PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE 90-30 Series PLC
- IC693CPU374-GS
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC693CPU374-GS CPU 374 Ethernet controller
GE IC693CPU374-GS is a Series 90-30 controller with a 133 MHz processor, 240 KB of user memory and embedded Ethernet connectivity. Its two switched 10/100Base-TX ports connect the controller to the Ethernet network.
The CPU supports SRTP and Ethernet Global Data communications together with RAM and flash storage. It supports up to eight baseplates and requires 7.4 W from the 5 V DC supply, with a documented operating range of 0 to 60 degrees C.
The CPU supports SRTP and Ethernet Global Data communications together with RAM and flash storage. It supports up to eight baseplates and requires 7.4 W from the 5 V DC supply, with a documented operating range of 0 to 60 degrees C.
BEFORE YOU BUY
Confirm the complete cpu 374 ethernet controller
ACTUAL APPLICATIONS
Application context for IC693CPU374-GS
IC693CPU374-GS supports compatible Series 90-30 installations across the application categories below, subject to system configuration.
-
01 · OIL & GAS
Petroleum Exploration and Natural Gas Transmission
Offshore Petroleum DevelopmentCross-Regional Gas Transmission -
02 · POWER GENERATION
Thermal Electricity and Hydroelectric Power Generation
Combined-Cycle Power GenerationPumped-Storage Hydropower -
03 · CHEMICAL & PETROCHEMICAL
Basic Chemicals and Specialty Chemical Manufacturing
Petrochemical ManufacturingFine Chemical Manufacturing
Technical specifications for IC693CPU374-GS
-
Product ModelIC693CPU374-GS
-
Product ParametersCPU 374 Ethernet controller
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Processor speed133 MHz
-
User memory240 KB
-
Typical Boolean scan0.15 ms per 1K logic
-
Discrete I/O4,096 points
-
Analog inputs2,048 words
-
Analog outputs512 words
-
Ethernet portsTwo switched 10/100Base-TX
-
Ethernet protocolsSRTP and Ethernet Global Data
-
Baseplates8 maximum
-
Power requirement7.4 W from 5 V DC
-
Memory storageRAM and flash
-
Operating temperature0 to 60 deg C
-
Programming supportVersaPro 2.03 or later
View all additional
Alternative Names
IC693CPU374-GS
Series 90-30 CPU 374 Ethernet controller
90-30 133 MHz processor speed
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC693CPU374-GS cpu 374 ethernet controller
IC693CPU374-GS provides the documented function of a CPU 374 Ethernet controller in the Series 90-30 platform. Match the complete article and revision with the host architecture before engineering approval.
Review processor speed (133 MHz), user memory (240 KB) and typical boolean scan (0.15 ms per 1K logic) against the electrical and functional design.
Apply the documented connection and supply limits, validate discrete i/o (4,096 points) and retain the completed test record with the system documentation.
Features:
- Confirm processor speed: 133 MHz
- Match user memory: 240 KB
- Validate typical boolean scan: 0.15 ms per 1K logic
The IC693CPU374-GS cpu 374 ethernet controller requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC693CPU374-GS cpu 374 ethernet controller
Record the full IC693CPU374-GS identity, installed revision, wiring and configuration before removal. Isolate the applicable power and field circuits under the site maintenance procedure.
Compare the replacement article's analog inputs (2,048 words) and analog outputs (512 words) with the removed unit and purchase record.
After installation, inspect connection integrity, confirm ethernet ports (Two switched 10/100Base-TX) and verify ethernet protocols (SRTP and Ethernet Global Data) before return to service.
Features:
- Record analog inputs: 2,048 words
- Inspect analog outputs: 512 words
- Test ethernet protocols: SRTP and Ethernet Global Data
The IC693CPU374-GS cpu 374 ethernet controller requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC693CPU374-GS cpu 374 ethernet controller must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.1 x 13.0 x 13.5 cm
-
Shipping weight0.59 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC693CPU374-GS
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are the two IC693CPU374-GS Ethernet connectors separate IP interfaces?
The IC693CPU374-GS specification identifies two switched 10/100Base-TX ports. Treat the embedded switch arrangement according to the CPU374 network documentation. -
Can IC693CPU374-GS exchange Ethernet Global Data?
IC693CPU374-GS supports Ethernet Global Data and SRTP. Reconcile producer/consumer definitions and peer addressing with the restored project. -
Will a CPU350 program always fit unchanged in IC693CPU374-GS?
IC693CPU374-GS provides 240 KB of user memory and different CPU374 capabilities. Check project conversion, hardware configuration and communication definitions rather than assuming an unchanged transfer. -
Which programming software baseline is documented for IC693CPU374-GS?
The source lists VersaPro 2.03 or later for IC693CPU374-GS. Confirm the tool version and project format before attempting a download. -
What power allowance is required for IC693CPU374-GS?
IC693CPU374-GS requires 7.4 W from the 5 V DC supply. Include that requirement in the complete Series 90-30 rack budget. -
What must be tested after restoring the GS-suffix IC693CPU374-GS?
Verify program execution, Ethernet peer connections, EGD exchanges and the configured I/O on IC693CPU374-GS before releasing the controller to service. -
What network records improve a IC693CPU374-GS spare-parts request?
Send the exact IC693CPU374-GS label, project/tool version, IP settings and EGD peer definitions with the quantity required for procurement. -
Which port checks belong in IC693CPU374-GS arrival inspection?
Check both Ethernet sockets and their physical condition on IC693CPU374-GS, reconcile the GS label and confirm the ordered CPU374 hardware before loading the application.
READY TO VERIFY YOUR PART?
Get a IC693CPU374-GS quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC693CPU374-GSCPU 374 Ethernet controllerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
