Model: 51403393-200
Operating Voltage: 24V DC
Power Consumption: Low power design
Operating Temperature: 0°C to +60°C
Storage Temperature: -40°C to+85°C
CPU Type: High performance embedded processor, specifically optimized for control systems
Category: Control modules
Operating Voltage: 24V DC
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Power Consumption: Typical power consumption below 5W
CPU Type: High performance industrial control dedicated processor
Category: Control modules
Operating Voltage: 24V DC
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Power Consumption: Typical power consumption below 5W
CPU Type: High performance industrial control dedicated processor
Category: Control modules
Operating Voltage: 24V DC
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Power Consumption: Typical power consumption below 5W
CPU Type: High performance industrial control dedicated processor
Category: Pulse input module
Number of Channels: 8 Channels
Input Type: Pulse input, supports NPN and PNP input types
Input Frequency Range: 0 Hz to 100 kHz
Input Signal Voltage: 5V to 24V DC
Operating Voltage: 24V DC
Operating Temperature: -20°C to +60°C
Number of Channels:16 Channels
Output Type: Transistor or Relay Output
Max Output Voltage: 24V DC
Max Output Current: 0.5A
Power and Signal Isolation: 1000V
Channel Isolation: 500V inter channel isolation
Operating Voltage: 24V DC
Operating Temperature: -20°C to +60°C
Input Voltage: 100-120V or 200-240V
Output Voltage: 24V
Output Current :5A
Power Output: Up to 120W
Operating Temperature: -10°C to +55°C
Storage Temperature: -20°C to +70°C
Linear or rotary motion control valve
±0.5% of span (including linkages)
0.3% of span *1
Digital: FOUNDATION fieldbus
Supply voltage: 9 to 32V DC
Supply current: 17 mA (max)
140 to 700 kPa (20 to 100 psi)
0.32 Nm3/h (0.178 SCFM) at 140 kPa (20 psi) of air supply
6.6 Nm3/h (4.1 SCFM) at 140 kPa (20 psi) of air supply
-40 to 85 deg C (-40 to 185 deg F)
16-circuit source/sink input and output
For 3-wire electromechanical and solid-state sensors
Interfaces with several discrete DC actuators and sensors
Part of the Genius I/O product family
Two versions available: 24/48 VDC and 24 VDC versions
Input Voltage:24 V DC (±20%)
Power Consumption:≤ 5 W
Output Power:24 V DC to modules
Communication Ports:1 × RS-485
Data Rate:Up to 12 Mbps
Isolation:500 V AC
Harmony-07
Control Processor Module
High-performance processing unit for real-time control and data processing
Supports industrial communication protocols such as Modbus, Profibus, Ethernet/IP
24V DC
-20°C to +60°C
SPK800-PBA1-01
Cable
1.0 Meter
PBA800 interface
HN800 device interface
Supports TER8x0 terminator to redundant PBA800 adapters for connection
Digital signal transmission
TRL810K2
Terminal Module
8 channels
Analog or digital input/output, depending on the specific configuration
Typically 24V DC or as required by the system
20°C to +60°C
NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms
Time Resolution:1 ms
Isolation:1500 V AC
SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C
PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements
Product Type: Output Module
Power Consumption :Low Power Consumption
Communication Interface: Backplane Communication
Operating Temperature : 0°C to +55°C (32°F to 131°F)
Microcontroller: 16/32-bit processor
Connectors: DIN 41612
Analog Inputs: 4–16 channels
Digital Inputs: 8–24V DC
Relay Outputs:5A @ 30V DC
Power Consumption: 2–5W
Safety Category:Category 3 (EN 954-1)
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
IsolationReinforced isolation : 500 V AC
Series: Mark VIe
Number of Channels: 24
Inputs: 125 V dc, 15A
Input Impedance: 4-20 mA
Input Converter Resolution: 16-bit A/D Converter
Product Type: Dual Core Mark VIe Controller
Output Fuses 12 fuses: 250 Volt, 15 A
Output Converter: 12-bit
Temperature Operating: -30 to +65 C
Series: Mark VI
Part Number: IS200CSLAH4APR1
Product Type: Printed Circuit Board
Software Frame Rates: 10, 20 and 40 ms
Power Requirements: 128 VDC
Number of input channels: 24
Operating Temperature: 32 to 113ºF
Series: Mark VI
Part Number: IS200CSLAH1PR1
Product Type: Printed Circuit Board
Software Frame Rates: 10, 20 and 40 ms
Power Requirements: 128 VDC
Number of input channels: 24
Series: Mark VI
Part Number: IS200CSLAH1APR1
Product Type: Printed Circuit Board
Software Frame Rates: 10, 20 and 40 ms
Power Requirements: 125 VDC
Number of input channels: 24
Series: Mark VI
Product Type: VME Bus Master Communication Controller Board
Operating System: QNX
Power Requirements: +5 V dc, 6 A
Number of input channels: 24
Processor: TMS320C32 32-bit
Number of relay channels: 12
Trip Solenoid Rating: 125 V dc
Power supply voltage: 28 V dc
Dual-Port Memory: 32 Kbytes
Voltage Range: 18 - 32 VDC
Mounting: DIN-rail mounting
Series: Fanuc
Dimensions: Standard VME 6U Single Slot Form Factor
3.5-inch 1.44 MB Floppy Drive
Power consumption: Low Power
Number of Channels: 24
Inputs: 125 V dc, 15A
Input Impedance: 4-20 mA
Number of channels: 16 channels
Span: 0.3532 to 4.054 V
Common mode voltage range: 5 V
Maximum lead resistance: 15 ohm maximum
Fast scan: 40 ms (25 Hz)
Power consumption: Less than 12 W
Part No.: IS200VRTDH1DAB
Manufacturer: General Electric
Number of channels: 16 channels
Span: 0.3532 to 4.054 V
Common mode voltage range: 5 V
Maximum lead resistance: 15 ohm maximum
Fast scan: 40 ms (25 Hz)
Power consumption: Less than 12 W
Part No.: IS200VSVOH1BED
Manufacturer: General Electric
Power supply voltage: Nominal 24 V dc
LVDT accuracy: 1 percent with 14-bit resolution
LVDT input filter: Low pass filter
LVDT common mode rejection: CMR is 1 V, 60 dB
Magnetic PR pickup signa:l Generates 150 V p-p
Active PR Pickup Signal: Generates 5 to 27 V p-p
Series: Mark VI
Part No.: IS200VAOCH1BBA
Manufacturer: General Electric
Product Type: Analog Output Board
Output: 16 analog 20 mA outputs
Functional Abbreviation:VAOC
Manufacturer: General Electric
Part Number: IS200PAICH1B
Series: Mark VI Speedtronic
Functional Part Number: IS220PDIAH1B
Function: I/O Pack
Functional Acronym: PDIA
Series: Mark VIe
Product Type: Turbine Protection Board
Number of Inputs: 3
Number of Outputs: 6
Operating temperature: -30 to 65℃
Power Supply Voltage: 125 V
Series: Mark VIe
Product Type: Terminal Board
Technology: Surface mount
Number of outputs: Generator breaker coil, 5A at 125 V dc
Power supply voltage: Nominal 125 V dc to breaker coil
MPU pulse rate range: 2 Hz to 20 kHz
Series: Mark VIe
Product Type: Analog Output Module
Number of channels: 12
Common Mode Voltage Range: +5 V dc
Maximum Lead Resistance: 15Ω
Analog output current: 0-20 mA
Operating temperature: -30 to 65 °C
Size: 8.26 cm high x 4.18 cm
Frequency: 50 or 60 Hz
Series: Mark VIe
Product Type: Analog Output Module
Number of channels: 12
Common Mode Voltage Range: +5 V dc
Maximum Lead Resistance: 15Ω
Analog output current: 0-20 mA
Operating temperature: -30 to 65 °C
Frequency: 50 or 60 Hz
Series: Mark VIe
Function: Primary Turbine Protection DIN Rail Module
Operating Temperature: -40°C to +70°C
Controller and I/O module Redundancy: Simplex
Internal operating system: QNX
Operating Voltage: 9 V to 16 V dc
Power Consumption: 4 W
Analog outputs: 0 to 10 V
Configuration Software: ToolboxST
Ethernet Ports: 2 Ethernet ports
Series: Mark VIe
PCI bus: 32bit/33MHz
Product Type: Analog DIN Rail Input/Output Module
Number of channels: 12
A/D resolution: 16 bits
Number of inputs: 32 single-ended
Common Mode Voltage Range: +5 V dc
Maximum lead resistance: 15Ω max
Output Load: 500 Ω for 4-20 mA
Operating temperature: 0 to 70°C
Frequency: 50 or 60 Hz
Number of outputs 16-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 3.4 A minimum
Maximum leak current at output off status 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 120 to 685 Ω
Output response time 30 ms maximum
Blocking Voltage 4500 V DC
Reverse Voltage:30 V
Max RMS Current:4000 A
Peak Surge Current :32 kA
Turn-On Time: ≤ 3 µs
Turn-Off Time: ≤ 5 µs
Switching Loss: ≤ 15 kJ/s at 500 Hz
Input Channels:32
Galvanic Isolation:1000 VAC RMS
Isolation Technique:Optical (in IOM)
DI Power Voltage Range:18 to 30 VDC
ON Sense Voltage/Current:13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current:5 VDC (max) or 1.2 mA (max)
Input Impedance:4.2 K
Absolute Delay Across Input Filter and Isolation:5 ms ± 20%
VM600 series
Humidity: 5% to 95% non-condensing
Vibration: 0.15 g²/Hz (5 to 500 Hz)
Shock: 15 g (11 ms half-sine)
Operating Temperature Range: -20°C to +60°C (-4°F to +140°F)
Storage Temperature Range: -40°C to +85°C (-40°F to +185°F)
Rated Voltage:380–480 V AC, 3-phase (±10%)
Rated Current:100 A (at 40°C ambient)
Frequency:50/60 Hz
Leakage Current:< 5 mA (at 480 V AC)
Insulation Resistance:> 100 MΩ (500 V DC)
Dielectric Strength:3000 V AC
3-phase AC: 380–480 V AC
DC Bus Voltage:520–720 V DC
Power Rating:Typically 1–50 kW
Operating Temperature:-10°C to +50°C
Storage Temperature:-40°C to +85°C
