ALL MANUFACTURERS

3300 XL 11 mm Probe

3300 XL 11 mm Probe
1/2-20 UNFthread
without armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector 
with connectorprotector, FluidLoc cable
05 Multiple Approvals
Order in increments of 0.1 in
Threaded length configurations:
Maximum case length: 9.9 in
Minimum case length: 1.0 in
Example: 2 4 = 2.4 in

Interconnect Cable

Product Type : Interconnect Cable
Model : 16710 - TEIP11-PS I/P Converter, signal converter for standard signals, with power stage
Cable Length Option : 20 - 20 ft

3300 XL 8 mm Proximity Probes

3300 XL 8 mm Probe
M10 x 1 thread
without armor
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLoc
connector, standard cable
00 Not required

Probe Proximity Vibration

Proximity Vibration Probe
±0.25 mm to ±10 mm
Standard 4-wire or 2-wire
-40°C to +120°C 
4-20 mA

3300 XL 11 mm Extension Cable

080 8.0 meters (26.2 feet)
01 Armored cable
05 Multiple Approvals
Outputresistance50 Ω

3300 XL 8 mm Proximity

Tip Diameter: 8 mm
Cable Length: 130 inches (10.8 feet)
Measurement Range: Up to 2 mm (80 mils)
Linear Range: 0.25–2.0 mm (10–80 mils)
Output Sensitivity: -7.87 V/mm (-200 mV/mil)
Frequency Response: 0–10 kHz

16710 Interconnect Cables

3-conductor shielded 
22 AWG (0.5 mm2) 
armored cable with 3- socket plug at one end, 
terminal lugs at the other end
Minimum length of 3.0 ft (0.9 m),
 maximum length of 99 ft (30 m).
Cable Length Option in feet : 35 = 35ft

3300 5mm Proximity Probes

330171 3300 5mm Probe
1/4-28 UNFthread, without armor
0 0 = 0.0 in.
Minimum unthreaded length: 20 = 2.0 in
0 5 0.5 meter (1.6 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
0 0 Agency Approval Option

990 Vibration Transmitter

05 0-5 mils pp (0-125 μm pp)
50 5.0 meters (16.4 feet)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
05CSA Division 2, ATEX Zone 0
ATEXZone 2 and includes 
ABSmaritime approval

3300 NSv Extension Cable

3300 NSv Extension Cable
060 6.0 meters (19.7 feet)
06 FluidLoc cable without stainlesssteel armor
Extension cabledc resistance
Center conductor: 0.220Ω/m (0.067 Ω/ft)
Shield: 0.066 Ω/m (0.020Ω/ft)

3300 NSv Proximity Probes

330905  3300 NSv Probe
M10X1 thread,without armor
Minimum unthreaded length:80 mm
Minimum length: 130 mm
10 1.0 meter (39 in)
12 Miniature coaxial ClickLoc connector
FluidLoc cable

3300 NSv Extension Cable

060 6.0 meters (19.7 feet)
04With stainless steel armor
withFEP jacket
with connectorprotector
05 Multiple Approvals

Interconnect Cable

Impedance: Probable 50 Ohms
Voltage Rating: ≤30 V DC
Operating Temperature: -40°C to +85°C 
Shielding: Dual-layer (foil + braided shield) for robust EMI/RFI protection
Bend Radius: ≥10x cable diameter

3300 XL Standard Extension Cable

065 6.5 meters (21.3 feet)
01 With stainless steel armor, withFEP jacket
00 Not Required

Case ExpansionTransducer Systems

Input Power:+24 Vdc, 30 mA minimum
Input Power:+13.5 to +26 Vdcunregulated
30 mAminimum
Voltage:+1 to +6 Vdc, all models
Output Noise:<10 mV
135613-01 and -11 0.20 V/mm (5.0 V/in)

3300 XL 11 mm Extension Cable

3300 XL 11 mm Extension Cable 
080 8.0 meters (26.2 feet) 
11 Armored FluidLoc cable
05 Multiple Approvals

Emergency Shutdown Device

Ethernet-6 Ports:10/100 Mbps
Protocol :TCP/IP
Input Range:18-36 Vdc Voltage
Power Consumption:24 W Typical/35 W Maximum
Closed StateImpedance:57 KΩ Maximum
Open StateImpedance:187 KΩ Minimum
Internal WettingVoltage:10-15 Vdc
Input Resistance:150 KΩ Typical
Faulted InputTolerance:±40 V

KL3031X1-BA1 RTD Input Module

Vibration Monitors

DC Input :18~36 Vdc, max 7.5 W
Scale Factorrange:5 to 1000 mV/g
Full scale range: 2 to 80 g peak
Current SinkSource:3.3 mA ± 5%
Open CircuitVoltage:-21 to -24 Vdc
ConfigurableBandpass filter:0.2 Hz to 20 kHz
Supply Voltage :-22.8 to –25.2 Vdc
Maximum RatedCurrent:15 mA

330103 3300 XL 8 mm Probe

330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Example: 0 6 = 60 mm
Maximum case length: 250 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

Rack Interface I/O Module

RIM I/O Module with Modem Interface
Voltage: 24V DC (±10%)
Consumption: ≤15W
Analog Inputs:4–20mA
Digital Inputs:24V DC dry contact
RS-485:Modbus RTU @ 115.2kbps max

TRANSDUCER

0 1 ¼-28 UNF integral stud
0 5Multiple approvals (CSA, ATEX, IECEx,)
Sensitivity 2.5 mV/m/s2 (25 mV/g) ±5%.
AmplitudeLinearity ±1% to 735 m/s2 (75 g) peak.
TransverseSensitivity Less than 5% of axial.
Amplitude ofResonantPeak20 dB maximum