Yokogawa Centum XL

Multi Status Input Card

Input Channels: Typically 16 channels
Input Signal Type: Dry contact 
Low Voltage (TTL): 5–24 V DC
High Voltage: Up to 48 V DC 
Input Current: ≤ 5 mA per channel

Pulse Input Module

Number of inputchannels:8, isolated channels 
Input frequency :0 to 10 kHz
Minimum input pulse width:40 µs 
Pull-up resistance:68 kΩ (12 V DC or 24 V DC)
Filter:Filter for eliminating chattering can be set
Data update period:2 ms 

CPU module

Memory Main:256 MB with ECC
Static RAM:2 MB with ECC, backed up by battery
1 GB on-boad flash memory
2 Ethernet ports : RJ45 modular jacks
SB bus (duplex)
Supply voltage:5 V DC ±5 %
Current consumption:Max.1200 mA

V-NET Coupler Module

Input Voltage: 24 V DC
Power Consumption: Estimated 10–15 W
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Humidity: 5–95% RH (non-condensing)

Vnet/IP COMMUNICATION MODULE

Power Supply:24 V DC
Power Consumption:≤5 W
Operating Temp.:-20°C to +70°C
Humidity:10–90% RH (non-condensing)

POWER SUPPLY MODULE

PW44150
POWER SUPPLY MODULE
FOR V NET POWER
1.4AMP
100-120VAC
50/60HZ

Coupler Module

Impedance: 100 Ω ±15%
Power Supply Input: 24V DC (±10%) 
Power Consumption: ≤5W
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Humidity: 5–95% non-condensing

POWER SUPPLY MODULE

PW44150
POWER SUPPLY MODULE
FOR V NET POWER
1.4AMP
100-120VAC
50/60HZ

Power Supply Module

Input Voltage:100–120 V AC
Input Frequency: 50/60 Hz 
Maximum Power Consumption: 200 VA
Output Voltage: Typically 24 V DC
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Storage Temperature: -25°C to +70°C (-13°F to 158°F).
Humidity: 5–95% RH (non-condensing)

TERMINAL BLOCK

PRESSURE CLAMP TERMINAL BLOCK
STARDOM
BASIC TYPE
FOR CONNECTION USE WITH ANALOG
12 CHANNEL MODULE

TERMINAL BLOCK

PRESSURE CLAMP TERMINAL BLOCK
STARDOM
BASIC TYPE
FOR CONNECTION USE WITH ANALOG
12 CHANNEL MODULE

19 INCH RACK

Max number of mountable I/O modules:8 
Number of mountable Power suply modules:2 
S Standard type
0 19-inch rack-mounted
BASE MODULE
STYLE S1
STANDARD TYPE
19 INCH RACK
DIN MOUNT
(92F306027)

Serial Communication Module

Interface:RS-422/RS-485 (2 ports)
How connected:Multipoint
How communicates Half-duplex/Full-duplex
How synchronizes Start-stop synchronization
Transmission code ASCII/binary
Character length:7/8 bits
Stop bit :1/2 bits
Parity check None/even/odd
Transmission distance Maximum:1200 m
Current consumption:500 mA

RTD Input Module

Number of input channels:12, isolated
Allowable input voltage:±5 V
Between input and system: 1500 V AC for 1minute
Power ON :2 MΩ or more
Power OFF: 2 MΩ or more
Allowable total resistance of signalsource plus wiring:40 Ω or less 
Effect of allowable signal source resistance (1000 Ω): ±20 μV
Measurement current:1 mA
Temperature drift:Max. ±30 ppm/°C 
Maximum current consumption:450 mA (5 V DC)

RTD Input Module

Allowable input voltage ±5 V.
Withstanding voltage :1500 V AC for 1minute 
Power ON 2 MΩ or more
Power OFF 2 MΩ or more
Accuracy ±0.03% of full scale (for 0 to 400 Ω)
Allowable total resistance of signalsource plus wiring:40 Ω or less 
(wiring resistance per wire)
Temperature drift:Max. ±30 ppm/°C.
Maximum current consumption:450 mA (5 V DC)

Digital Input Module

Number of input channels:32
Rated input voltage:24 V DC
Input ON voltage:18 to 26.4 V DC
Input OFF voltage:5.0 V DC or less
Input current (at rated input voltage):4.1 mA±20 % / channel
Instantaneous allowable maximum input voltage:30.0 V DC
Input response time:8 ms or less
Minimum ON detection time:20 ms 
Maximum ON/OFF cycle:25 Hz
Maximum current consumption:500 mA (5 V DC)

Digital output module

Number of output channels:64
Rated applied voltage:24 V DC
Load voltage:24 V DC, 100 mA
Field power supply voltagerange:20.4 to 26.4 V
Output ON voltage maximumvalue:2 V DC
Leak current maximum valuewhen output OFF:0.1 mA
Output format:Current sink

Analog input module

Number of input:channels16, non-isolated
Input signal:4 to 20 mA
Allowable input current/voltage:27 mA
Accuracy:±0.1% of full scale
Data refresh cycle:10 ms
Input step response time:100 ms
Transmitter power supply:22.8 to 26.4 V 
Setting of 2-wire or 4-wiretransmitter 
For each channel by setting pin

Power supply module

Power supply module 
(220-240 V AC input)
Standard type with no explosionprotection
Basic type
With ISA Standard G3 option

Serial Communication Module

Interface:RS-422/RS-485 (2 ports)
How connected:Multipoint
How communicates Half-duplex/Full-duplex
How synchronizes Start-stop synchronization
Transmission code ASCII/binary
Character length:7/8 bits
Stop bit :1/2 bits
Parity check None/even/odd
Transmission distance Maximum:1200 m
Current consumption:500 mA

Digital Input Module

Number of input channels:32
Rated input voltage:24 V DC
Input ON voltage:18 to 26.4 V DC
Input OFF voltage:5.0 V DC or less
Input current (at rated input voltage):4.1 mA±20 % / channel
Instantaneous allowable maximum input voltage:30.0 V DC
Input response time:8 ms or less
Minimum ON detection time:20 ms 
Maximum ON/OFF cycle:25 Hz
Maximum current consumption:500 mA (5 V DC)

Pulse Input Module

Number of input channels:8, isolated channels
Input frequency:0 to 10 kHz
Minimum input pulse width:40 μs
Shunt resistance Select from:OFF/200/500/1000 Ω
Pull-up resistance:68 kΩ (12 V DC or 24 V DC
Data refresh cycle:2 ms
Filter function Can select a filter that eliminates chattering 
Transmitter power supply 
Can select:24 V DC/12 V DC.

Digital Output Module

Number of output channels:64
Rated applied voltage:24 V DC
Load voltage:24 V DC, 100 mA
Field power supply voltagerange:20.4 to 26.4 V
Output ON voltage maximumvalue:2 V DC
Leak current maximum valuewhen output OFF:0.1 mA
Output format:Current sink

Current/Voltage Input Module

Number of input:channels16, non-isolated
Input signal:4 to 20 mA
Allowable input current/voltage:27 mA
Accuracy:±0.1% of full scale
Data refresh cycle:10 ms
Input step response time:100 ms
Transmitter power supply:22.8 to 26.4 V 
Setting of 2-wire or 4-wiretransmitter 
For each channel by setting pin

RTD Input Module

Allowable input voltage ±5 V.
Withstanding voltage :1500 V AC for 1minute 
Power ON 2 MΩ or more
Power OFF 2 MΩ or more
Accuracy ±0.03% of full scale (for 0 to 400 Ω)
Allowable total resistance of signalsource plus wiring:40 Ω or less 
(wiring resistance per wire)
Temperature drift:Max. ±30 ppm/°C.
Maximum current consumption:450 mA (5 V DC)