Module Type:Network Slave Module
Number of Stations:32 w/out repeaters,
up to 125 with
I/O Data: 384 Bytes
Connector:9-pin D-sub
Network Data Rate: 9.6 Kbaud to 12 Mbaud
Power Consumption: 460 mA from 5 V output
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CMM311
Product Type:Communications Coprocessor Module
RS-232 Applications:Supported
Mounting:Baseplate mounted
Module Location:CPU baseplate only
Status LED indicators:Module OK; PORT1; PORT2
LED indicators:Module OK; US1; US2
Current load:400 mA
Bus voltage:+5VDC
No. of CMM module per baseplate:4
Part Number:IC200PWR102
Series:VersaMax
Input Voltage, range:85-132 VAC; 176 - 264 VAC
Input Voltage:120/240 Volts AC
Product type:Expanded Power Supply
Output current, Total:1.5 A, maximum
Input frequency:47-63 Hz
Output Voltage:5 Volts DC and 3.3 Volts DC
Output Voltage:5 VDC; 3.3 VDC
input voltage, nominal:120 VAC; 240 VAC
Total output current:1.5 Amperes
Input Power:27 VA
Input frequency:47-63 Hz
Output current at 3.3 VDC:1.0 A, maximum
Holdup Time:20 ms
Input power:27 VA
Output current at 5VDC:1.5 A, maximum
Total Output Current:1.5 Amperes Maximum
Holdup time:20 ms
Output voltage:5.5 VD; 3.3 VDC
Series: Mark V LM
Operating temperature: -30 to 65 ºC
Power Supply Voltage: 28 V dc
Board Size: 23.8 cm high x 8.6 cm
Weight: 0.45 kg
Number of inputs: 6
Number of outputs: 2
Current-limited +24 V DC output.
Standard +24 V DC power supply
Current input 4-20 mA circuits
Operating Temperature: 0°C to 60°C.
Storage Temperature: -40°C to 85°C.
Humidity: 10% to 95% RH (non-condensing)
POWER QUALITY METER
20-60VDC/20-48VAC
50/60HZ
20VA
ONE 4 TO 20 MA ANALOG INPUT
FOUR (4) OUTPUT RELAYS / FOUR (4) SWITCH INPUTS
FOUR (4) ISOLATED ANALOG OUTPUTS SETPOINTS
FOR ALARM OR CONTROL
MODBUS COMM 2 REAR RS485
PORTS 1 FRONT RS232 PORT
9907014
SPEED CONTROLLER
2301A
FORWARD ACTING
4-20 MA
1-5 VDC
SUPPLY VOLTAGE 10-40 VDC
SPEED SENSING 1 TO 30 VDC
SIGNAL TO ACTUATOR 0 TO 200 MA
FOR DIESEL OR GAS ENGINE
FOR STEAM OR GASE TURBINE
Range:-10 to +10 V, 0 to 10 V
Part Number:IC693ALG222
Series:Series 90-30
Brand:GE Fanuc
Input Types:Unipolar and bipolar
Product Lifecycle Status:Discontinued/Obsolete
Product Description:Analog Voltage Input
Linearity:< 1 LSB
No of Channels:16
Update Rate:13 ms for all channels
Series:Series 90-30
Part Number:IC693ALG442
Accuracy:0.25% at 25 degree Celsius
Product Lifecycle Status:Discontinued/Obsolete
No of Output Channels:2, single-ended
Update Rate:8 milliseconds
No of Input Channels:4 differential
Resolution at 0-10 V:2.5 mV
Resolution at -10 to 10 V:5 mV
Input Impedance:800 K Ohms
Series:Series 90-30
Part Number:IC693ALG392
Resolution at -10 to 10 V:0.312 mV
Product Lifecycle Status:Discontinued/Obsolete
No of Channels:8
Current Range:4 to 20 mA, 0 to 20 mA
Voltage Range:0 to 10 V, -10 to 10 V
Update Rate:8 ms all channels
Resolution at 0-10 V:0.312 mV
Holdup time:14 milliseconds, minimum
Load capacity:30 Watts
Part Number:IC693PWR331
Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485
No. of Outputs:Three (3)
Nominal Rated Voltage:24VDC / 48VDC
Voltage:24 Volts DC
Standard:UL, CE
Full load power rating:50 Watts
Number of terminal screws:3
LED indicators:PWR, OK, RUN, BATT
Description:Power Supply device
Series:Series 90-30
Part Number:IC693CPU350
Serial port:RS-485 via power supply
CPU type:Single slot CPU module
User Memory:32K Bytes
Processor type:80386EX
Type of Memory Storage:RAM and Flash
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Clock speed:25 Megahertz
Current input:670 milliamps
Voltage input:5 Volts DC
Timers / counters:> 2000
