
Seismic Transmitter
00 0 – 12.7 mm/s (0 – 0.5 in/s)
01 10 Hz to 1 kHz (600 to 60 kcps)
RMS(Root Mean Square)
05 Multiple Approvals (CSA/NRTL/C,ATEX/IECEx)
ElectricalIsolationGreater than 108 ohms
Connector3-pin MIL-C-5015, 316L stainlesssteel
Accelerometers
0 1 ¼-28 UNF integral stud
0 0 None
InputVoltage -24 ± 0.5 Vdc.
Bias Current 2 mA nominal.
Output BiasVoltage: -8.5 ± 0.5 Vdc.
3300 XL 11 mm Probe
3300 XL 11 mm Probe
1/2-20 UNFthread
without armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
05 Multiple Approvals
Order in increments of 0.1 in
Threaded length configurations:
Maximum case length: 9.9 in
Minimum case length: 1.0 in
Example: 2 4 = 2.4 in
Interconnect Cable
Product Type : Interconnect Cable
Model : 16710 - TEIP11-PS I/P Converter, signal converter for standard signals, with power stage
Cable Length Option : 20 - 20 ft
3300 XL 8 mm Proximity Probes
3300 XL 8 mm Probe
M10 x 1 thread
without armor
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLoc
connector, standard cable
00 Not required
Probe Proximity Vibration
Proximity Vibration Probe
±0.25 mm to ±10 mm
Standard 4-wire or 2-wire
-40°C to +120°C
4-20 mA
3300 XL 11 mm Extension Cable
080 8.0 meters (26.2 feet)
01 Armored cable
05 Multiple Approvals
Outputresistance50 Ω
3300 XL 8 mm Proximity
Tip Diameter: 8 mm
Cable Length: 130 inches (10.8 feet)
Measurement Range: Up to 2 mm (80 mils)
Linear Range: 0.25–2.0 mm (10–80 mils)
Output Sensitivity: -7.87 V/mm (-200 mV/mil)
Frequency Response: 0–10 kHz
16710 Interconnect Cables
3-conductor shielded
22 AWG (0.5 mm2)
armored cable with 3- socket plug at one end,
terminal lugs at the other end
Minimum length of 3.0 ft (0.9 m),
maximum length of 99 ft (30 m).
Cable Length Option in feet : 35 = 35ft
3300 NSv Extension Cable
060 6.0 meters (19.7 feet)
04With stainless steel armor
withFEP jacket
with connectorprotector
05 Multiple Approvals
Interconnect Cable
Impedance: Probable 50 Ohms
Voltage Rating: ≤30 V DC
Operating Temperature: -40°C to +85°C
Shielding: Dual-layer (foil + braided shield) for robust EMI/RFI protection
Bend Radius: ≥10x cable diameter
3300 XL Standard Extension Cable
01 With stainless steel armor, withFEP jacket
00 Not Required