

























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
PROCESS XT CONTROLLER
1756 ControlLogix
Supply voltage DC 5.1 V
Voltage type of supply voltage DC
Redundancy Yes
Interface Module
CONTROLLOGIX
CONTROLNET
128 CONNECTION
REDUNDANT COAXIAL MEDIA
2 CONTROLNET BNC CONNECTORS
USB NETWORK ACCESSPOINT
-25 TO +70 DEGREE C
PROGRAMMABLE CONTROLLER MODULE
PROGRAMMABLE CONTROLLER MODULE
CONTROLLOGIX 5580
3 MB USER MEMORY
2 GB SD CARD MEMORY
100 ETHERNET/IP NODE CAPACITY
1 USB PORT
1 ETHERNET/IP PORT
1200 MA AT 5.1 VDC/5 MA AT 1.2 VDC
0 TO 60 DEGREE C OPERATING TEMPERATURE
Redundant Power Supply
POWER SUPPLY BUNDLE
CONTROLLOGIX
19-32 VDC INPUT
5 VDC AT 13 AMP OUTPUT
2 REDUNDANT SUPPLIES
WITH 2 CABLES AND CHASSIS ADAPTOR
PROGRAMMABLE SAFETY CONTROLLER
1756L82ES
PROGRAMMABLE SAFETY CONTROLLER
GUARDLOGIX 5580
5 MB STANDARD MEMORY
2.5 MB SAFETY MEMORY
175 ETHERNET/IP NODE CAPACITY
1 USB 2.0 PORT
1 ETHERNET/IP PORT (10/100 MBPS/1 GB SPEED)
0 TO 60 DEGREE C OPERATING TEMPERATURE
COMMUNICATION INTERFACE MODULE
1771ACN15
COMMUNICATION INTERFACE MODULE
1 PORT CONTROLNET
SINGLE-PORT NON-REDUNDANT MEDIA
CONTROLNET 1.5 AND BEYOND
1 AMP
5 VDC
SYNCHLINK BASE BLOCK
1751SLBA
SYNCHLINK BASE BLOCK
CONVERTS SYNCHLINK TO ELECTRICAL SIGNALS
TO INTERFACE UP TO 4 FIBER 4-PORT SPLITTER BLOCKS
1.2 AMP
600 MA
24 VDC
OPEN STYLE
MOUNTABLE
Digital output module
1769OG16
OUTPUT MODULE
COMPACTLOGIX
DC DIGITAL
4.5-5.5VDC
TTL OUTPUT
16 POINT
16 CURRENT SINKING (LOW TRUE) POINT
SynchLink Block
1751SL4SP
SYNCHLINK
4 PORT SPLITTER BLOCK
CONVERTS ELECTRICAL
SIGNALS FROM SYNCHLINK BASE
BLOCK TO 4 FIBER
OPTIC
PORTS
Expansion Relay Module
1444RELX0004RB
EXPANSION RELAY MODULE
4 SINGLE POLE DOUBLE THROW RELAYS
CONNECT UP TO THREE TO
ONE 1444-DYN04-01RA
DYNAMIC MEASUREMENTMODULE.
REQUIRES 1444-TB-B BASE
AND 1444-REL-RPC- CONNECTOR SET
IGCT BOARD
8002604402R
IGCT BOARD
2300/4160/3300V
PC BOARD
CONTROL BOARD
PCB BOARD ASSEMBLY
MOUNTABLE
OUTPUT MODULE
OUTPUT MODULE
POINT I/O
DIGITAL
DC
4 POINTS SINKING 24 VDC OUTPUT
ELECTRONICALLY PROTECTED
OPEN STYLE
DIN MOUNTED
Stratix Managed Switches
UNMANAGED ETHERNET SWITCH
STRATIX 2000 3+1 PORT
3-PORT 10/100 MBPS COPPER
(FULL OR HALF DUPLEX)
AND 1-PORT 100BASE-FX MULTIMODE FIBER
(LC CONNECTOR)
UNMANAGED
20V AC/ 24V DC POWER
MicroLogix 1500 Base Unit
I/O Rating:2 inputs/ 12 outputs
No. of Inputs:12 inputs
Input Voltage:120 Volts AC
Input channel Voltage:120 VAC
Output Source Relay:Port
No. of Outputs:12 outputs
Max Expanded I/O Count:512
Output channel Voltage:24-125VDC; 120-240VAC
Power Supply Voltage:85-265 VAC
Analog Combination Module
Product Type:nalog Combination Module
Product Series:Distributed I/O
Analog Inputs:8
Operating Voltage:24V DC
Response Time:20 ms
Current Consumption:0.8 A max.
Input Resolution:12 bits
Terminal Block Torque:0.51 Nm
Analog Outputs:4
ControlLogix Integrated Motion module
Gain Resolution:32- bit floating point
Servo output Type:Analog Voltage
Voltage Range:±10V dc
Analog output resolution 16 bits
Discrete outputs:Solid-state isolated relay contacts
Discrete output operating voltage:24VDC, Nominal.
Axes per Module:2
Axes per Controller:32
Backplane Current (5Volts):700 milliamps
Backplane Current (24Volts):2.5 milliamps
ControlLogix Discrete output module
Outputs:8
Module Type:Digital AC Output Module
Voltage:120-240 Volts AC
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Current per point:0.5 A @ 60 °C (140 °F)
Current per group, max:2 A @ 60 °C (140 °F)
Backplane Current at 5 Volts:200 mA
Isolation Voltage:50 Volts Continuous
Power Dissipation:(Max) 5.1 W @ 60 °C (140 °F)
Backplane Current at 24 Volts:2 mA
SIL 3 PLe Safety Partner
PLC CONTROLLER
GUARDLOGIX
SAFETY PARTNER
EXTREME ENVIRONMENT
CHASSIS MOUNT
-25 TO 70 DEGREES C
ControlLogix Processor Module
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts DC):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
GuardLogix Controller
Series:ControlLogix
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:4 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
ControlLogix Processor Module
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:2 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
GuardLogix Controller
Series:ControlLogix
Module Type:GuardLogix Controller
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):802 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
Armor ControlLogix Controller
Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC
Enclosure Type:UL Type 4/4x
ControlLogix Jumper Bars
BAR JUMPER
CONTROLLOGIX
FOR 36 PIN TERMINAL WIRING BLOCKS
25 PER PACKAGE
Digital Isolated Input Module
Series:ControlLogix
Inputs:16 Individually Isolated; SOE
Input Voltage:125 Volts DC Sink-Source
Operating Voltage Range:90-140 Volts DC
Maximum Input Current, Off-State:0.3 milliamps
Power Dissipation (Max):5.5 Watts at 60 degrees Celsius
Module Type:Digital Isolated Input Module Series of Events

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.