PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Fifteen paired DC supply branches with fuse-failure monitoring
ICS Triplex T8293C belongs to the Trusted fifteen-way fused power distribution family. It routes two incoming DC feeders through separate fuse banks to paired output connections for field termination assemblies or other equipment. The feeders share a common zero-volt reference.
Each outgoing circuit has fused redundant supply paths, with LEDs indicating input power and individual fuse failure. A volt-free relay contact provides a common fuse alarm, and a selection link accommodates the documented 24 V DC or 48 V DC supply arrangement.
Each outgoing circuit has fused redundant supply paths, with LEDs indicating input power and individual fuse failure. A volt-free relay contact provides a common fuse alarm, and a selection link accommodates the documented 24 V DC or 48 V DC supply arrangement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T8293C Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · CHEMICAL PROCESSING
Chemical Processing Plants and Bulk Material Production Facilities
Chemical processing plants with mixing equipment and reaction vessels.Bulk material production facilities with storage and transfer operations. -
02 · WATER & WASTEWATER
Drinking Water Production and Municipal Wastewater Treatment Facilities
Drinking water production sites with filtration and dosing equipment.Municipal wastewater facilities with sewage pumps and sludge processing. -
03 · POWER GENERATION
Electricity Generating Plants and Station Auxiliary Service Areas
Electricity generating plants with turbine auxiliaries and fuel equipment.Station auxiliary service areas with cooling and water treatment.
Technical specifications for T8293C
-
Product ModelT8293C
-
Product ParametersTrusted fused power distributor
-
ManufacturerICS Triplex
-
Distribution capacity15 paired outputs supplied through 2 banks of 15 fuses
-
Nominal supply selection24 Vdc or 48 Vdc, link selected; exact operating limits require revision check
-
Maximum supply current23 A; output fuse values are not additive capacity
-
Supply referenceCommon 0 V reference for both feeders
-
Status indicators2 green feeder-health LEDs and 30 red fuse-failure LEDs
-
Common alarm behaviorVolt-free relay contact opens on fuse failure
-
Alarm contact switching voltage60 Vdc or 125 Vac maximum; not the DC input range
-
Alarm contact switching current0.5 A maximum
-
Mounting arrangementTS32 or TS35 DIN rail; horizontal or vertical
-
Operating temperature0 to +60 degrees C
-
Non-operating temperature-25 to +70 degrees C
-
Relative humidity10-95%, noncondensing; operation, storage and transport
-
Equipment dimensions79 x 285 x 109 mm (H x W x D)
-
Equipment mass576 g; not packaged or shipping gross weight
View all additional
Alternative Names
T8293C Trusted fused power distributor
ICS Triplex T8293C fifteen-way fused DC distribution
T8293C Trusted dual-feed field power distribution assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRUSTED EQUIPMENT
Match T8293C to the documented Trusted configuration
T8293C supplies paired field-power branches from two DC feeders sharing a zero-volt reference. It provides fuse monitoring rather than DC conversion. Voltage limits and fuse characteristics differ between the legacy manual and current catalogue, so the actual revision must be checked.
Confirm nominal 24 V or 48 V mode and applicable voltage limits. Resolve the official fast-blow versus T-characteristic difference before replacement.
Obtain applicable TN20059 guidance from the manufacturer; its full text was not publicly accessible.
Features:
- Fifteen paired fused output circuits
- Two banks of fifteen protective fuses
- Individual fuse-failure status indicators
The ICS Triplex T8293C trusted fused power distributor requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T8293C identity and compare its hardware revision with the installed item. Match T8293C, the voltage-selection link, supplied revision and approved fuse specification. Resolve the conflicting official voltage and fuse data before installation. Nominal voltage and physical fuse size alone do not establish replacement suitability.
Confirm nominal 24 V or 48 V mode and applicable voltage limits. Obtain applicable TN20059 guidance from the manufacturer; its full text was not publicly accessible.
Use the controlled manufacturer procedure and the approved maintenance plan. A red indicator identifies an associated fuse failure and the common alarm contact opens. Investigate the underlying circuit before fitting a manufacturer-approved replacement fuse.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T8293C trusted fused power distributor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T8293C trusted fused power distributor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109090
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T8293C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are there fifteen outputs or thirty independent circuits?
The manufacturer describes fifteen paired output circuits supplied through two banks of fifteen fuses. The thirty fuse positions serve the paired distribution arrangement, with the two feeders sharing a common zero-volt reference. -
Does the voltage-selection link convert the incoming supply?
No. It selects the documented nominal 24 Vdc or 48 Vdc operating configuration. The unit distributes existing DC power; it is not a voltage converter, and its selected mode must match the approved supply. -
Which voltage limits are confirmed for a supplied unit?
They must be checked against its revision. RM262 Issue 10 lists 22-30 or 43-60 Vdc, whereas PC002G lists 20-32 or 34-60 Vdc. Neither range is assigned here as an unconditional supplied-unit rating. -
Can any 3.15 A fuse of the correct size be used?
No. The legacy manual specifies fast-blow fuses, while the current catalogue specifies 3.15 A T fuses. The time-current characteristic matters. Confirm the approved replacement for the actual hardware rather than matching only size and current. -
Can all fuse ratings be added to determine capacity?
No. The documented maximum supply current is 23 A. Thirty fuse positions do not establish an aggregate capacity obtained by adding individual fuse values; feeder, connector, cable and downstream limits also apply. -
How is a fuse failure reported?
Thirty red indicators identify individual fuse failures and two green indicators show feeder health. A volt-free common alarm contact opens on a fuse failure. Its 0.5 A switching limit is separate from the power distribution rating. -
Has the manufacturer technical notice been checked in full?
The official support entry TN20059, dated 13 December 2007, exists for the fuse distribution unit, but its full content requires sign-in and was not reviewed. Obtain revision-applicable guidance from the manufacturer before service; no affected-unit or remediation claim is made. -
What does the C suffix establish?
PC002G explicitly permits a C suffix for T8xxx catalogue numbers. It does not independently prove the supplied board revision, installed fuse type or certification. Retain the complete model and verify those details separately.
READY TO VERIFY YOUR PART?
Get a T8293C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
