ALL MANUFACTURERS

Binary Control Module

Range: Typically 20.4 V DC
Series: 83SR Safety Relay System
Channel-to-Backplane/Logic: Yes 
Isolation Voltage: Typically 250V AC
Safety Certification: TÜV Rheinland certified

FTA interconnection cable

System Interconnection Cable For Chassis IO
FS-SICC-0001/Lx (where × = length)
20 × AWG 22 (= 0.34 mm²) double shielded
9.93 mm / 0.39 in
3 = 3m 

MNS iS Motor Control Center

PROFIBUS DP (-V0) and PROFIBUS DP-V1
MODBUS RTU / TCP 
Power Supply 24V DC
Power Consumption Typical 1000mA

INVERTER TRIGGER DRIVER BOARD

Input Voltage: 24 V DC
Operating Temperature: -10°C to +70°C.
Storage Temperature: -25°C to +85°C.
Humidity: 5% to 95% non-condensing.

AC drive

Output Current: 105 A
Integrated Filter: L500 
Frame Size: R7
Cooling Method: Air cooling 
Voltage:3-phase 380–480 V AC (±10%)
Frequency:47–63 Hz
 Input Current:120 A
Motor Power Range:55–75 kW 
 Apparent Power (S1):89 kVA (at 480 V)

Pressductor PillowBlock Web Tensiometer

Measurement Range:0–50 kN 
Accuracy"±0.5% of full scale (typical)
Digital Option:RS-485 Modbus RTU 
Excitation Voltage:10–30 V DC
Bridge Resistance:350 Ω ±1%
Cable Length:Standard 10m
Overload Capacity:150% of rated range 

CONTROL DISTRIBUTION BOARD

Rated Operational Voltage (Ue) :230/400V AC (50/60 Hz)
Rated Insulation Voltage (Ui):500V AC
Rated Current (In):Up to 100A
Short-Circuit Capacity (Icn):10 kA 
Mounting Depth:10–120 mm
Material :Galvanized steel 

Main Circuit Interface Card

System Voltage:24 V DC (19.2–30 V DC)
Power Consumption:≤ 1.5 W (typical)
Communication Protocol:Profibus DP-V1
Modbus RTU (via FCI module)
Isolation:Galvanic isolation between 

HRC FUSE LINK

Fuselink
rated current 500A
size NH3
rated voltage 500VAC / 250VDC
utilization category gG
rated breaking capacity 120 kA (AC) / 80 (kA DC)

Binary Input Unit

Input Channels:16 
Input Type:Dry Contact or 24V DC Sourcing
Voltage Range:19–30 V DC
Input Current:3–5 mA per channel 
Logic Levels:"1" (ON): +15–30 V DC
"0" (OFF): 0–5 V DC
Response Time:≤ 2 ms (ON/OFF)
Overvoltage Protection:60 V DC (continuous), 75 V DC (1s)
Isolation:1500 V AC

Digital Output Module

Optional redundancy
Electronic Overcurrent protection
Configurable Safe-state (FAILOPT)
Extensive internal diagnostics to ensure data integrity
Latched, pulsed or pulse-width modulated output(per channel)

UNITROL CARD

Input Voltage :24 V DC (±20%) 
or 48 V DC (±20%)
Analog Inputs:6 channels 
Digital Inputs:8 channels 
Analog Outputs:4 channels 
(0–20 mA / 4–20 mA)
Digital Outputs:6 channels
Processing Speed:32-bit DSP 
Communication:RS-485 Modbus RTU, CANopen

I/O Module Adaptor

Data Transfer Rate:Up to 12 Mbps (PROFIBUS)
Isolation Voltage:1.5 kV AC
Power Supply:24 V DC
Power Consumption:≤ 1.2 W

C300 Series Power Supply

Power System (20A)
Redundant (2 power supplies)
120/240 VAC
with 24VBackup Battery Assembly

Binary I/O Module

Input Channels:16x Binary Inputs
Output Channels:10x Binary Outputs
Contact Rating (Outputs):5A @ 250V AC/30V DC
Input Voltage Ranges:24/48/110/125 V DC
Input Threshold (ON):>70% of rated voltage
Response Time:<10 ms 
Isolation Voltage:2.5 kV AC 
Power Consumption:≤ 5 W