ALL MANUFACTURERS

PC BOARD ASSEMBLY

Main Processor:216MHz
Memory:512MB DDR3
A/D Conversion:16-bit, 1μs sampling
Analog Inputs:12x (±10V/4-20mA, 16-bit)
Digital I/O:24x (24V DC, opto-isolated)
Communication Ports 2x RS-485

PCB Assembled Board

Processors:3x PowerPC e500mc @ 800MHz
Memory:1GB DDR3 + 512MB Flash
Control Cycle:100μs (minimum)
A/D Resolution:16-bit 
Analog Inputs:16x (±10V/4-20mA)
Digital I/O:32x (24V DC, opto)
Communication:Ports 2x Gigabit Ethernet

PROFIBUS Fieldbus Interface

FieldBusPlug family of bus connectors
Current Rating: Up to 630A
Voltage: 1000V AC
Material: Tin-plated copper alloy
Protocol: PROFIBUS DP-V1
Speed: Up to 12 Mbps
Isolation: 1500V AC

Data Interface Board

Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation Voltage:1500V AC
Serial Ports:2x RS-485 (Modbus RTU)
Ethernet Ports:2x 10/100BASE-TX (Modbus TCP)
Protocols Supported:Modbus, IEC 60870-5-104, DNP3.0
Baud Rate:300-115200 bps

Standard Signal Condition Board

Number of Channels:8 
Input Types Supported:4-20mA, 0-10V
Input Impedance:250Ω (current)
Maximum Input:24mA
Common Mode Rejection:>100dB @ 50/60Hz
Accuracy:±0.1% of span 
Output Types:4-20mA (active/passive), 0-10V
Load Capacity:600Ω (current), 5mA (voltage)
Resolution:16-bit (0.0015% of span)
Update Rate:10ms per channel

High Level Analog Input Module

Inputs per module 16 
Input types V, mA
A/D Converter One per module
A/D Resolution 15 Bits
Update rate 100ms 
Long term Stability 0.1% per year
Channel Configuration Data Stored in non-volatile memory

Digital Output Module

Output Channels 32
Output Type SINK (Open Drain)
Load Voltage 15 30 VDC 
MaximumLoad Current 0.1 A per channel (Max)
Galvanic Isolation 1000 VAC RMS for System – to – 
Field isolation (user supplied field Power)
On-State Voltage 0v VDC (load current @ 0.1A max )
Off-State Voltage 24 V (typ),
Off-State Leak Current 100 µA (max)
Turn-On/Turn-Off Time 10 ms (max)

Current Output Module

Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Withstand voltage 1.5 kV AC between output signal and system for 1 minute

10 Slot Back plane

Data Rate:Up to 10 Mbps 
Signal Type:RS-485
Max Cable Length:100m
Termination:120Ω resistor
Cable Length:2m
Jacket Material:PUR (oil-/UV-resistant)
Bending Radius:≥5× cable diameter 

PCB Board

Operating Voltage:24-250V DC/AC
Power Consumption:5-15W
Isolation Voltage:2kV AC 
Signal Levels :5V TTL, 24V DC 
Layer Count:6-layer PCB

Control board

Operating Voltage:24-250V DC/AC
Power Consumption:8W 
Isolation Voltage:2kV AC
Digital Inputs:24V DC
Digital Outputs:5A @ 250V AC
Processor:32-bit RISC
Clock Speed:100 MHz
RAM:128 MB
Flash Memory:64 MB

CIRCUIT CARD

Operating Voltage:24–250V DC/AC
Power Consumption:5–10W (typical)
Isolation Voltage:2kV AC
PCB Layers:6-layer design
Digital I/O:24V DC

Excitation central processing unit

Processor Type:Dual PowerPC-based
Clock Speed:400 MHz (each core)
RAM:256 MB
Flash Memory:128 MB
Control Cycle Time:<1 ms
Analog Inputs:16 channels (0-10V, 4-20mA)
Digital Inputs:32 channels (24V DC)
Digital Outputs:24 channels (relay contacts)
Communication Ports 4 (Ethernet, RS-485, etc.)
Power Supply:24V DC (±10%)
Power Consumption:25W (typical)
Isolation Voltage:2000V AC

Temperature Input Module

Power Supply:24V DC
Power Consumption:3.5W (typical)
Isolation :500V AC 
Channels:8 
Input Resolution:16-bit 
Accuracy:±0.1% of span (RTD)
Sampling Rate:10 samples/sec 

Temperature Input Module

Power Supply:24V DC
Power Consumption:4W (max)
Isolation :500V AC
Input Impedance:>1MΩ 
Channels:8 
Resolution:24-bit ADC
Sampling Rate:10 samples/sec
Common Mode Rejection:>120dB @ 50/60Hz
mV Input:±50mV