ALL MANUFACTURERS

Pulse Input Module

Number of inputchannels:8, isolated channels 
Input frequency :0 to 10 kHz
Minimum input pulse width:40 µs 
Pull-up resistance:68 kΩ (12 V DC or 24 V DC)
Filter:Filter for eliminating chattering can be set
Data update period:2 ms 

Frequency Converter Drive Board

PROFIBUS/MPI or PROFINET
Control Voltage: 24 V DC (±15%)
Output Switching Frequency: 1–16 kHz 
Isolation Voltage: ≥2.5 kV AC
Operational Temperature: 0°C to +50°C

Inverter control board

Control Voltage: +24 V DC
Switching Frequency: 5 kHz–15 kHz
Output Pulses: ≥8 PWM
Digital: Start/stop, fault reset
Analog: ±10 V 
Operating Temperature: –10°C to +50°C

Inverter control board

Inverter control board 
IGD9 for devices 510-620 V DC
1300 A
Logic Supply Voltage: +24 V DC (±10%)
DIP Switches:0–10 V, 4–20 mA
Operating Temperature: 0°C to +40°C 
Humidity: ≤95% (non-condensing)

INVERTER DRIVE TRIGGER BOARD

Control Voltage: 24 V DC (±10%)
Isolation Voltage: ≤2.5 kV AC 
Output Frequency: ≤20 kHz
Max Output Current: 3–5 A
Signal Logic: 0–24 V DC control signals
Operating Temperature: –10°C to +55°C
Storage Temperature: –40°C to +85°C
Relative Humidity: ≤93% (non-condensing)

Frequency converter trigger driver board

Logic Circuit: 24 V DC
Isolation Voltage: ≥2.5 kV AC
Output Current: Up to 2–3 A
Frequency Range: 1 kHz–20 kHz
Operating Temperature: 0°C to +60°C
Humidity: ≤95% (non-condensing)

TRIGGER CONTROL BOARD

DRIVER BOARD
TRIGGER CONTROL BOARD
SINAMICS PWB
1080 VDC
810-1025 AMP

Impedance capacitance plate

SIMOTRAS HD Snubber circuit 
Rated Voltage (Unm): 690 V AC (50/60 Hz)
Operating Voltage Range: 200–750 V AC
Capacitance: 10–50 μF
Impedance Range: 5–50 Ω at 50 Hz
Dielectric Strength: 2.5 kV AC

Digital Output Baseplate

I/O Baseplate
I/O Interconnect Assembly
Slot Cover
Terminal Cover
Muber of Chanels: 24
Output Current: 2A
Output Voltage: 24VE
CA per channel
Power Consumption:20w

Digital Input Module

Points:4, commoned-return, DC-coupled
Output current range:
4–20 mA output, controlled
0–22 mA over-range
0 mA output capability (step function <2 mA)
Type:TMR
Resolution:12 bits
Diagnostic:Forced-switch diagnostic (FSD)
Over-range protection:36 V DC, continuous

Digital Input Module

Points:32, commoned
Nominal input voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum input voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Input delay:<10 ms, On to Off or Off to On
ADC scan time:<1 ms for all 32 points

Digital Output Module

Points:16, commoned
Nominal output voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum output voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Leakage to load (Off-state):<1 mA
On-state voltage drop:<1 V DC @ 1.5 A
Loop-back scan time:<1 ms for all 16 points

ANALOG INPUT MODULE

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)
Scan time:<1 ms for all 32 points

Contact And Non-Contact Thermometer

Offers a distance-to-spot ratio of 50:1
Works with most K-type thermocouples
Allows easy access to advanced features 
with soft-key buttons and graphical display
Captures up to 99 points of data for 
quick downloading to a PC through the USB connection
Quickly identifies problems with MIN, MAX, AVG, and DIF functions
Easily adapts to lighting conditions with a two-level backlight

Handheld Digital Multimeter

DBV / dBm measurement
1 μV resolution in DC mV range
Current measurement 20 A 
(30 seconds momentary, 10 A continuous)
Peak capture function to record transients as fast as 250 μs
Continuity / Conductance / Capacitance
Resistance and continuity
Duty cycle & pulse width measurement
Min / Max / Average with Time Stamp to record signal fluctuations
Real time and elapsed time modes
CAT III 1000 V / CAT IV 600 V safety rated

Analog Input Module

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum reverse field voltage:– 0.6 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)

Digital Input Module

Points:32, commoned
Nominal input voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum input voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Input delay:<10 ms, On to Off or Off to On
ADC scan time:<1 ms for all 32 points

Analog Output Module

Type:TMR
Resolution:12 bits
Diagnostic:Forced-switch diagnostic (FSD)
Points:4, commoned-return
Output current range:4–20 mA output, controlled
External loop power:32 V DC, maximum24 V DC, nominal

Digital Output Module

Points:16, commoned
Nominal output voltage:24 VDC
Specified operational voltage range:15 to 30 VDC
Absolute maximum output voltage:33 VDC
Absolute maximum reverse input voltage:– 0.6 VDC
Leakage to load (Off state):<1 mA
Diagnostic glitch duration <2 ms, maximum:500 Ps, typical
On state voltage drop:<1.0 VDC @ 1.5 A

Embedded CPU Board

Motorola PowerPC
SDRAM: 128 MB–1 GB
Non-Volatile Storage: 4–32 MB Flash
1–2 x 10/100BASE-T Ethernet 
2–4 x RS-232/422/485
CRT/VGA output

Single-board

Processor Module Assembly
10/100 Ethernet (RJ-45)
2–4 x RS-232/422/485
Support for MIL-STD-1553
Clock Speed: 500 MHz–1.2 GHz
VMEbus Interface: VME64x

Remote I/O Controller Module

I/O Channels: 4–20 mA
Scalability: 8–16 I/O points per module 
Data Transfer Speed: Up to 100 Mbps 
Voltage: 18–32 VDC
Current Draw: <2 A typical 
Operating Temperature: –40°C to +70°C 
Storage Temperature: –50°C to +85°C
Humidity: 5–95% RH (non-condensing)

Industrial Motherboard

Slots: 1–2 x SODIMM slots
Capacity: Up to 16–32 GB
Chipset: Intel H110/Q170 or AMD
Network:2–4 x Gigabit Ethernet
Power Input:12–24 V DC
Wide operating temperature:(-40°C to +85°C with proper airflow)
Humidity tolerance: 5–95% (non-condensing)

Actuator

SQM10.16502 
Actuator
10Nm
90°/29s
130°/42s
5 aux switches
start torque 15Nm
AC230V

BASEPLATE

BASEPLATE
ANALOG I/0 MODULE
W/HEAT SINK
Supports 8/16-channel analog I/O modules