ALL MANUFACTURERS

3300 XL 8 mm Probe

3300 XL 8 mm Probe
M10 x 1 thread
with armor 
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector with connectorprotector, 
standard cable
00 Not required
Order in increments of 10 mm
Length configurations:
Maximum unthreaded length: 230 mm
Minimum unthreaded length: 0 mm
Example: 0 6 = 60 mm

PROBE PROXIMITY VIBRATION 8MM

7200 5mm / 8mm Series 
Proximity Transducer Systems
Frequency Response: 
0 Hz (DC) to 10 kHz
Noncontacting
Gap-to-Voltage Transducer Systems
Measures Static and Dynamic Distances

PROBE PROXIMITY VIBRATION 8MM

Frequency Response: 
0 Hz (DC) to 10 kHz
Noncontacting
Gap-to-Voltage Transducer Systems
Measures Static and Dynamic Distances

3300 XL 8 mm Proximity Probes

3300 XL 8 mm Probe
3/8-24 UNFthread
with armor
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector, 
standard cable
05 CSA, ATEX, IECEx  Approvals
Order in increments of 0.1 in.
Length configurations:
Maximum unthreaded length: 8.8 in.
Minimum unthreaded length: 0.0 in.
Example: 0 4 = 0.4 in.

3300 NSv Extension Cable

060 6.0 meters (19.7 feet)
03 Without stainless steel armor
with connector protector
05 Multiple Approvals

3300 NSv Proximity Probes

3300 NSv Probe
M10X1 thread
without armor
05 0.5 meter (20 in)
02 Miniature coaxial ClickLoc connector,
standard cable
00 Not required

3300 XL NSv Proximity Transducer

3300 NSv Probe
M8X1 thread
without armor
10 1.0 meter (39 in)
02 Miniature coaxial ClickLoc connector
standard cable
05 Multiple Approvals
Order in increments of 10 mm.
Length configuration:
Maximum unthreaded length:230 mm
Minimum unthreaded length:0 mm
Example:06 = 60 mm

Vibration Transmitter

10 0-10 mils pp (0-250 μm pp)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
00 Not required
Operating temperature
-35°C to +85°C(-31°F to +185°F)
Storage temperature
-52°C to +100°C(-62°F to +212°F).
Probe Cable 75Ω coaxial, 
fluoroethylenepropylene (FEP) insulated

NSv Proximitor Sensor

3300 NSv Probe
3/8-24 UNF thread
withoutarmor
5.0 metre (16.4 feet) systemlength
panel mount 
0 0 Not required

NSv Proximity Sensor

7.0 5.9 ± 0.9
Extension cabledc resistance
Center conductor: 0.220Ω/m (0.067 Ω/ft)
RecommendedGap Setting 1.0 mm (40 mils)
IncrementalScale Factor 7.87 V/mm (200 mV/mil)
OperatingTemperature-52°C to +177°C
StorageTemperature-52°C to +177°C (-62°F to+351°F)

System Rack

Holds All 3500 Monitor Modules 
Rack Power Supplies
Manufactured in (2) Sizes: 
Full-Size Rack and Mini-Rack
Manufactured in (3) Formats: 
Panel Mount, Rack Mount, and Bulkhead Mount
7 or 14 Rack Postitions

3300XL 8 mm Proximity Probe

5mm and 8mm Standard Mount Probe
nthreaded Length Option : 00 = 0.0 inches
Overall case length option : 08 = 0.8 inches
Total length option :10 = 1 metre. 
Connector option : 02 = With miniature male coaxial connector.
Diameter : 8mm
Configurations type and thread : Standard, 3/8-24
Lead Armor : No
Input power : -17.5 Vdc to -26 Vdc 
at 12 mA Max consumption.

3300 XL 11 mm Proximity Transducer

Probe Tip Diameter 11 mm
System Length 22 ft
Thread Size 3/8-24 UNF-2A
-51°C to +100°C (-60°F to +212°F)
0 to 4.0 mm (160 mils) linear range
7.87 mV/μm (200 mV/mil) nominal
Up to 90%, non-condensing

3300 XL NSv Proximity Transducer

3300 XL NSv (Narrow Side View)
Probe Tip Diameter 5 mm
System Length 20 ft
AISI 304 Stainless Steel
0 to 1.0 mm (40 mils) linear range
<0.2 μm (8 μin) under stable conditions
-34°C to +177°C (-30°F to +350°F)

VIBRATION MONITOR

VIBRATION MONITOR
SINGLE CHANNEL
ADJUSTABLE TIME DELAY ALARM
60MA
110VAC
50/60HZ

OUTPUT MODULE

IC694MDL741
OUTPUT MODULE
12/24 VDC
0.5 AMP
16 POINTS
NEGATIVE LOGIC

Standard Interconnect Cables

Cable length option in feet: -32 - 32 ft
Input : Accepts 1 non-contacting 3300 NSv Proximity Probe and extension cable.
Requires +12 to +35 Vdc input at the transmitter terminal.
Maximum Loop Resistance : 1,000 Ω including cable at 35 Vdc.
Conductors:2 twisted pairs, 22 AWG
Jacket:PUR (Polyurethane)
Capacitance:≤ 100 pF/m (typical).

3300 XL 8 mm Proximity Transducer

330104 3300 XL 8 mm Probe, 
M10 x 1 thread,with armor 
Minimum unthreaded length: 140 mm
Minimum case length: 190 mm
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector 
with connectorprotector, FluidLoc cable
00 Not required

Discrete Internal Barrier I/O Module

Discrete Internal Barrier I/OModule 
with InternalTerminations
16-channel digital I/O module
Intrinsically safe (IS) barriers integrated
24V DC logic
Redundant configuration possible
LED status indicators

Vibration Transmitter

Operatingtemperature-35°C to +85°C
Storagetemperature-52°C to +100°C
Power Requires +12 to +35 Vdc input atthe transmitter terminal
Frequencyresponse5 Hz to 6,000 Hz +0, 3 dB.
Minimumtarget size 9.5 mm (0.375 in) diameter.
NonHazardous,Zone 2 or Div 2Hazardousarea locationsPower Supply: 28 V

ARD DRIVE MODULE W/ FLOPPY DRIVE

Series: Fanuc 
Dimensions: Standard VME 6U Single Slot Form Factor
3.5-inch 1.44 MB Floppy Drive
Power consumption: Low Power
Number of Channels: 24
Inputs: 125 V dc, 15A
Input Impedance: 4-20 mA

Case ExpansionTransducer Systems

Input Power +24 Vdc, 30 mA minimum
24765-01 0.346 V/mm (8.79 V/in)
24765-01 20 Hz
24765-01 50 kΩ
Ripple < 1% full scale
Linearity ± 0.5% full-range
Stability 0.125% full-scale
OperatingTemperature-18 °C to +71 °C(0 °F to +160 °F)
StorageTemperature-54 °C to +93° C(-65 °F to +200 °F)

KJ2201X1-BA1 Logic Solver - SLS 1508