AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330171-00-08-90-01-05
In Stock
Ships by Wednesday, July 8
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330171-00-08-90-01-05
-
Product Model330171-00-08-90-01-05
-
Product Parameters3300 5mm Probe, 1/4-28 UNFthread, without armor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.2x1x124cm
-
ManufacturerBently Nevada
-
Weight0.04 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option0.8 in
-
Total Length Option9.0 metres (29.5 feet)
-
Connector OptionMiniature coaxial ClickLocconnector with connectorprotector, standard cable
-
Agency Approval OptionMultiple Approvals
Description
The Bently Nevada 330171-00-08-90-01-05 is a 3300 5mm Proximity Probe with 1/4-28 UNF thread and without armor, designed as an integral component of the 3300 5mm Proximity Transducer System. The 330171-00-08-90-01-05 is designed for use in vibration and position measurement applications on fluid-film bearing machines, as well as Keyphasor measurement and speed measurement applications.
The Bently Nevada 330171-00-08-90-01-05 features a 1/4-28 UNF thread configuration and is supplied without armor, featuring a 75Ω cable with a maximum outside diameter of 2.8mm (0.11in). The 330171-00-08-90-01-05 has a 0mm unthreaded length and an 80mm overall case length, providing a compact probe body suitable for installations with limited mounting space or where the probe must be mounted flush with the machine surface.
The Bently Nevada 330171-00-08-90-01-05 features a 1/4-28 UNF thread configuration and is supplied without armor, featuring a 75Ω cable with a maximum outside diameter of 2.8mm (0.11in). The 330171-00-08-90-01-05 has a 0mm unthreaded length and an 80mm overall case length, providing a compact probe body suitable for installations with limited mounting space or where the probe must be mounted flush with the machine surface.
Alternative Names
330171-00-08-90-01-O5
330171-00-08-90-0I-05
330171-00-08-90-O1-05
330171-00-08-9O-01-05
330171-00-O8-90-01-05
330171-0O-08-90-01-05
33017I-00-08-90-01-05
330I71-00-08-90-01-05
33O171-00-08-90-01-05
330171-00-08-90-01-00
330171-00-08-90-01-CN
Information
Overview
Manuals
Application Notes
Product Applications
Cable & Electrical Connection
Features:
- 1/4-28 UNF Thread Without Armor
- 0mm Unthreaded Length with 80mm Overall Case Length
- 9.0 Metre Total Cable Length
- Miniature Coaxial ClickLoc Connector with Connector Protector
The probe operates as the sensing element of the 3300 XL 5 mm eddy current transducer system, detecting the distance between the probe tip and a conductive target surface through electromagnetic induction. The 5.0 mm probe tip diameter provides a linear measurement range of 1.0 mm (40 mils) with a standard gap setpoint of 0.5 mm (20 mils). System sensitivity is 7.87 V/mm (200 mV/mil) with ±5% tolerance, delivering an output voltage of -10 VDC to -24 VDC proportional to the probe-to-target gap.
The 330171-00-08-90-01-05 Bently Nevada 3300 5mm Probe, 1/4-28 UNFthread, without armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330171-00-08-90-01-05 3300 5mm Probe, 1/4-28 UNFthread, without armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 1/4-28 UNF-2A imperial thread enables direct mounting into imperial threaded bosses or adapters commonly used in North American machinery. The 0.0 inch unthreaded length indicates the probe tip is flush with the end of the threaded section, suitable for installations where the probe mounts directly against the target surface or through a thin mounting plate. The 0.8 inch overall case length is the shortest standard configuration, providing minimal probe extension for compact installations or confined spaces. The 9.0 meter total length includes the integral probe cable with a standard miniature coaxial connector for connection to extension cables or directly to the proximitor.
- Turbines: Monitors steam, gas, and hydro-turbine generator systems
- Compressors: Monitors large-scale axial, centrifugal, and industrial air compressors
- Pumps/Motors: Monitors process pumps, boiler feed pumps, and high-horsepower electric motors
- Balance-of-Plant: Monitors cooling tower fans, blowers, gearboxes, and agitators
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
ClickLoc™ Connectors: The probe, extension cable, and Proximitor sensor utilize gold-plated brass ClickLoc™ connectors.
Tool-Free Mating: Do not use wrenches or pliers to tighten these coaxial connectors. Simply align the connectors, push them together, and tighten them finger-tight until you hear a clear "click". This locks the mechanism to prevent loosening.
Extension Cable: The part number configuration denotes a total length of 5.0 meters (probe + extension cable). Always use a 75-ohm coaxial extension cable to maintain system impedance.
Technical notes
The Bently Nevada 330171-00-08-90-01-05 features a 9.0 metre (29.5 feet) total cable length, providing extended reach for installations where the monitoring equipment is located at a significant distance from the measurement point. The 330171-00-08-90-01-05 includes a miniature coaxial ClickLoc connector with connector protector already installed, providing corrosion-resistant, gold-plated brass connections that require only finger-tight torque and include a specially engineered locking mechanism to prevent loosening.
FAQs
-
What are the main applications for this sensor?
+It is primarily used to measure the static position and dynamic vibration of machinery shafts in hydrodynamic (fluid-film) bearings. It is also highly effective for speed and keyphase measurements. -
What is the normal operating gap voltage?
+When properly gapped and when the shaft is centered in the linear range, the normal DC gap voltage is typically between -9 V to -11 V DC. -
Does this probe have agency/hazardous area approvals?
+Yes. The -05 suffix denotes multiple hazardous area approvals, which typically include certifications for ATEX, IECEx, and CSA, permitting safe operation in potentially explosive gas and dust environments. -
Can I shorten or cut the 9.0m coaxial cable?
+No. The cable length forms an integral part of the transducer system's resonant circuit. Altering or cutting the cable (the combined probe and extension cable length of 9 m) will change the electrical characteristics and cause inaccurate vibration readings.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
330103-00-18-05-02-053300 XL 8 mm Probe, M10 x 1 Thread, with ArmourManufacturer: Bently NevadaView Details -
-
-
-
-
-
-
-
Product
Product Browsing History
-
330171-00-08-90-01-053300 5mm Probe, 1/4-28 UNFthread, without armorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN