ALL MANUFACTURERS

PCB Board

Digital I/O Channels: 24 V DC
Input Voltage: 24 V DC (±10%)
Analog Inputs: Support 4–20 mA or 0–10 V
Operating Temperature: 0°C to +55°C (32°F to 131°F).
Storage Temperature: -20°C to +70°C (-4°F to 158°F).
Humidity: 5–95% non-condensing.

Stratix Managed Switches

UNMANAGED ETHERNET SWITCH
STRATIX 2000 3+1 PORT
3-PORT 10/100 MBPS COPPER 
(FULL OR HALF DUPLEX) 
AND 1-PORT 100BASE-FX MULTIMODE FIBER 
(LC CONNECTOR)
UNMANAGED
20V AC/ 24V DC POWER

OPERATOR INTERFACE

Part Number/Catalog No.:2711P-K4M5A
Product Line:Panelview Plus 400
Display Size:3.5 inch
Display Color:Grayscale
Input Type:Keypad
Communication:RS-232 Port
Input Power:AC
Memory:64 MB
Series:A, B, C, D, E

POINT I/O Digital DC Sinking Output Module

Series:POINT I/O
Module Type:Digital DC Sinking Output Modules
Outputs:2
Output Voltage:24 Volts DC
Electronically Protected:Yes
POINTBus Current:75 milliamps
Output Current:2 amps/module
Power Dissipation:0.8 Watts
Thermal Dissipation:2.7 BTU/hour

MicroLogix 1500 Base Unit

I/O Rating:2 inputs/ 12 outputs
No. of Inputs:12 inputs
Input Voltage:120 Volts AC
Input channel Voltage:120 VAC
Output Source Relay:Port
No. of Outputs:12 outputs
Max Expanded I/O Count:512
Output channel Voltage:24-125VDC; 120-240VAC
Power Supply Voltage:85-265 VAC

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive, 
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

Analog Combination Module

Product Type:nalog Combination Module
Product Series:Distributed I/O
Analog Inputs:8
Operating Voltage:24V DC
Response Time:20 ms
Current Consumption:0.8 A max.
Input Resolution:12 bits
Terminal Block Torque:0.51 Nm
Analog Outputs:4

PCBA CIRCUIT BOARD

Voltage: 24V DC or 48V DC
Power Consumption: 10–50W
Protection: Overvoltage/overcurrent protection

Semiconductor Circuit Board

Power Requirements: 24V DC
Signaling Interfaces: Communication protocols
Operating Temperature: 0–50°C
Protection Rating: IP20

Trusted CCoat 4 Way Expander Intfc

Voltage Range: 18 Vdc to 32 Vdc
Power Consumption: Maximum 1.7 W
Transmitter Power: Minimum -15 dBm
Receiver Sensitivity: -28 dBm
Maximum Propagation Time Difference: 80 ns
Maximum Fiber Length Difference: 15 m
Operating Temperature: 0°C to 60°C (32°F to 140°F)
Non-Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Relative Humidity: 10% to 95% non-condensing

Trusted CCoat Fiber Tx Rx Unit

Voltage Range: 18 Vdc to 32 Vdc
Power Consumption: Maximum 1.7 W
Transmitter Power: Minimum -15 dBm
Receiver Sensitivity: -28 dBm
Maximum Propagation Time Difference: 80 ns
Maximum Fiber Length Difference: 15 m

Trusted 24V DC Roof Mounted Fan Tray

Simple installation and connection
Capable of moving 69 m3/h (40.6 ft3/min)
24 Vdc operation
Low noise (32 db per fan)
Meets IP20 with roof cowl fitted

Trusted CCoat Expan Proc Module

Supply Ratings:20 - 32 Vdc, 45 W
Backplane (IMB) Supply:20 Vdc to 32 Vdc
Power Dissipation:45 W Backplane Supply
Module Location:T8300 Expander Processor Slot
Fusing Not User Serviceable
Operating Temperature :0 °C to +60 °C (+32 °F to +140 °F)
Storage Temperature: -25 °C to +70 °C (-13 °F to +158 °F)
Relative Humidity :10 % – 95 %, non-condensing

Trusted Power Distribution Unit

Visual indications of input power supply status.
Visual indication of individual fuse status.
Common alarm of fuse status via volt-free contact.
Link selectable supply voltage options

Trusted Power Distribution Unit

Voltage Range 22 Vdc to 28 Vdc
Input Current 60 A max
Conductor Clamping Range (LU10.16) 0.5 mm2 to 16 mm2
Max Switching Voltage 60 Vdc or 125 Vac
Operating Temperature 0 °C to +60 °C (+32 °F to +140 °F)
Non-operating Temperature -25 °C to +70 °C (-13 °F to +158 °F)

Trusted Output Power Distribution Unit

Supports up to three Trusted Sourcing Output Modules.
Dual stud power connection for either single or dual feed.
0 V module reference via BLZ 2-part connectors.

Power Shelf

POWER SHELF 4U MOUNTING KIT POWER PORT MAINS PLUGS
19 inch x 1U chassis 
for up to 3 Power Packs.
Includes 4U fixing kit, 
Power Port (with push fit BLZF3.5/10 connector), 
mains plugs and retaining clips

Trusted TMR I/O SmartSlot Slot Cables

Cable Type: Multi-core shielded cable
Length: 2 meters 
Voltage Rating: Typically rated for 300 V AC/DC
Current Capacity:4–20 mA analog
Operating Temperature: -40°C to +85°C