Series:POINT I/O
Module Type:Digital Contact Module
Series:POINT I/O
Outputs:4 N.O relay
Product Description Four (4) channel Relay output module
POINTBus Current 80 milliamps
No. of outputs Four (4) Normally Open (N.O.) contact outputs
Power Dissipation, Max;0.5 Watts
Output delay time, on to off, max:26 ms
Thermal Dissipation:1.7 BTU/hour
Contact resistance, initial:30 m
Thermal Dissipation:10 BTU/hour
Isolation Voltage:50 Volts Continuous
Inrush Current 6 amps for 10 milliseconds
Overvoltage Protection:Reverse Polarity
Power Supply Current:10 amps
Power Consumption:9.8 Watts
Field Power:24 Volts DC
Module Type;Expansion Power Supply
Series:POINT I/O
Part Number IC695ETM001
Specialty ModuleRX3i Ethernet module
10/100 Mbits 2 RJ45 connections one IP
address occupies one slot on system base
Current Consumption
840 mA @ 3.3 VDC; 614 mA @ 5 VDC
Operational NotesUniversal Backplane Only.
Uses PCI Bus. Client/Server
Number of Channels: 8 digital output channels
Output Voltage Range: 24 VDC ± 20%
Output Current: Maximum 1 A per channel
Power Supply Voltage: 24 VDC
Communication Interface:
Dual RBUS for high-speed data transfer
Power Supply Voltage:
10 to 28.8 VDC from SPBus
Operational Temperature Range: -15°C to +70°C
Storage Temperature Range: -25°C to +70°C
Relative Humidity: Up to 98%
Number of channels: 32 current inputs
Current input: 0-20 mA (input resistor 220 ohm)
Current accuracy: +/- 0.2% of full scale
(resistor accuracy = 0.1%)
Current input lter: RC = 33 µs
Digital resolution: 12 bits
Connectors: screw terminals, 2.5 mm
Input voltage: 24 VDC ±20%
Power consumption: maximum 20 W
Connectors: screw terminals, 1.5 mm
operational: 0° C to 70° C
storage: -25° C to 70° C
Power supply voltage: 10 to 28.8 VDC
SPBus connector: 9-pin male DSUB
Input voltage: 24 VDC ±20%
Power consumption: maximum 20 W
Connectors: screw terminals, 1.5 mm
operational: 0° C to 70° C
storage: -25° C to 70° C
Power supply voltage: 10 to 28.8 VDC
SPBus connector: 9-pin male DSUB
Input supply voltage: 24 VDC(+30%, -25%)
Nominal current consumption: ≈ 0.8 A
Start-up current: Max. 2.7 A
Power consumption: Max. 20 W
Heat dissipation: Max. 20 W
Voltage input range: 0-4 V, 0-10 V
Input resistor to ground: 3 MΩ
Current input range: 0-20 mA
Automatic protection: 26 m
AInput resistor to ground: 150 Ω ±1 %
Measurement accuracy: ±0.15% of full scale
Series: MAK 9
Voltage Rating: Typically24V DC.
Operating Temperature Range:
0°C and 60°C(32°F to 140°F)
Storage Temperature Range:
-20°C and 70°C (-4°F to 158°F)
Operating Voltage: 120/240 V AC
Input Power Frequency: 50/60 Hz
Input Voltage Range: 100–250 V AC
Operating Temperature Range:
Typically 0°C to 50°C (32°F to 122°F)
Storage Temperature Range:
-10°C to 60°C (14°F to 140°F)
Humidity Range:
10% to 90% relative humidity (non-condensing)
