Series:VersaMax
Product Type:Compact box-style I/O carrier
No. of Terminals:36 terminal
Single-Wire Cross Section:0.36 mm2 to 2.1 mm2
Two-Wire Cross Section:Up to 0.86 mm2
Current rating per point:2 A
Voltage rating:0-264 VAC
Current per Point:2 Amps
Current rating per each power terminal:8A
Current rating, per point:2 Amperes
Voltage supply, max:264 VAC
Current rating per ground and power segment:8 Amperes
Maximum Voltage per Point;264 Volts AC
Transient voltage, max:300 VAC
Series:Field Control
Manufacturer:GE Fanuc
Part Number:IC670CHS001
Type of Component:I/O Base, Barrier Style
Number of Terminals:37
Product Description:I/O Carrier Module
Carrier module terminals:Barrier style
Terminal Torque:8 pounds on an inch
No. of Terminals:37 terminals
Insulation rating:90 Degree Celsius
Tightening torque:8 in-lb.
Mounting:DIN Rail / Panel mount
Series:Versamax
Part Number:IC200MDL643
Product Description:Discrete Input Module
Number of Points:16 Inputs
Number of groups:2
Input Impedance:2.4K Ohms
Series:RX3i PacSystem
Part Number:IC695CHS012
Compatibility:RX3i PACSystem, Series 90-30 and option modules
Number of Slots:12
Backplane Support:Supports both PCI and High Speed Serial
How Swap Support:Yes
Internal Power, 5VDC:240 milliamps
Internal Power, 3.3 VDC:600 milliamps
Mounting:Rack
Type:Universal backplane
Input:+24 Volts
Backplane Orientation:Horizontal
Series:VersaMax
Part Number:IC200ALG331
Output signal, nominal:4-20 mA; +/- 10 VDC
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
Backplane current:10 mA @ 5VDC; 115 mA @ 3.3 V
Configurable output default:Hold Last State; 0 (configurable)
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
Series:Series 90-30
Part Number:IC693CPU363
User memory:240K Bytes
CPU type:Single slot CPU module
Register memory:240 kilobytes
Serial port:RS-485 (via power supply
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Serial ports:3
Clock speed:25 Megahertz
Microprocessor:80386EX
Discrete inputs:2048
Discrete outputs:2048
Type of Memory Storage:RAM and Flash
ANALOG INPUT/OUTPUT MODULE
I/O PACK
FOR A GE SPEEDTRONIC MKVIE
GAS TURBINE CONTROL
Ambient Temperature Range:-40 to 158°F
Analog Transmitter Power:22.8 VDC
Input Voltage: 24V DC nominal
Power Consumption: 1.5 W
Current Draw:24V DC: 90 mA
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% (non-condensing)
Nominal: 24 V DC
Maximum: 32 V DC
Maximum per output: 0.5 A
Total current limit: 6 A
Operating Temperature Range: -30°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH (non-condensing)
Series:Series 90-30
Part Number:IC693MDL645
Module type:Positive / Negative Discrete input
Input Voltage Range:0-30 VDC
Nominal Input voltage:24VDC
Input Current (mA):7 mA
Number of points:Sixteen (16)
Module width:Single (1) slot
Module type:Discrete input
Power Type:DC
Input Voltage Range:0-30 VDC
Input Current (mA):7
Number of points:16
Response Time (ms):7 ms on, 7 ms off
