ALL MANUFACTURERS

Current Input Module

Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Withstand voltage 1.5 kV AC between input signal and system for 1 minute

UNITROL 1010 Voltage Regulator

Generator Voltage:100–690V AC (50/60 Hz), 
Field Voltage (Output):10–250V DC
Regulation Accuracy:±0.5% 
Response Time:<30 ms 
Auxiliary Supply:24/48/110/250V 
Power Consumption:≤25 W (standby)

Handheld communicator

Mobility MFC Hand Held Configuration Device
Display:4.3" TFT LCD 
Touchscreen:Capacitive (glove-friendly)
Processor:ARM Cortex-A8 @ 800 MHz
Memory:512 MB RAM, 4 GB Flash
Charging:AC adapter (100–240V)
Operating System:Linux-based RTOS

Input Module

Number of inputs 16-channel, module isolation
Input current 6 mA ± 20 % 
Contact rating 24 V DC +20 % / -10 % 
External power supply 24 V DC +20 % / -10 % 
Input response time 40 ms maximum
Withstand voltage (*1) (*2) 2 kV AC 
between input signal and system for 1 minute
16-input line collectivelyconnected

Power Voting Unit

Input Channels:24V DC signals
Response Time:<10 ms
Operating Voltage:24V DC
Power Consumption:≤ 5 W
Isolation:1.5 kV AC

POWER SUPPLY BOARD

Acs880/580 Series Inverter
Input Voltage: 1-phase/3-phase input 
AC Input: 200–500 VAC
DC Input: 500–700 VDC
Frequency: 50/60 Hz
Output Power: ≤ 100 W
Output Voltage: Supplies +24 VDC
Load Capacity: 5 A @ 24 VDC

MC INTERFACE BOARD

Input Voltage: Typically 24V DC
Output Signals: Digital and analog signals for 
motor control and feedback.
Current Consumption:100-500mA 
Communication Voltage Levels: 3.3V or 
5V logic levels for digital communication.

Touch screen

Screen Size: 7 inches (diagonal).
Resolution: 800 x 480 pixels.
Display Type: TFT LCD with vibrant colors and excellent contrast.
Touch Screen Type: Resistive touch for accurate and reliable input.
Brightness: 400 cd/m².
Colors: 65,536 colors for sharp and detailed visualization.
Viewing Angle: ±70° )

Main Control Board

DCS880
SDCS-CON-H01
Main Control Board
Operating Voltage:24 V DC (±10%)
Current Consumption:≤1.5 A
Digital I/O Channels:32 optoisolated DC I/O points
Analog I/O:±10 V DC / 4–20 mA

ACS880 AC Drive- 500V, 3PH, wall mount, regenerative

LV AC industrial wall-mounted regenerative single drive
Input Supply:3-phase 380–480V AC (±10%), 50/60 Hz
Output Power:5.5 kW (7.5 HP) @ 400V AC
Output Current:21 A continuous (40°C ambient)
Overload Capacity:110% for 60s, 150% for 2s
Output Frequency:0–500 Hz (motor-dependent)
Efficiency:>98% (at full load)
Power Factor:0.98 (min)

Digital Output Module

INPUT/OUTPUT CARD DIGITAL OUT RELAY
8 CHANNELS
0-60 DEGREES CELSIUS OPERATING TEMPERATURE
250 VAC
30 VDC
4 AMPS MAX PER RELAY
40MA MAX AT 5 VDC
200MA MAX AT 24 VDC

Digital Input Module

Digital Input
120/240 VAC125VDC
16 Ch 
HC900
16POINT
130MA MAX / 5VDC
120/240VAC

Power Distribution Board

PC BOARD
POWER DISTRIBUTION BOARD
8 CHANNEL
24 VDC
2 A CC

Terminal base

Terminal base
For AC500 V3. 1 slot for communication module. 
2 Ethernet interfaces
1 serial interface
1 CAN interface (TB5610-2ETH)

Prog.Log.Control

Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Analog Inputs:2
Analog Outputs:1
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):230 V AC
Supply Voltage:100 … 240 V AC

Processor module

Processor module
Memory 80MB
Interfaces: 2 Ethernet
RS232/485, CAN. 
Display (PM5650-2ETH)
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC
Memory Size: 369256 kB
Memory Type User Data:RAM

Harmony Electronic Module

Harmony Block I/O 
Series: ABB Harmony HX
Function: 16-Channel Universal Input Module
Resolution:16-bit
Accuracy:±0.2% of full scale (25°C)
Sampling Rate:100 ms per channel
Input Impedance:>1 MΩ (voltage), 250 Ω (current)
Isolation Channel-to-channel: 300V AC
Power Supply:24V AC/DC (±15%), 5W max

Bay Control Display

Relion 670 series 
Display:5.7" TFT LCD (320 × 240 pixels)
Input Method:6x tactile keys + navigation wheel
Operating Voltage:48–250V DC or 110–240V A
Power Consumption:≤ 15 W
Operating Temperature:-25°C to +70°C

PSR CONTROLLER

Rated Power: 22 kW (30 HP)
Supply Voltage:3-phase 208–690V AC (50/60 Hz)
Motor Voltage:220–690V AC 
Rated Current:42 
Starting Current:Adjustable: 1.5–5× FLC 
Control Voltage:24V DC/110–240V AC
Max. Starts/Hour:10

Main Control Board

Processor:PowerPC 750GL @ 400 MHz
Memory:128 MB SDRAM
Control Capacity:Up to 60,000 function blocks
Operating Voltage:5V DC
MTBF:>500,000 hours 
Mounting:AC 800M controller baseplate