PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- MNSiS Series
- 1TGE120021R0810
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1TGE120021R0810 digital switchgear gateway
ABB 1TGE120021R0810 digital switchgear gateway supports ABB MNS Digital motor-control systems. Its documented hardware combines the specified signal, processing, power and connection circuits for the exact article. During operation, it performs the assigned interface or control task through the configured system path. This arrangement provides repeatable signal handling, diagnostics and operating continuity within the approved system configuration.
BEFORE YOU BUY
Confirm the complete digital switchgear gateway
ACTUAL APPLICATIONS
Application context for 1TGE120021R0810
Applications are organized by industry, operating scenario, system category and the specific equipment served.
-
01 · MINING & METALS
Motor Control Centers and Plant Distribution Switchgear
Switchgear Integration SystemsMotor feeder protection unitsStarter command register groups -
02 · OIL & GAS
Pump Stations and Compressor Auxiliary Switchgear
Motor Communication SystemsPump station starter assembliesCompressor feeder switchgear units -
03 · WATER & WASTEWATER
Treatment Plant Motor Control and Pump Panels
Utility Drive Integration SystemsTreatment pump feeder panelsBlower motor starter groups
Technical specifications for 1TGE120021R0810
-
Product Model1TGE120021R0810
-
Product Parametersdigital switchgear gateway
-
In stock1 unit
-
ManufacturerABB
-
DCS ProtocolModbus
-
Fieldbus InterfacesRS-485, RS-422, RS-232 and Ethernet
-
Ethernet StandardIEEE 802.3 TCP/IP
-
Switchgear BusFour Modbus RTU ports
-
Connected DevicesUp to 128 M10x devices
-
Supply Voltage24 V DC
-
Supply Range19 to 31 V DC
-
Typical Current800 mA
-
Maximum Current1000 mA
-
Storage Temperature-20 to +70 °C
-
Operating Temperature0 to +55 °C
-
Protection DegreeIP51
-
MTBF46 years at 40 °C
-
Network ConnectionRJ45 LAN port
-
RedundancyPrimary and backup gateway operation
View all additional
Alternative Names
1TGE120021R0810
ABB digital switchgear gateway
ABB MNS Digital motor-control systems digital switchgear gateway
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 1TGE120021R0810 to the installed ABB MNS Digital motor-control systems
ABB 1TGE120021R0810 is a digital switchgear gateway for the ABB MNS Digital motor-control systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare switchgear bus (Four Modbus RTU ports), connected devices (Up to 128 M10x devices) and supply voltage (24 V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 1TGE120021R0810
- Product class: digital switchgear gateway
- Family: ABB MNS Digital motor-control systems
The ABB 1TGE120021R0810 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 1TGE120021R0810 identity before exchange
Replace 1TGE120021R0810 only after matching the complete article code, digital switchgear gateway, installed ABB MNS Digital motor-control systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 1TGE120021R0810
- Product class: digital switchgear gateway
- Family check: ABB MNS Digital motor-control systems
The ABB 1TGE120021R0810 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 1TGE120021R0810
- Product family: ABB MNS Digital motor-control systems
- Exact ABB identity required before service
Documentation for ABB 1TGE120021R0810 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size16.5 × 24.8 × 13.5 cm
-
Shipping weight2.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1TGE120021R0810
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which incoming-inspection checks apply to 1TGE120021R0810?
Inspect the 1TGE120021R0810 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same ABB MNS Digital motor-control systems family directly replace 1TGE120021R0810?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 1TGE120021R0810?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 1TGE120021R0810. -
Which configuration data should be backed up before exchanging 1TGE120021R0810?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 1TGE120021R0810 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected digital switchgear gateway function at a safe operating point. -
What service evidence should be retained after work on 1TGE120021R0810?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 1TGE120021R0810. -
Which nameplate details identify the correct 1TGE120021R0810 for a distributor quotation?
Quote 1TGE120021R0810 with the complete suffix, digital switchgear gateway, ABB MNS Digital motor-control systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 1TGE120021R0810 into the installed system?
Compare the documented ABB MNS Digital motor-control systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment.
READY TO VERIFY YOUR PART?
Get a 1TGE120021R0810 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
