PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SZ-VH1 SZ-V standard safety laser scanner head
KEYENCE SZ-VH1 is the standard scanner head for the SZ-V Series safety laser scanner system. KEYENCE lists the exact model as a standard type scanner head with an approximate weight of 1,600 g.
The scanner head must be combined with a compatible SZ-V display/controller unit and installed according to the official safety instructions. Verify the complete system model, protective field design, mounting position, cabling and validation records before commissioning.
The scanner head must be combined with a compatible SZ-V display/controller unit and installed according to the official safety instructions. Verify the complete system model, protective field design, mounting position, cabling and validation records before commissioning.
BEFORE YOU BUY
Check the complete SZ-V safety system
ACTUAL APPLICATIONS
SZ-VH1 supports safeguarding around hazardous machinery
Use the SZ-VH1 head as part of a validated SZ-V safety laser scanner system. The protective field, machine stopping performance, mounting and controller configuration must be engineered for the actual machine.
-
01 · AREA GUARDING
Monitor access to hazardous areas
Configure the safety scanner system to detect entry into a defined protective field around automated equipment. Validate the field against the machine stopping distance. -
02 · ROBOT CELL ACCESS
Protect open robot-cell approaches
Install the scanner head where physical guarding includes an open access path. Confirm blind zones, reflections and restart interlocking during validation. -
03 · MOBILE EQUIPMENT
Support collision-risk detection
Use the scanner head in a compatible mobile or transfer system to monitor travel zones. Verify vibration, mounting rigidity and the complete safety-control response.
Technical specifications for SZ-VH1
-
Product ModelSZ-VH1
-
Product ParametersSafety laser scanner head
-
In stock1 unit
-
ManufacturerKEYENCE
-
Product SeriesSZ-V Series
-
Head TypeStandard type
-
Camera FunctionNot included
-
Detection CapabilityDiameter 20, 30, 40, 50, 70, or 150 mm
-
Detectable Angle190° (-5° to 185°)
-
Maximum Protection Zone8.4 m
-
Maximum Warning Zone26 m
-
Laser Wavelength905 nm
-
Laser ClassClass 1
-
Enclosure RatingIP65
-
Operating Temperature-10 to +50°C
-
Operating Humidity35% to 85% RH
-
Storage Temperature-25 to +60°C
-
Vibration Resistance10 to 55 Hz, 0.7 mm compound amplitude
-
Shock Resistance100 m/s², 16 ms pulse
View all additional
Alternative Names
SZVH1
SZ VH1
SZ-V Series standard scanner head
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SAFETY SCANNER INTEGRATION
Validate the complete SZ-V safety system
KEYENCE SZ-VH1 is the standard scanner head for the SZ-V Series safety laser scanner system. It does not include the camera function and must be matched to the applicable SZ-V display or controller, cables and mounting hardware.
Integration depends on the engineered protective and warning fields, selected detection capability, installation position and machine stopping distance. Confirm the 190° detectable angle and all environmental limits against the application.
After mounting and configuration, test every field, restart interlock, fault response and stopping function before returning the machine to service. Record the validated configuration with the machine documentation.
Features:
- Exact scanner head: SZ-VH1
- Protection zone: up to 8.4 m
- Warning zone: up to 26 m
The KEYENCE SZ-VH1 scanner head requires the complete SZ-V configuration, mounting and protective-field design to be confirmed before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete scanner-head identity before replacement
KEYENCE SZ-VH1 should be replaced with the same standard SZ-V Series scanner head when the installed system documentation specifies this exact model.
Before replacement, verify the display or controller, cables, mounting hardware, protective-field configuration, selected detection capability and safety validation records. Inspect the optical window and all connectors before installation.
Do not treat the camera-equipped SZ-VH1X or another SZ-V head as a direct substitute. Different models can change camera capability, system compatibility and the validated machine configuration.
Features:
- Match the exact SZ-VH1 model
- Confirm the standard non-camera head
- Revalidate every protective field
The KEYENCE SZ-VH1 requires replacement verification based on the complete system, mounting, configuration and safety validation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, configuration data, software and certificates are included only when listed in the quotation.
Features:
- Official SZ-VH1 product references are checked before order
- Confirm the complete SZ-V configuration in current instructions
- Accessories are supplied only when listed in the quotation
Documentation for the KEYENCE SZ-VH1 scanner head must be matched to the complete SZ-V safety system; confirm manual availability in the written quotation.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.3 × 13 × 12.5 cm
-
Shipping weight1.6 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536508090
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SZ-VH1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the primary function of KEYENCE SZ-VH1?
SZ-VH1 is a standard scanner head used in a compatible SZ-V safety laser scanner system to monitor configured protective and warning fields. -
Does KEYENCE SZ-VH1 include a camera?
No. KEYENCE identifies SZ-VH1 as the standard type without the camera function; confirm the complete model before ordering. -
What protection and warning ranges can the SZ-V Series support?
The series supports a maximum protection zone of 8.4 m and a maximum warning zone of 26 m; the final field design must be validated for the machine. -
What should be checked when replacing an SZ-VH1?
Match the exact scanner head, compatible display or controller, cables, mounting hardware, configuration and safety validation records. -
What installation envelope should be allowed for SZ-VH1?
The official drawing shows an overall product envelope of about 143 × 130 × 125 mm; verify all drawing notes and bracket clearances. -
What environmental limits apply to SZ-VH1?
KEYENCE specifies IP65, an operating range of -10 to +50°C and operating humidity of 35% to 85% RH. -
What must be tested before returning the system to service?
Test each configured field, the selected object-detection setting, machine stopping performance, restart interlocking and fault response. -
What information is needed for an SZ-VH1 quotation?
Send the full SZ-VH1 model, label photos, required quantity, system components, condition requirement and destination.
READY TO VERIFY YOUR PART?
Get a SZ-VH1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
