ALL MANUFACTURERS

DIGITAL OUTPUT RELAY MODULE

DIGITAL OUTPUT RELAY MODULE
51308376-175
0.5 AMP
24 VDC
COATED
(51308376/175)

Redundant Power Supply

Power System (20A)
Redundant (2 power supplies)
120/240 VAC 
Include:
2PCS 51202343-001,Indication Cable 
2PCS 51199935-100,Power Adapter Board  
4PCS SPS5710-2-LF 51198685-100,Power Supply module
2PCS SPS5713 51199930-100, Rack TDI Power Transistor

Fiber Optic Remote I/O Termination Unit

Isolation Voltage:1.5 kV AC
Power Supply:24 V DC (±15%), 5 W typical
Redundancy:Dual fiber ports 
Fiber Interface:2x ST/PC connectors 
Data Rate:10 Mbps
Max. Distance:2 km 

Turbine Auto Sync Module

Input Voltages:100–120V AC
Voltage Diff: ±0.5%
Slip Freq: ±0.05 Hz
Operating Voltage:24/48/125V DC
Response Time:<20 ms

Turbine Protection Module

Operating Voltage:24/48/125V DC (±20%)
Response Time:<20 ms 
Speed Range:0–9999 RPM
Redundancy:2-out-of-3 (2oo3) voting logic
Overspeed Thresholds:2x Adjustable 
Input Signals:3x Magnetic Pickups (MPU) / Proximity Sensors
Trip Outputs:3x Relay Contacts (NO/NC, 5A @ 250V AC)

Analog Control Station

Operating Voltage:24V DC (±10%), 3W typical
Accuracy:±0.5% of full scale
Resolution:0.1% (for bargraph display)
Update Rate:100 ms
Isolation: 1.5 kV AC
MODE Switch: Toggle MAN/AUTO/CAS

Drive Unit Drive Controller

Control Platform:32-bit RISC processor with FPGA logic
Control Methods:DTC , Scalar, Vector
I/O Capacity:16x DI
Operating Voltage:24 V DC (±10%)
Power Consumption:25 W (typical)
Memory:2 GB Flash (firmware/logs)
    

Controller Module

Model: KUC755AE117 / 3BHB005243R0117
Product Type: Controller Module
Power Supply Voltage: 24V DC 
Operating Temperature: 0°C to +55°C
Storage Temperature: -20°C to +70°C
Humidity: Relative humidity 5% -95%

High voltage inverter board

Rated System Voltage:3300V AC (2.3–4.16 kV range)
DC Link Voltage:5600V DC (max)
IGCT Control :24x Gate driver channels 
Gate Drive Voltage:+20V / -5V
Auxiliary Power:24V DC (±10%), 150W
Isolation Voltage:6 kV AC 
Response Time:<2 µs 

Power Supply Module

SPW48113S1
POWER MODULE
2.5 AMP
100-120 V
50/60 HZ

Analog Input Module

Input Channels :16 Channels
A/D Converter Resolution:16 bits
Input Range:1 4-20 mA only (through 200 Ω)
Normal Mode Rejection Ratio, at 60 Hz:19 dB
Maximum Normal Mode Input: ± 30 Volts
Crosstalk, dc to 60 Hz (channel-to-channel):-60 dB
Input Scan Rate:50 ms

Analog Output Module

Power supply:24V DC
Rated Current:55mA at 24V
Power Consumption:1.32W at 20mA
Power/DCS to Field:1500 VAC
DCS side connections:
37 pin DSUB connector on CC-UGIA01
Voltage Input:24V DC
Interface to DCS:4 to 20mA with HART

MLink Control Unit

Model: M-Link (Motor Link)
Series: ABB MNS iS Intelligent MCC System
Processor:ARM Cortex-A9 @ 800 MHz
Memory:512 MB RAM, 4 GB Flash
MCC Bus Interface:MNS Connect
Operating Voltage: 110-240V AC (50/60 Hz)
Power Consumption:≤ 15 W

Drive Control Board

Control Methods:DTC 
Communication:Embedded
Operating Voltage:24 V DC (±10%)
Power Consumption:30 W (typical)
Memory:512 MB DDR3 RAM, 4 GB Flash