ALL MANUFACTURERS

CONNECTION TERMINAL UNIT

Number of Channels: 16 connection points
Isolation: 250V AC
Rated Voltage: 250V AC/DC
Current Rating: 2A per channel 
Contact Resistance: <50mΩ 
Insulation Resistance: >100MΩ @ 500V DC
Dielectric Strength: 2000V AC (50Hz)

S8 RAM CHARGER MODULE

Governor Detection Board

Frequency range: 1Hz-20kHz
Input sensitivity: 50mV RMS minimum
Isolation: 1500V AC between channels
Analog Inputs:4-20mA position 
Control Outputs: 4-20mA governor control signal
Power Supply:24VDC nominal 
Accuracy: ±0.1% of reading ±1 RPM

TEACH PENDANT MAINBOARD

Operating Voltage: 24V DC
Power Consumption: <15W
Isolation: Opto-isolated I/O for safety signals
CPU: ARM-based microcontroller
Flash Memory: Stores firmware and configuration

Touchscreen panels

State-of-the-art graphics
Robust and reliable
Truly open platform
Display type:Touch
Display size 15.4"
Brightness:450 cd/m²
Display resolution, ratio:1280 x 800 (16:10)
Processor:ARM9 (1 GHz)
Main memory:1 GB

Power Control drive board

DC Bus Monitoring:0–1000V DC typical
Logic Side: +24V DC (±10%)
Gate Drive Side: +15V/-8V
Current Consumption:<500mA
Gate Drive: Peak 2A
Reinforced Isolation: 2500V AC
Working Voltage: 1000V DC

Control Panel

Intel Core i5/i7 processor (generation varies)
RAM: 8-32GB DDR4
Storage: 256GB-1TB SSD
Power Supply:100-240V AC, 50/60Hz
Role-based access control
Audit trail logging
Cyber security compliant

Enhanced Performance Quad Processor Pack (conformal coated)

24 V supply current: max. 25 mA
5 V supply voltage: 5 Vdc ± 5%
5 V supply current: max 1.2 A
Output supply voltage: 15—31 Vdc
Output resistance: approx. 1.1 kΩ
Short circuit proof: continuous
Voltage (high): 15—32 Vdc
Voltage (low): <4 V (reverse polarity protected)
Input current: approx. 8mA at 24 Vdc
Output current: 750mA per output

CURRENT TRANSDUCER CONTROL BOARD

Input Current Range:±10A (direct input)
Output Signal:4-20mA analog output
Analog Output: 4-20mA (load ≤500Ω)
Accuracy: ±0.5% of full scale
Bandwidth: 10kHz (-3dB point)
Isolation Voltage: 2500V AC

Cartridge U-high HART / Std. FET 300

Input Voltage: 24V DC
Power Consumption: ≤1.5W 
Isolation: 500V AC
Signal Conditioning:16-bit ADC resolution
Analog Input:4-20mA + HART
4-20mA loop drive: ≤500Ω 
Communication Speed: 1200 bps (FSK)
Multidrop Mode: Supports up to 15 devices

Power Supply Unit 24/5 Vdc, 16A (conformal coated)

Operating temperature:-5°C-+70°C (+23°F-+158°F)
Storage temperature: -40°C-+85°C (-40°F-+185°F)
Relative humidity: 10-95% (non condensing)
Approvals:CE, TUV, UL, CSA, FM
24 V supply voltage: 24 V DC -15%-+30%
24 V supply current: 
< 6 A at 24 Vin (16 A load)
< 7 A at 20.4 Vin (16 A load)
Inrush current: < 5 A at 24 Vin
Hold-up time: < 1ms

Safety Manager System Module

5 V supply voltage:  5 V DC ± 5%
5 V supply currentLmax 1.2A
Operating temperature: 
-5°C - +70°C (+23°F - +158°F)
Storage temperature: 
-40°C - +85°C (-40°F - +185°F)
Relative humidity: 10 - 95% (non condensing)

SPEED TRANSDUCER MODULE

Magnetic pickup (MPU) or proximity probe
Frequency range: 1Hz to 10kHz
Input sensitivity: 50mV RMS minimum
Accuracy: ±0.1% of reading ±1 RPM
Analog Output:4-20mA
Load capacity: ≤500Ω
Power Supply:24V DC ±10% (standard)

Analog Output Slave Module

Supply Voltage:24V DC (±10%)
Power Consumption:≤5W (typical)
Load Capacity:4–20mA: ≤750Ω
Channels: 4 or 8 isolated
Current: 4–20mA (sink/source)
Voltage: 0–10V, ±10V
Resolution: 16-bit
Channel-to-Channel: 250V AC
Field-to-System: 1500V AC

Trusted CCoat TMR Processor Module

Backplane (IMB) Supply:20 Vdc to 32 Vdc
Power Dissipation:30 W
Maximum Application Size:960 KB
SOE Buffer:1000 events
Operating Temperature:0 °C to 60 °C (+32 °F to +140 °F)
Storage Temperature: -25 °C to 70 °C (-13 °F to +158 °F)