Thermocouples:Type J, K, T, etc.
RTDs:Pt100, Pt1000, etc
Analog Voltage:±10V, 0-10V
Analog Current:4-20mA
Resolution: 16-bit or higher
Sampling Rate: Up to 1 kS/s
Accuracy: ±0.1% FS (Full Scale)
Input Voltage Range:100–240V AC
DC input:24V DC
Output Voltage(s):24V DC
24V Output: 5A–10A
Total Power: 120W–250W
Voltage Regulation: ±1%
Ripple & Noise: <1% of output voltage
IMI220-411A001: 24 DI
Model Number: IMI220-411A001
Type: Digital Input Module
Number of Inputs: 24 channels
Input Voltage Range: Typically 24V DC
Input Current per Channel: 5-10 mA
Standard: 24V AC/DC ±10%
Optional: 110V AC
Power Consumption: ≤25W
Digital Inputs:24V DC
Analog Inputs:4-20mA / 0-10V
Relays Outputs:5A, 250V AC
Analog Outputs:4-20mA
RPC420 Panel Controller for each manual lever
RAM: 512MB (minimum)
Flash Storage: 4GB
2x Ethernet (10/100/1000 Mbps)
4x RS-232/RS-485 (configurable)
1x CAN bus
1x USB 2.0
Input Voltage: 24VDC
Power Consumption: 50W (typical)
Impulse withstand voltage:5 kV (1.2/50 µs)
Rated voltage:600 V
Accuracy:<0.05 % of measuring range
Nominal power consumption:2 VA
Operating altitude:≤ 2000 m
Power consumption:≤2.3 W
Rail:TS 35
Step response time:≤50 µs
Input voltage range : 18 to 30 VDC
No load on sensor side : ≤80 mA
20 mA load on sensor side : ≤120 mA
Output voltage dynamic range: 2 to 20 VDC
Output impedance : 20 Ω, protected against short-circuits
Power supply voltage rejection ratio
10 Hz to 400 Hz : ≥60 dB
400 Hz to 100 kHz : ≥30 dB
Output signal offset drift with temperature: ≤2 mV/°C
Secure M2M communication
Local logic execution
Memory:1 GB RAM + 8 GB Flash
USB:1x USB 2.0 host port
Power Supply:12-24V DC
Processor:ARM Cortex-A9 dual-core @ 1.0 GHz
links MTL8000 node to Profibus-DP host LAN
supports up to 24 I/O modules
HART process & status variables over Profibus-DP
extended diagnostics for module and channel status
LAN speeds of up to 6 Mbaud
non-volatile memory for configuration
software configurable via local port or Profibus host
HART® maintenance via Comms adaptor
Input Range: Typically ±10 V peak.
Input Range: Typically -2 V to -18 V DC
Acceleration/Velocity: DC to 10 kHz
Displacement (Eddy Current): 0 to 10 kHz
Dynamic Range: Typically > 80 dB
Voltage: Typically +15V DC
