Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Frequency Range (-3 dB):0 to 20,000 Hz
Rise Time:<15µs
Supply Voltage Range-23V to -32V
Model Number:2MLL-DMEB
Type:DeviceNet Master/Scanner Module
Input Voltage:24V DC (18-36V)
Power Consumption:5.5W (typical)
Network Interface:5-pin screw terminal
Isolation:1500V AC
Surge Protection:±2kV
Model Number:2MLL-CH2B
Type:High-Speed Computer Communication Interface
Input Voltage:24V DC (18-36V)
Power Consumption:3.8W
Isolation :1500V AC )
Port Configuration:2x serial ports
Surge Protection:±2kV
Data Rate:300-115.2kbps
Model Number:2MLL-C42B
Type:High-Density Analog I/O Module
Channels:4 AI + 2 AO (Isolated)
Resolution:16-bit (0.0015% of span)
Voltage Ranges:±10V, 0-10V
Current Ranges:0-20mA, 4-20mA
Accuracy:±0.05% of span
Update Rate:10ms/channel
Isolation:1500V ch-ch
Product Type : Fast Ethernet
Modules : 2MLL-EFMFB
Ethernet Standard : IEEE802.3U
Protocol : TCP-IP, UDP-IP
Input Voltage:24V DC (18-36V)
Power Consumption:5.5W (max)
Isolation :2500V AC (copper-to-fiber)
Surge Protection:±4kV
Input point:8 point
Isolation method:Photo coupler isolation
Rated input voltage:DC24V
Rated input current:About 4 ㎃
Operation voltage range:DC20.4~28.8V
Input Derating:None
On Voltage/Current:DC19V or higher / 3 mA or higher
Off Voltage/Current:DC11V or lower / 1.7 mA or lower
Input resistance:About 5.6 kΩ
Input Voltage:24VDC (18-36V)
Power Dissipation:28W (35W peak)
Isolation :3000V AC (field/logic)
Analog I/O:6 ch (16-bit, ±0.025%)
Digital I/O:12 ch (2A STO outputs)
PWM Output:50kHz
Input Voltage:24V DC (20-30V, PELV)
Power Consumption:25W (normal)
Isolation:3000V AC (field to logic)
Safety Inputs:8 channels (24V DC, certified)
Safety Outputs:6 channels
Analog Monitoring:4 channels
Expansion Drive
I/O Interface Module
TP/CAT5
Input Voltage:24V DC
Power Consumption:15W (typical), 25W (max)
Isolation Voltage:2500V AC
Digital Inputs:6 channels
Digital Outputs:4 channels
Analog Outputs;2 channels
Input Voltage:24V DC
Power Consumption:7.2W (normal)
Isolation:2500V AC (field/controller)
Analog Inputs:4 channels
Digital I/O:8 configurable safety channels
AI Accuracy:±0.05% of span
Analog Input 4-20mA/0-10V
Digital Input24V DC, 3mA wetting current
Input Voltage:24V DC
Power Consumption:5.5W (operational)
Isolation:2500V AC (field/logic)
Digital Inputs:8 safety channels
Digital Outputs:8 safety channels
Model Number:2MLR-DBSH
Type:High-Density Hybrid I/O Module
Input Voltage:24V DC
Power Consumption:6.8W
Isolation Voltage:1500V AC
Analog Inputs:8 channels
Digital I/O:16 channels
Input Ranges:0-10V, ±10V, 0-20mA, 4-20mA
Input Voltage:24V DC (20-30V range)
Power Consumption:4.2W
Isolation Voltage:2500V AC
Digital Inputs:8 channels
Digital Outputs:8 channels
Input Current :7mA per point
Output Switching Capacity:0.5A continuous
Input Voltage:24V DC (18-36V range)
Power Consumption:3.5W (typical)
Isolation Voltage:1500V AC (field to logic)
Digital Inputs:16 channels
Digital Outputs:16 channels
Input Current :4mA per point (typical)
Output Current:0.5A per point (2A total)
Model Number:2MLR-E12H
Type:Redundant Expansion I/O Base
Input Voltage:24V DC (18-36V range)
Power Consumption:6W (typical), 10W (max)
Backplane Current:2A (max, per channel)
Isolation:1500V DC
Max Current per Slot:500mA
