PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6ES7134-6GD01-0BA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Flexible current acquisition for two-wire and four-wire transmitters
Siemens 6ES7134-6GD01-0BA1 is a four-channel Standard analog current input module for SIMATIC ET 200SP. Each channel can be configured for a two-wire or four-wire transmitter. Supported ranges include 0 to 20 mA and 4 to 20 mA, with bipolar measurement available in four-wire operation.
The module provides configurable diagnostics, selectable interference suppression and digital smoothing. Optional quality information adds one status byte to the input data. Two-wire and four-wire channels use different supply paths, with isolation from the electronics supply available only for four-wire transmitter inputs.
The module provides configurable diagnostics, selectable interference suppression and digital smoothing. Optional quality information adds one status byte to the input data. Two-wire and four-wire channels use different supply paths, with isolation from the electronics supply available only for four-wire transmitter inputs.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · TEXTILE MANUFACTURING
Natural and Manufactured Fibers
Natural fiber production and processing within the textile industry.Manufactured fiber production for the wider textile manufacturing sector. -
02 · FOOD & BEVERAGE
Dairy, Bakery and Confectionery
Dairy production and processing within the commercial food industry.Bakery and confectionery manufacturing across diverse consumer food categories. -
03 · WATER & WASTEWATER
Drinking Water and Wastewater Services
Drinking water production for public and community supply services.Wastewater treatment serving households, communities and industrial water users.
Technical specifications for 6ES7134-6GD01-0BA1
-
Product Model6ES7134-6GD01-0BA1
-
Product ParametersFour Channel Current Input Module
-
In stock1 unit
-
ManufacturerSiemens
-
Analog input channels4 differential current inputs
-
Current measuring ranges0 to 20 mA and 4 to 20 mA for two- or four-wire transmitters; +/-20 mA for four-wire transmitters
-
BaseUnit compatibilityBU types A0 and A1; module color code CC03
-
Rated supply voltage24 V DC; permissible range 19.2 to 28.8 V DC
-
Current input resistance100 ohm; two-wire operation additionally has approximately 0.7 V diode forward drop
-
Input address space8 bytes; optional quality information occupies 1 additional byte
-
Conversion time per channel180 ms at 16.6 Hz, 60 ms at 50 Hz or 50 ms at 60 Hz interference suppression
-
Digital smoothingNone, weak, medium or strong; factors of 1, 4, 8 or 16 module cycles
-
Current measurement error limits+/-0.3% of input range at 25 C; +/-0.5% over the operating temperature range
-
Two-wire transmitter burdenMaximum 650 ohm
-
Shielded cable lengthMaximum 1000 m
-
Transmitter supply24 V with short-circuit protection; 20 mA, with maximum 50 mA per channel for less than 10 seconds
-
Module power lossTypically 0.85 W, excluding transmitter supply
-
Electrical isolationInputs isolated from the backplane; isolation from electronics supply applies only to four-wire transmitters
-
Diagnostic interrupt supportSupply, range and module faults; wire break at 4 to 20 mA; transmitter short circuit in two-wire mode
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ET 200SP STANDARD CURRENT INPUTS
Coordinate transmitter wiring, timing and quality handling
Start with the actual transmitter connection rather than the current range alone. Two-wire and four-wire arrangements use different input terminals and supply paths, although they can be combined across the module. Select a supported A0 or A1 BaseUnit, begin the load group with a light BaseUnit, and configure each channel consistently with its wiring.
Choose interference suppression and smoothing to suit the required response. The per-channel conversion time changes with the selected frequency, and module cycle time includes the active channels and additional processing. Smoothing adds a further response delay. It also affects when wire-break diagnosis becomes stable, so diagnostic timing must be considered alongside measurement filtering.
Allocate eight input bytes and an additional byte if quality information is enabled. Evaluate the quality bits before accepting measurements: this module can invalidate all channel quality bits after one channel fault. Short circuits involving the two-wire transmitter supply can also temporarily influence other channels. Commission the application with known inputs and controlled fault tests.
Features:
- Connection-specific terminal selection
- Filtering-aware response assessment
- Module-wide quality evaluation
The Siemens 6ES7134-6GD01-0BA1 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Identify the installed order number, hardware functional status and firmware before specifying a replacement. The manufacturer distinguishes the single-unit -0BA1 order code from the ten-unit -2BA1 pack. Retain the exact electrical variant and verify engineering support; the source does not establish unconditional interchangeability with another current-input module or an earlier suffix.
Review the BaseUnit, potential group and each channel's two-wire or four-wire terminal assignment before reconnecting the electronics. Check transmitter supply, current range, filtering and diagnostic selections in the project. Isolation from the electronics supply applies only to four-wire transmitters; it must not be assumed for a channel configured and wired in two-wire mode.
After replacement, qualified personnel should validate known input values, quality information and fault reporting using the applicable station instructions. Recheck any runtime parameter changes because STEP 7 settings become effective again after restart. Preserve the project's intended disabled-channel handling and confirm that required labels or shielding accessories are available rather than assuming they accompany the module.
Features:
- Exact variant and version check
- BaseUnit and supply-path review
- Restart and diagnostic validation
The Siemens 6ES7134-6GD01-0BA1 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Original terminal diagrams, configuration details and manufacturer safety context
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7134-6GD01-0BA1 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7134-6GD01-0BA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can two-wire and four-wire transmitters share the same module?
Yes. Siemens permits the connection options to be combined across channels. Configure each channel for its actual transmitter type and use the corresponding terminals in the wiring diagram. The load group must begin with a light BaseUnit; four-wire transmitters use their external supply arrangement. -
Why can all quality bits become invalid after a single-channel fault?
When quality information is enabled, one additional input byte contains the channel status bits. This module sets the value status of all channels to zero if a fault occurs on one channel. The application must evaluate this behavior instead of assuming that every unaffected channel keeps a valid quality bit. -
Does smoothing affect wire-break diagnosis?
Yes. With smoothing enabled, the module calculates values over several cycles and reports wire break only after the smoothed measured value is stable. Recovery also depends on the selected smoothing level. Wire-break diagnostics apply to the 4 to 20 mA range, not every current range. -
Do parameter changes made with WRREC survive a restart?
WRREC transfers data record 128 to change module parameters in RUN, but it does not change the STEP 7 parameters stored in the CPU. After restart, the STEP 7 settings apply again. If a transfer is rejected, the previous parameter assignment remains active and STATUS reports the error. -
Can the two-wire 0 to 20 mA setting measure negative current?
No. Siemens states that negative values are not possible in the two-wire 0 to 20 mA range, which therefore has no underrange or underflow. Bipolar +/-20 mA measurement requires the four-wire transmitter configuration and its corresponding terminal arrangement. -
Are identification labels and the shield connector included automatically?
The manual lists labeling strips, color identification labels, reference identification labels and the shield connector as separately ordered accessories. Confirm the required accessories and BaseUnit independently of the electronics module. The -0BA1 order code is the single-unit pack, distinct from the -2BA1 ten-unit pack.
READY TO VERIFY YOUR PART?
Get a 6ES7134-6GD01-0BA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
