ALL MANUFACTURERS

POWER SUPPLY BOARD

POWER SUPPLY BOARD
WITH JUMPER WIRE
Primary Input: 18–32 V DC
Backup Input: 24 V DC 
Output Voltage: 24 V DC
Output Current: 6 A
Holdup Time: ≥48 hours 
Efficiency: >85% (typical).
Ripple & Noise: <100 mV peak-to-peak

CONTROL BOARD

Ethernet (2 ports):10/100 Mbps
Voltage: 24 V DC
Power Consumption: 5-7 W (typical)
I/O Handling:up to 64 I/O channels

BW GasAlert Connectivity Kit

GA-USB1-IR IR
Connectivity Kit with
Fleet Manager II
Software

IGCT Module

Turn-off Time: ≤ 8 µs.
dv/dt: 1,000 V/µs (min)
Supply Voltage: +15V
Gate Current: 60 A
Capacitance: 5 µF (±10%)
Voltage: 2,000 V DC 
Thermal Resistance: 0.008 K/W
Mounting Pressure: 12–15 kN 

CIRCUIT BOARD CARD

I / O BOARD
DIGITAL BUFFER
CARD CAGE
Analog Inputs: 8–16 channels
Digital I/O: 16–32 channels

VOICE FREQUENCY TELEGRAPHY DEVICE

Carrier Frequencies: 300–3400 Hz 
Channel Spacing: 120 Hz or 240 Hz
Shift Range: ±30 Hz, ±60 Hz, or ±120 Hz 
Baud Rate: 50 Bd or 200 Bd 
Voltage: 48/60 VDC
Power Consumption: <15 W
Operating Threshold: -30 dBm 
Voltage: 48/60 VDC nominal 
Operating Temperature: -20°C to +65°C.

PLC BOARD

Power Supply:24V DC (±10%)
Power Consumption:≤ 5W
Isolation:1500V AC 
 Digital: 16–32 channels
Analog: 4–8 ch

USB-Hardlock Key for ECT

USB-Hardlock Key for ECT with 1 licence
Encryption:AES-128/256-bit
Hardware ID:Unique 64-bit serial number 
Operating Voltage:5V DC
Power Consumption:≤ 100 mA

PCB Board

Fiber Optic Ports: 6–12 channels
Power supply pins:+24V DC, +5V DC
Operating Voltage: 24V DC
Power Consumption: ≤ 15W
Reinforced isolation:2.5kV

CONTROL UNIT

CPU: 32-bit RISC processor.
Clock Speed: 120 MHz.
Work Memory (RAM): 2 MB
Retentive Memory: 1 MB
Program Memory: 8 MB Flash

Digital Governor Turbine Control

Input Voltage:+24 Vdc at 1 A
Keypad/Display:30 Key Multi-function Keypad
Operating Temperature:–20 to +60 °C
Outputs:2 Actuator Outputs, 8 Relay Outputs
6 Programmable Current Outputs
Slot Type:Supports RS-232, RS-422, and RS-485 hardware
Software Version:OpView™ and 505View
Storage Temperature:–40 to +85 °C

DIGITAL INPUT PROCESSOR

DIGITAL INPUT PROCESSOR
MU-PDIS12
REDUNDANCY SUPPORT
32 INPUT CHANNELS
20/30 VDC
90/132 VAC RMS

XLCNE2 Paddle Board

PC BOARD
MULTIMODE
NON-CE
TDC 3000 LCN Extender Paddle Board

Earth-fault relay

Rated Current:1 A or 5 A 
Rated Voltage:48–250 V AC/DC
Burden:< 0.5 VA
Contact Rating:5 A @ 250 V AC
Mounting:Panel-mounted 
Operating Temperature:-25°C to +55°C

Proximity measurement system

From the vibro-meter® product line
Ex certified versions for use in hazardous areas
TQ401 conforms to API 670 recommendations
5 and 10 m systems
Temperature-compensated design
Frequency response:DC to 20 kHz (−3 dB)
Measurement range:2 mm
Temperature range:−40 to +180 °C

Proximity measurementsystem

From the vibro-meter® product line
Ex certified versions for use in hazardous areas
TQ401 conforms to API 670 recommendations
5 and 10 m systems
Temperature-compensated design
Frequency response:DC to 20 kHz (−3 dB)
Measurement range:2 mm
Temperature range:−40 to +180 °C

Panel Mount Operator Advisor Panel (OPADP)

51305776100
INTERFACE MODULE ASSEMBLY
ADAPTER UNIT
OEP/IKB

Digital Input 24V IOTA Redundant

Galvanic isolation
Open wire detectio
Optional redundancy
Direct / Reverse Input Indication
Supplies Non-incendive field power
Internal or external field power selection
Extensive internal diagnostics for data integrity

HART Analog Output Module

Input Voltage:100–240 VAC (universal) 
Output Voltage:24 VDC (adjustable up to ~27 V)
Output Current:20 A continuous
Protections:Overcurrent, overvoltage, short-circuit
Operating Temperature Range:–25 °C to +70 °C

Safety Manager System Module

Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA

Electronic Earth Leakage Detector

Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA
Max. output current: 2 A
Isolation 1500 V DC / 1000 V AC
Initial contact resistance: 30 mW
Operating temperature: -5°C-+50°C (23°F-+122°F)
Max. output voltage: 36 V DC / 30 V AC

DESK OPERATOR ENTRY PANEL

TPDSOEP1100
51402497-200
TDC 3000 
Operator Keyboard
DESK OPERATOR ENTRY PANEL

FTA interconnection cable

Direct connection between two 
FS-CP series process controllers
20meters long
Shielded twisted pair design
Easy to install and use
Hot-pluggable

Digital input module

DIGITAL INPUT MODULE 
LINE MONITORED W/ FAULT MONITOR
16 CHANNELS
Functional tests of the various trip levels applied
Channel independence
Monitoring of supply voltage to input devices
Earth connection
Used supply voltages

Digital I/O module

Channels:Typically 16 I/O 
Output Types:Digital(0–10 VDC, 4–20 mA)
Analog Resolution:AI: 16‑bit; AO: 13‑bit
Power Supply:24 V DC nominal
Power Isolation:Galvanic isolation, reverse protection
Operating Temp:–40 °C to +70 °C
Enclosure / Rating:Up to IP66