ALL MANUFACTURERS

Advanced Valve Positioner

Linear or rotary motion control valve
±0.5% of span (including linkages)
0.3% of span *1
Digital: FOUNDATION fieldbus
Supply voltage: 9 to 32V DC
Supply current: 17 mA (max)
140 to 700 kPa (20 to 100 psi)
0.32 Nm3/h (0.178 SCFM) at 140 kPa (20 psi) of air supply
6.6 Nm3/h (4.1 SCFM) at 140 kPa (20 psi) of air supply 
-40 to 85 deg C (-40 to 185 deg F)

CONTROL BOARD

51401551301
CONTROL BOARD
K2LCN-3
MULTI INPUT/OUTPUT
PANEL MOUNT
SINGLE SLOT

Fiber Optic Repeater Module

RFO810
Up to 3 km
Supports HN800 or CW800 bus interfaces
Requires use of HBX01L/HBX01R for bus terminations
24V DC
20°C to +60°C

Module Card

Input Voltage:24 V DC (±20%)
Power Consumption:≤ 5 W 
Output Power:24 V DC to modules 
Communication Ports:1 × RS-485 
Data Rate:Up to 12 Mbps
Isolation :500 V AC 

Control Processor Module

Harmony-07
Control Processor Module
High-performance processing unit for real-time control and data processing
Supports industrial communication protocols such as Modbus, Profibus, Ethernet/IP
24V DC
-20°C to +60°C

PBA to HN800 Cable

SPK800-PBA1-01
Cable
1.0 Meter
PBA800 interface
HN800 device interface
Supports TER8x0 terminator to redundant PBA800 adapters for connection
Digital signal transmission

Terminal Module 

Select I/O
Terminal Module 
Module Termination Unit for Select I/O IS
Two slots for connection of Generic I/O modules 

Digital Output Module

NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply

Termination Loop Cable

NKSD01-15
Termination Loop Cable
Shielded twisted pair or other cable 
types suitable for industrial applications
15 meters

SOE clock module

Input Voltage:24 V DC
Power Consumption:≤ 8 W 
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms 
Time Resolution:1 ms
Isolation:1500 V AC

SOE Master Module

SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C

Power Entry Panel Dual Chassis

PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements

Termination Cable

Model: NKHS03-15
Type: Termination Cable
Cable Length: 15 meters
Interface Type: Compatible with ABB system modules

Analog Input Terminal Board

Model: NTRO12-A
Type: Analog Input Terminal Unit
Signal Type: High-Level Analog Signals
Number of Channels: 12
Product Type: Module_Termination_Unit

Analog Input Terminal Board

Model: NTAI05-A
Type: C
Number of Channels: 16 Channels
Signal Type: High-Level Analog Signals
Product Type: Module Termination Unit

ACS800 R2 to R6 STO Frequency Converter

Safety Category:Category 3 (EN 954-1) 
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
Isolation Reinforced isolation : 500 V AC

Digital Output Module

Number of outputs 16-channel, module isolation 
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 3.4 A minimum
Maximum leak current at output off status 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 120 to 685 Ω 
Output response time 30 ms maximum

IGCT Module

Blocking Voltage 4500 V DC
Reverse Voltage:30 V 
Max RMS Current:4000 A
Peak Surge Current :32 kA
Turn-On Time: ≤ 3 µs
Turn-Off Time: ≤ 5 µs
Switching Loss: ≤ 15 kJ/s at 500 Hz

Digital Input Module

Input Channels:32
Galvanic Isolation:1000 VAC RMS
Isolation Technique:Optical (in IOM)
DI Power Voltage Range:18 to 30 VDC
ON Sense Voltage/Current:13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current:5 VDC (max) or 1.2 mA (max)
Input Impedance:4.2 K
Absolute Delay Across Input Filter and Isolation:5 ms ± 20%

Inverter Filter Plate

Rated Voltage:380–480 V AC, 3-phase (±10%)
Rated Current:100 A (at 40°C ambient)
Frequency:50/60 Hz
Leakage Current:< 5 mA (at 480 V AC)
Insulation Resistance:> 100 MΩ (500 V DC)
Dielectric Strength:3000 V AC

CONVERTER POWER BOARD

3-phase AC: 380–480 V AC
DC Bus Voltage:520–720 V DC
Power Rating:Typically 1–50 kW
Operating Temperature:-10°C to +50°C
Storage Temperature:-40°C to +85°C