Honeywell

POWER SUPPLY MODULE

CPU MODULE
6144 POINT
4M MEMORY
MASTERLOGIC-200

CPU MODULE

CPU MODULE
MASTERLOGIC-200
128 K STEP
16MB BUILT IN FLASH MEMORY
2MB DATA MEMORY
7MB PROGRAM MEMORY

Safe loop-monitored digital output module

Ability to de-energizel 
Ability to de-energize via secondary meansl 
Cross talk between outputsl 
Function of the suppression diodesl 
Lead breakage in the (external) output wiringl 
Short circuit of the outputs

Interconnection Cable

Length:10 meters
Shielding:Dual/triple shielding 
Wire Gauge:22-24 AWG 
Voltage Rating:300V AC/DC 

Interconnection Cable

Direct connection between two 
FS-CP series process controllers
10 meters long
Shielded twisted pair design
Easy to install and use
Hot-pluggable

IKB keyboard

KB GUS W/TRKBAL
Integrated into GUS console
workstation docking
Temperature Range:0°C to +50°C operational
Trackball Resolution:High-precision
Legacy RS-232 or proprietary protocols

Horizontal IO bus transfer board

Voltage: 24 V DC (±10%)
Power Consumption: ≤10 W (typical)
Isolation: 1500 V AC
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -50°C to +85°C (-58°F to +185°F)
Humidity: 5–95% RH (non-condensing)

I/O Extender Module

Space requirements:4 TE, 3 HE (= 4 HP, 3U)
current: max. 10 mA (WD1in + WD2in)
Number of outputs:18 
power requirements:100 mA
current: + 5V_load of all (18) IO boards
+ WD_load of all (18) IO boards
voltage drop:0.2V < V < 0.8V

Universal Input Output Module

Fast Scan (Priority I/O Module Scan)
Electronic short circuit protection
Safe-state (FAILOPT) behaviors configurable 
on aper channel basis for Digital / Analog Output
HART 7 support (analog IO)
Extended Temperature Range -40 to +70°Cmodule ambient

Redundant Power Supply

Primary/Secondary Inputs: Dual 24 V DC (±20% range)
Voltage: 24 V DC (regulated, ±1%)
Per Module: 5 A continuous (10 A peak)
Redundant Capacity: 15 A total
Efficiency: ≥85% (typical load)
Ripple/Noise: <100 mV peak-to-peak

I/O SCANNER

900S75S0460
I/O SCANNER
2 PORT
1 PER I/O RACK
Input Voltage: 24 V DC (±10%)
Current Consumption: ≤100 mA
Power Isolation: 1500 V AC

POWER STATUS MODULE

900PSM0200
POWER STATUS MODULE. 5 VDC
22 MA MAX
Operating Voltage: 5 V DC (±10%)
Power SupplyLoading:5V; 22mA max
Current Consumption: ≤22 mA (max)

TEMP CONTROLLER

Relay:SPDT, rated 5 A @ 250 V AC
Solid-State Relay (SSR) Driver:12 V DC, 30 mA
Analog Output:0–10 V DC or 4–20 mA
Accuracy: ±0.2% of full scale 
Display Type: Backlit LED or LCD
Voltage: 100–240 V AC
Power Consumption: ≤ 5 W

Digital Input Module

Extensive internal diagnostics for data integrity
NO Open wire detection
Optional redundancy
On board excitation power
Supplies Non-incendive field power 
Direct / Reverse Input Indication
Galvanic isolation
Internal or external field power selection

Digital Output Module

Output Channels:32
Load Voltage:30 VDC Maximum
Load Current :0.1 A per channel 
Galvanic Isolation :1000 VAC RMS for System3
Off-State Voltage:24 V
Off-State Leak Current:100 µA (max)
Turn-On/Turn-Off Time:10 ms (max)

Hpm I/o Link Pc Board

I/O Type:Digital or analog I/O
Voltage Range:24 VDC (±10%)
Isolation:1500 VAC typical
Environmental Rating:Operates in -40°C to +70°C

Control Processor module

5 VR supplyvoltage:5 V DC ± 10%
5 VR supplycurrent:Max. 10 mA
Output supplyvoltage:14-31 V DC
Make: SAFT
Type2: LS14500CFG
Material: Lithium Thiony Chloride
Voltage: Nominal 3.6 V
Capacity: > 2 Ah

Power Supply Unit

Operating temperature:-5°C-+70°C (+23°F-+158°F)
Storage temperature: -40°C-+85°C (-40°F-+185°F)
Relative humidity: 10-95% (non condensing)
Approvals:CE, TUV, UL, CSA, FM
24 V supply voltage: 24 V DC -15%-+30%
24 V supply current: 
< 6 A at 24 Vin (16 A load)
< 7 A at 20.4 Vin (16 A load)
Inrush current: < 5 A at 24 Vin
Hold-up time: < 1ms

Universal Safety Interface

UNIVERSAL SAFETY INTERFACE 
MMEM CC, EUCN
Approvals: CE, TUV, UL, CSA, FM
5 V supply voltage: 5 V DC ± 5%
5 V supply current: max 1.2A
Operating temperature:-5°C - +70°C (+23°F - +158°F)
Storage temperature: -40°C - +85°C (-40°F - +185°F)
Relative humidity: 10 - 95% (non condensing)

Analog Input Module

Input Type Current (2-wire or self-powered transmitters)
Input Channels 16 Channels (16 Single Ended)
Common Mode Rejection Ratio, dc to 60 Hz 70 dB
A/D Converter Resolution 16 bits
Input Range 4-20 mA (through 200 Ω)
Normal Mode Rejection Ratio, at 60 Hz 20 dB
Normal Mode Filter Response Single-pole RC, -3 dB @ 6.0 Hz
Maximum Normal Mode Input ± 30 Volts

Hlai/sti galvanic isolator module

Description : HLAI/STI FTA, GI/IS MC-GAIH13
CE compliant, conformally coated
Redundancy
Channels : 16
Galvanically Isolated
Terminals : Compression
Size B : 12 inches (307 mm)

Analog Input Module

Inputs per module:8 (isolated)
Input types:mV, V, T/C, RTD, ohms, mA
A/D Converter:One per module
A/D Resolution:15 Bits
Update rate:500ms
Long term Stability:0.1% per year

Digital Input Module

Inputs per module:16 (sinking)
Input Voltage Range:10 VDC to 32 VDC
Peak Voltage;32 VDC
AC Frequency:N/A
Minimum ON Current:1.0 mA
Maximum OFF Current:0.7 mA
OFF to ON response time:4 ms max
ON to OFF response time:4 ms max

PROBE LOW TEMP 20FT PH

Measuring Range: 0–14 pH.
Process Fluid: 0°C to 50°C (32°F to 122°F)
Response Time: ≤30 seconds
Cable: 20 feet shielded, UV-resistant
Pressure Rating: ≤5 bar (72.5 psi) 
Calibration: 2–3 point calibration

Analog Input Module

ANALOG CARD
0(4)-20 MA INPUT
16 CHANNEL
24 VDC SUPPLY
CARD MOUNT