Siemens

CLOSED-LOOP CTRL MODULE

SIMATIC S5-135/155, 
CLOSED-LOOP CTRL MODULE 
IP 260
FOR SIMATIC S5-PLC

Digital Output Module

SIMATIC S5
Digital output 453 
Isolated Compact design U 
16 x Outputs 24 V DC; 2A

Slot module

SIMATIC S5 
CP 581 
AT SLOT MODULE 
FOR CP 581 
AND CP 581/486

Analog Input Module

SIMATIC S5
Analog input 460 
Isolated Measuring range 
modules 8 inputs 
Compact design U

Communication Processor

SIMATIC S5
CP 544
Communication Processor
for point-to-point connections
(serial data connection) 
for S5-115U/H-135U-155U/H

CENTRAL PROCESSING UNIT

SIMATIC S5
CPU 948R
CENTRAL PROCESSING UNIT 
FOR S5-155H
1600 KB RAM

CENTRAL PROCESSING UNIT

SIMATIC S5
CPU 948RL 
CENTRAL PROCESSING UNIT 
FOR S5-155H
LITE VERION
128 KB RAM

Processor Module

SIMATIC S5
CPU 948R 
CENTRAL PROCESSINGUNIT 
FOR S5-155H
1664 KB RAM

BUS TERMINAL

SIMATIC NET
RS 485 BUS TERMINAL 
FOR PROFIBUSTRANSMISSION 
RATE: 9.6 KBIT/S TO 1500 KBIT/S 
WITHCONNECTING CABLE 1.5 M

TRANSMISSION RATE

12M BUS 
TERMINAL FOR PROFIBUS
TRANSMISSION RATE 
9.6KBIT/S TO 12 MBIT/S
CONNECTING CABLE 1.5 M

Communications processor

Communications processor 
CP 5711 USB adapter (USB V2.0) 
forconnection of a PG or 
Notebook to PROFIBUS or MPI
contain 2 mUSB cable

COMMUNICATIONS PROCESSOR

SIMATIC NET
SINEC CP, COMMUNICATIONS PROCESSOR 
CP 5430 TF (A2), 
SINEC L2 INTERFACE FOR CONNECT. 
SIMATIC S5 PROGR
CONTROLLERS 115U
135U, 155U HARDWARE CP5430 (A1) 
ATTENTION: CONFIGURATION ONLY WITH 
SYSTEM SOFTWARE COM5430 TF

Mounting rai

SIMATIC S7-300
mounting rail, 
length: 160 mm

Central processing unit

SIMATIC S7-1500
CPU 1517-3 PN/DP
Central processing unit 
with work memory2 MB for 
Program and 8 MB for data
1st interface: PROFINET IRT with 2-portswitch
2nd interface: PROFINET RT
3rd interface: PROFIBUS
2 ns bitperformance
SIMATIC Memory Card required

System bundle

SIMATIC S7-400H
412-5H system bundle H-system 
with 1 x UR2-H, withoutmemory card
2 x PS407 UC120/230V
10 A, 4 x sync modules up to 10 m
2 xsync cables 1 m
2 x CPU 412-5H
in addition 2 memory cards and 
4 backupbatteries required

Micro Memory Card

SIMATIC S7
Micro Memory Card 
for S7-300/C7/ET 200
3, 3V Nflash
64 KB

Motherboard Control Panel

RAM: Suitable for real-time 
data processing.
Input Voltage: 24V DC or 110-240V AC
Communication Ports: Ethernet, RS232/RS485
Operating Temperature: 0°C to +60°C.
Storage Temperature: -20°C to +80°C.
Humidity: 5% to 95%, non-condensing

6ES7405-0DA01-0AA0

SIMATIC S7-400
power supply PS 405
4 A, 24/48/60 V DC
5 V DC/4 A

Analog output Module

SIMATIC S7-300
Analog output SM 332
isolated, 2 AO, U/I
resolution 11/12 bits
20-pole
Removing/inserting 
with active backplane bus possible

ANALOG INPUT MODULE

SIPLUS S7-300 
SM 331-20-pole -25...+70°C 
with conformal coatingbased on 
Analog input isolated 2 AI
Resolution 9/12/14 bits
U/I/thermocouple/resistor
alarm diagnostics
1x 20-pole
Removing/inserting with active backplanebus

PSU3400 POWER SUPPLY

SITOP PSU3400 
24 V/10 ASITOP PSU3400 
24 V/10 A Stabilized power supplies 
Input: DC 24 V(18...32 V) 
Output: DC 24 V/10 A

Memory card

SIMATIC S7
memory cards for S7-300
Shortdesign
5V Flash EPROM 4 MB

BOARD

ASKPCB 
The board complies with UL 796 standards
Flame rating: V-0, 
ensuring good fire resistance
Minimum conductor width: 0.28 mm
Maximum operational temperature: 130°C

AC DRIVE

AC DRIVE
MICROMASTER 440
45 AMP
3 PHASE
380-480 VAC
47-63 HZ
22 KW
30 HP

ROTARY ENCODER

ROTARY ENCODER
10-30 VDC
HTL
M8 THREADED SHAFT
12-PIN M16 CONNECTOR
1024 PPR
IP64