating resistor must be selected only at the appropriate segment end.
BEFORE YOU BUY
Confirm the complete vertical profibus screw connector
ACTUAL APPLICATIONS
Application context for 6ES7972-0BA12-0XA0
6ES7972-0BA12-0XA0 is a vertical profibus screw connector for DP PROFIBUS RS485. Its use in compatible automation systems covers industrial manufacturing, automotive, food and beverage. The connected equipment and electrical ratings determine suitability.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Automated Product Assembly
Industrial Component ManufacturingAutomated Assembly Production -
02 · AUTOMOTIVE
Automotive Manufacturing and Vehicle Component Production
Vehicle Component ManufacturingAutomotive Assembly Production -
03 · FOOD & BEVERAGE
Food Processing and Beverage Production Industries
Food Processing and PackagingBeverage Production and Bottling
Technical specifications for 6ES7972-0BA12-0XA0
-
Product Model6ES7972-0BA12-0XA0
-
Product ParametersVertical PROFIBUS Screw Connector
-
In stock10 units
-
ManufacturerSiemens
-
PROFIBUS data rate9.6 kbit/s–12 Mbit/s
-
Bus cable connection count2
-
Equipment connection count1
-
Cable terminationScrew terminals
-
Station connector9-pin D-sub male
-
Terminating networkIntegrated resistor combination, slide-switch selectable
-
Cable outlet angle90°
-
Enclosure materialPlastic
-
Locking constructionScrewed joint
-
Operating temperature−25–60 ℃
-
Storage and transport temperature−40–70 ℃
-
Ingress protectionIP20
-
Programming-device socketNot provided
-
Cable strain reliefProvided
-
Silicone contentSilicone-free
View all additional
Alternative Names
6ES7972-0BA12-0XA0
SIMATIC DP PROFIBUS RS485
Vertical PROFIBUS Screw Connector for DP PROFIBUS RS485
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7972-0BA12-0XA0 vertical profibus screw connector
Match 6ES7972-0BA12-0XA0 to the accepted SIMATIC DP PROFIBUS RS485 configuration and associated parts before integration.
This 90-degree connector joins the PROFIBUS cable to a compatible station through a 9-pin D-sub interface. Screw terminals secure the bus cable cores. The supplied execution has no programming-device socket. Its switchable terminating resistor must be selected only at the appropriate segment end.
Follow the applicable manufacturer instructions for 6ES7972-0BA12-0XA0. Compare connection assignments, retain the accepted wiring record and test the affected signals before returning the equipment to service.
Features:
- PROFIBUS data rate: 9.6 kbit/s–12 Mbit/s
- Bus cable connection count: 2
- Equipment connection count: 1
The 6ES7972-0BA12-0XA0 vertical profibus screw connector requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7972-0BA12-0XA0 vertical profibus screw connector
Confirm the complete 6ES7972-0BA12-0XA0 identity and SIMATIC DP PROFIBUS RS485 execution before replacement. Match the documented connection and electrical ratings.
Record the existing vertical profibus screw connector connections, companion modules and configuration. Isolate the affected circuits according to the site procedure before removing the installed part.
After fitting 6ES7972-0BA12-0XA0, restore the accepted arrangement and test the affected signals. Retain the component identity and final functional test results with the equipment record.
Features:
- PROFIBUS data rate: 9.6 kbit/s–12 Mbit/s
- Bus cable connection count: 2
- Equipment connection count: 1
The 6ES7972-0BA12-0XA0 vertical profibus screw connector requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7972-0BA12-0XA0 vertical profibus screw connector must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.3 × 4 × 1.5cm
-
Shipping weight0.02kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536909000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7972-0BA12-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What baud-rate interval is listed for the vertical BA12 screw plug?
6ES7972-0BA12-0XA0: profibus data rate is 9.6 kbit/s–12 Mbit/s. Apply the documented limits of this execution. -
How many bus cables enter the BA12 connector?
6ES7972-0BA12-0XA0: bus cable connection count is 2. Apply the documented limits of this execution. -
What equipment connection count applies to BA12?
6ES7972-0BA12-0XA0: equipment connection count is 1. Apply the documented limits of this execution. -
Which terminal method is used for BA12 cable cores?
6ES7972-0BA12-0XA0: cable termination is Screw terminals. Apply the documented limits of this execution. -
What station-side connector is fitted to BA12?
6ES7972-0BA12-0XA0: station connector is 9-pin D-sub male. Apply the documented limits of this execution. -
How does BA12 select its integrated resistor network?
6ES7972-0BA12-0XA0: terminating network is Integrated resistor combination, slide-switch selectable. Apply the documented limits of this execution. -
What distinguishes the vertical screw connector in a spare-part request?
For 6ES7972-0BA12-0XA0, provide the complete article and quantity, the installed SIMATIC DP PROFIBUS RS485 identity and a connector photograph. Verify profibus data rate (9.6 kbit/s–12 Mbit/s) and bus cable connection count (2) against the requested execution. -
Which arrival checks identify the vertical profibus screw connector 6ES7972-0BA12-0XA0?
Compare the complete 6ES7972-0BA12-0XA0 label with the ordered SIMATIC DP PROFIBUS RS485 execution. Inspect the connectors and enclosure and verify the listed accessories before replacement.
READY TO VERIFY YOUR PART?
Get a 6ES7972-0BA12-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
