ABB Advant OCS and Advant-800xA

PANEL INTERFACE

64532588
Interface  Board
ADPI-01 PANEL INTERFACE
Power Supply:24V DC
Consumption: 15W (typical)
Operating Voltage:18–30V DC (±10%)
Isolation :500V AC between ports and power

Control board

Processor:Dual-core CPU
Memory:512 MB RAM
Flash Storage:1 GB internal
Power Supply:24 V DC
Communication Ports
2x Ethernet (RJ45): 10/100/1000 Mbps 
1x Serial (RS-232/485): For legacy devices (MODBUS RTU).
1x USB 2.0: For engineering access.

POWER SUPPLY BOARD

POWER SUPPLY BOARD
WITH JUMPER WIRE
Primary Input: 18–32 V DC
Backup Input: 24 V DC 
Output Voltage: 24 V DC
Output Current: 6 A
Holdup Time: ≥48 hours 
Efficiency: >85% (typical).
Ripple & Noise: <100 mV peak-to-peak

PLC BOARD

Power Supply:24V DC (±10%)
Power Consumption:≤ 5W
Isolation:1500V AC 
 Digital: 16–32 channels
Analog: 4–8 ch

USB-Hardlock Key for ECT

USB-Hardlock Key for ECT with 1 licence
Encryption:AES-128/256-bit
Hardware ID:Unique 64-bit serial number 
Operating Voltage:5V DC
Power Consumption:≤ 100 mA

PCB Board

Fiber Optic Ports: 6–12 channels
Power supply pins:+24V DC, +5V DC
Operating Voltage: 24V DC
Power Consumption: ≤ 15W
Reinforced isolation:2.5kV

Drive Digital Processor Module

Power Supply Voltage:24 VDC 
Power Consumption:< 5 Watts
Operating Temperature:-10°C to +55°C (14°F to 131°F)
Storage Temperature:-40°C to +70°C (-40°F to 158°F)
Humidity:5% to 95% non-condensing

Compact module

Compact installation of I/O modules 
Up to 16 channels of field signals 
and process power connections
Connections to ModuleBus and I/O modules
Mechanical keying prevents 
insertion of the wrong I/O module
Latching device to DIN rail for grounding
DIN rail mounting

IGCT Module

Voltage Class:6.5kV AC/DC
Continuous Anode Current:5,150 A RMS
Surge Current (10ms pulse):45 kA peak 
Switching Speed:Turn-off <4.5 μs
Gate Drive:-18V ~ +22V w/±200A
Storage temp. Limit:-40℃ to +100℃ 

Starter kit

CPU:16-bit Renesas RX630 MCU
Memory:256KB RAM
Communication:2 × Ethernet (10/100BASE-T)
I/O Simulation:Virtual D/I and D/O
Power Supply:24V DC
6 × D/O (Transistor Sink: 0.5A @ 24V DC
Power cables :24V DC

INVERTER BOARD

3BHE024855R0101
DISCONTINUED BY MANUFACTURER
INVERTER BOARD
UFC921 A101

IGCT controller module

Reverse Voltage:4500V+
Forward Current:250–5000A
Switching Speed:<100 μC
Trigger Voltage/Current:+15/-15V pulses
Turn-On/Off Time:300–500 ns

Fieldbus Communication Interface

CI810B AF100 Fieldbus Communication Interface
2*AF100 Twisted Pair Modems.
Including:
1 pce Power Supply Connector 3BSC840098R1
1 pce TB807 Modulebus Terminator 3BSE008538R1
2 pcs Terminal Blocks 3BSC840098R1
The basic system software version 1.5 loaded.
AF100 Connector 3BSC840105R1

Processor module

AC500-eCo Processor module
Memory 4MB
12 DI 24 VDC. 6 DO-Relay
2 DC 24 VDC
Ethernet interface
3 option slots

Controller Module

Clock Speed: 800 MHz – 1.5 GHz 
RAM: 2 GB DDR4
Operating Voltage: 24 V DC
Power Consumption: ≤18 W
Isolation: ≥3000 V AC
Ethernet Interfaces:2× Gigabit ports
Discrete I/O: 12–24 V DC
Analog Interfaces: 4–8 channels

Motherboard

Input Voltage: 24 V DC
Backplane Power: 5 V DC
RAM Slots: 2× DDR4 SO-DIMM 
Storage: Integrated 16 GB flash
Operating: -40°C to +70°C
Humidity: 5–95% non-condensing
MTBF: >250,000 hours 

Processor Module

Operating Voltage: 24 V DC
Power Consumption: <12 W
Input Protection:±40 V peak transient
Digital I/O: 16 channels
Analog I/O (Optional): 4 channels 
Ethernet: 2× 10/100 Mbps ports
Serial: RS-232/RS-485 for legacy devices
Fieldbus: PROFIBUS DP

High Voltage Inverter Board

Control Board

Operating Voltage: 24 V DC
Power Consumption: ≤15 W
Voltage Range: 0–10 V DC
Resolution: 12-bit
Channels: ≥8 opto-isolated
Input Signal Level: 24 V DC

Analog input module

Function:4 AI: U, I
Number of Analog Configurable I/Os:0
Analog Inputs:4
Input Signal:U, I
Resolution:Analog Input 12 bit
Connection Type:Pluggable
Degree of Protection:Housing IP20
Ambient Air Temperature:
Operation 0 ... +60 °C
Storage -40 ... +70 °C

Interface board

Power Supply: 24 VDC (±10%) or 110–240 VAC
1–2 x RJ45 Ethernet ports.
Serial ports (RS-232/485) for legacy devices
Fiber-optic or coaxial connectors
Operating Temperature: -20°C to +60°C
Humidity: 5–95% non-condensing

ANALOG MODULE

Analog Inputs: 8–16 channels
Voltage Ranges: ±10V, 0–10V, 1–5V
Current Ranges: 4–20 mA, 0–20 mA
Analog Outputs: 4–8 channels
Voltage: 0–10V, ±10V
Current: 4–20 mA
Resolution:16-bit ADC/DAC

Power supply

Input Voltage AC Input: 100–240V AC (±10%), 50/60 Hz
Current: 10A
Efficiency: ≥85% (typical)
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Certifications: CE, UL, IEC 61131-2, RoHS

Control Board

Operating Voltage: Typically 24 V DC
Input Voltage: 380-460 VAC
Output Voltage: 0-460 VAC
Output Frequency: 0-60 Hz
Output Power: 1.5 kW
Efficiency: Up to 98%

PC BOARD

PC BOARD
DRIVE GDC806B
REBUILT SURPLUS